Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/8355
Назив: Experimental and FE modeling investigation of spot welded thin steel sheets
Аутори: Zivkovic, Miroslav
Vukovic M.
Lazic, Vukic
Milovanović, Vladimir
Dunić, Vladimir
Kozak D.
Rakić, Dragan
Датум издавања: 2019
Сажетак: © 2019, Strojarski Facultet. All rights reserved. The spot welded thin steel sheets specimens are experimentally and numerically examined in this paper. The two specimens are joined using Resistance Spot Welding (RSW) method. The spot-welded joints consist of three zones with different material properties. Change of material properties during the welding process is caused by mechanical and thermal loading. The mechanical properties of thin steel sheets are determined by several tension tests. The specimens are cut in three different directions regarding a rolling direction of the basic material plate. Shear resistance of the spot welded joints is experimentally examined on the universal testing machine by displacement-controlled tensile loading tests. The numerical analysis is performed by large-strain plasticity theory implemented into a Finite Element Method based software. Comparison of the Finite Element (FE) modeling and experimental results verifies the proposed stress integration algorithm and modeling technique as powerful tools for prediction of the spot-welded joint behavior.
URI: https://scidar.kg.ac.rs/handle/123456789/8355
Тип: article
DOI: 10.17559/TV-20190113163316
ISSN: 1330-3651
SCOPUS: 2-s2.0-85063541733
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

169

Број преузимања

11

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
10.17559-TV-20190113163316.pdf1.56 MBAdobe PDFСличица
Погледајте


Ова ставка је заштићена лиценцом Креативне заједнице Creative Commons