Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/12621
Назив: The effect of water concentration in ethyl alcohol on the environmentally assisted embrittlement of austempered ductile irons
Аутори: Janjatovic P.
Eric Cekic, Olivera
Šidjanin L.
Balos S.
Dramicanin, Miroslav R.
Novakovic J.
Rajnovic, Dragan
Датум издавања: 2021
Сажетак: © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Austempered ductile iron (ADI) is an advanced cast iron material that has a broad field of application and, among others, it is used in contact and for conveyance of fluids. However, it is noticed that in contact with some fluids, especially water, ADI material becomes brittle. The most significant decrease is established for the elongation. However, the influence of water and the cause of this phenomenon is still not fully understood. For that reason, in this paper, the influence of different water concentrations in ethyl alcohol on the mechanical properties of ADI materials was studied. The test was performed on two different types of ADI materials in 0.2, 4, 10, and 100 vol.% water concentration environments, and in dry condition. It was found that even the smallest concentration of water (0.2 vol.%) causes formation of the embrittled zone at fracture surface. However, not all mechanical properties were affected equally and not all water concentrations have been critical. The highest deterioration was established in the elongation, followed by the ultimate tensile strength, while the proof strength was affected least.
URI: https://scidar.kg.ac.rs/handle/123456789/12621
Тип: article
DOI: 10.3390/met11010094
SCOPUS: 2-s2.0-85099050903
Налази се у колекцијама:Faculty of Mechanical and Civil Engineering, Kraljevo

Број прегледа

460

Број преузимања

25

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
10.3390-met11010094.pdf6.33 MBAdobe PDFСличица
Погледајте


Ова ставка је заштићена лиценцом Креативне заједнице Creative Commons