Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/8308
Назив: Combustion monitoring in engines using accelerometer signals
Аутори: narayan, s
Milojević, Saša
Gupta V.
Датум издавања: 2019
Сажетак: © 2019 S. Narayan, et al. Recent regulations for emission control from combustion engines have led to focus on various methods to monitor control and the combustion process. The presented work explores the potential relationship between various combustion events monitored using in-cylinder pressure transducer and the resulting block vibration measured using accelerometers. Various features of combustion development process were derived from the vibration data acquired. The methodology was analyzed using a single cylinder diesel engine. The heat release data was able to detect and extracted various indicators of the combustion process like start of combustion and half of injected fuel positions. Higher correlation was observed for the data computed using heat release curve obtained from the in-cylinder pressure measurements and those obtained using the accelerometer signals. The proposed methodology can be used to optimize the fuel injection timing in order to reduce emissions from engines to comply with various regulations. The practical importance of presented work demonstrates use of monitoring of block vibration signals as a mean of non-intrusive methods of diagnosis of engine for its effective condition monitoring.
URI: https://scidar.kg.ac.rs/handle/123456789/8308
Тип: article
DOI: 10.21595/jve.2019.20516
ISSN: 1392-8716
SCOPUS: 2-s2.0-85073506292
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

161

Број преузимања

12

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
10.21595-jve.2019.20516.pdf1.67 MBAdobe PDFСличица
Погледајте


Ова ставка је заштићена лиценцом Креативне заједнице Creative Commons