Particulate Matter Emission and Air Pollution Reduction by Applying Variable Systems in Tribologically Optimized Diesel Engines for Vehicles in Road Traffic

Abstract

Regardless of the increasingly intensive application of vehicles with electric drives, internal combustion engines are still dominant as power units of mobile systems in various sectors of the economy. In order to reduce the emission of exhaust gases and satisfy legal regulations, as a temporary solution, hybrid drives with optimized internal combustion engines and their associated systems are increasingly being used. Application of the variable compression ratio and diesel fuel injection timing, as well as the tribological optimization of parts, contribute to the reduction in fuel consumption, partly due to the reduction in mechanical losses, which, according to test results, also results in the reduction in emissions. This manuscript presents the results of diesel engine testing on a test bench in laboratory conditions at different operating modes (compression ratio, fuel injection timing, engine speed, and load), which were processed using a zero-dimensional model of the combustion process. The test results should contribute to the optimization of the combustion process from the aspect of minimal particulate matter emission. As a special contribution, the results of tribological tests of materials for strengthening the sliding surface of the aluminum alloy piston and cylinder of the internal combustion engine and air compressors, which were obtained using a tribometer, are presented. In this way, tribological optimization should also contribute to the reduction in particulate matter emissions due to the reduction in fuel consumption, and thus emissions due to the reduction in friction, as well as the recorded reduction in the wear of materials that are in sliding contact. In this way, it contributes to the reduction in harmful gases in the air.