Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/11266
Назив: Failure of the bucket wheel excavator buckets
Аутори: Bošnjak S.
Arsić M.
Gnjatovic N.
Milenović I.
Arsić, Dušan
Датум издавања: 2018
Сажетак: © 2017 Elsevier Ltd Buckets are a vital substructure of all digging machines, and are intended for the realisation of the fundamental machine function - soil excavation. This paper presents the results of the experimental-numerical investigation of the cause of the bucket wheel excavator SRs 470 buckets failure. The chemical composition and mechanical properties, the impact toughness, hardness, tendency to cracks and the microstructure were determined using appropriate tests. Experimental examinations of working and residual stresses were performed using strain gauges. The superposition of the experimentally determined working and residual stresses and the calculation of the total principal stresses were conducted using the originally developed procedure presented in this paper. The bucket working stress state was calculated by applying the linear finite element method. Conclusions based on the investigation results show that the main reasons for the buckets failure were the ‘design-in defects’ - oversights made during the procedures of geometrical shaping and material selection. Furthermore, high values of residual stresses, as well as the cold cracking observed on the welded joint of the knife and the bucket body, suggest that the ‘manufacturing-in defects’ also played a significant role in the failure. The superposition of influences of the ‘design-in defects’ and the ‘manufacturing-in defects’ has conditioned the appearance and propagation of long-term fatigue cracks, leading to the total destruction of the buckets. The fact that buckets' failure appeared due to oversights made during geometrical shaping, material selection and manufacturing further points to the importance of the critical approach implementation during the design phase of the earthmoving machines working devices.
URI: https://scidar.kg.ac.rs/handle/123456789/11266
Тип: article
DOI: 10.1016/j.engfailanal.2017.11.017
ISSN: 1350-6307
SCOPUS: 2-s2.0-85036450387
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

136

Број преузимања

2

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
PaperMissing.pdf
  Ограничен приступ
29.86 kBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.