Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/21705
Назив: Impact of influence of piston design parameters on the hydrodynamic characteristics of internal combustion engines—a numerical study
Аутори: Menacer, Brahim
narayan, s
Tuninetti, Víctor
Khatir, Tawfiq
Oñate Soto, Angelo
Osorio Laurencio, Liomnis
Abubakar, Shitu
Samuel, Joseph
Grujic, Ivan
Stojanovic, Nadica
Kaisan, Muhammad Usman
Часопис: Lubricants
Датум издавања: 2024
Сажетак: Piston top rings in the combustion engine play a crucial role in the overall hydrodynamic performance of engines, such as power loss, minimum film thickness and friction forces, by ensuring sealing and minimizing the leakage of burnt gases. This present paper examines the influence of four key parameters of the top ring, such as ring width, ring temperature, ring tension, and ring surface roughness on the hydrodynamic behavior at the ring/cylinder contact. These parameters play a significant role in the formation and maintenance of the oil film, directly influencing hydrodynamic indicators such as the minimum oil film thickness, friction force, power loss, oil pressure, and the ring angle twist. This article relies on hydrodynamic models and numerical simulations performed using GT-SUITE version 6 software to analyze these effects. The pressure curve used in this simulation is experimentally validated for an engine speed of 2000 RPM. It was found that an increase in the top ring temperature reduces the oil’s viscosity, decreasing the film thickness and increasing the risk of metal-to-metal contact. Increasing the roughness of the ring enhances oil film stability, especially at the bottom dead center (BDC) points during each phase of the operating cycle. Further, three different types of ring profiles were investigated for friction forces by varying the speed of the engine.
URI: https://scidar.kg.ac.rs/handle/123456789/21705
Тип: article
DOI: 10.3390/lubricants12120427
ISSN: 2075-4442
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

224

Број преузимања

3

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
lubricants-12-00427.pdf10.47 MBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.