Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://scidar.kg.ac.rs/handle/123456789/11888
Назив: | Electrical resistance spot brazing of two different alloys |
Аутори: | Lazic, Vukic ![]() ![]() Arsić, Dušan ![]() ![]() Djordjevic, Milan Nikolic, Ruzica Hadzima, Branislav ![]() |
Датум издавања: | 2016 |
Сажетак: | © 2016 Taylor & Francis Group, London. The general problems related to electrical resistance brazing of various metals were considered in this paper. In brazing different electrodes and technological parameters are used. For experimental purposes, electrodes were made of highly alloyed tungsten steel and of copper with graphite and tungsten inserts, so the symmetrical temperature field was obtained. Success of brazing was determined by testing the mechanical properties, micro hardness and microstructure of the brazed joint. Hardness measurement results suggested the strain hardening of the steel thin sheets, what imposed necessity of recrystallization annealing. It was necessary to apply both the flux and the silver solder for joining, since copper and iron are poorly mutually soluble. When the metallurgy problems were solved and the optimal brazing parameters selected, the optimal mechanical properties were achieved, which were experimentally confirmed. |
URI: | https://scidar.kg.ac.rs/handle/123456789/11888 |
Тип: | conferenceObject |
DOI: | 10.1201/b19249-20 |
SCOPUS: | 2-s2.0-84949895719 |
Налази се у колекцијама: | Faculty of Engineering, Kragujevac |
Датотеке у овој ставци:
Датотека | Опис | Величина | Формат | |
---|---|---|---|---|
PaperMissing.pdf Ограничен приступ | 29.86 kB | Adobe PDF | ![]() Погледајте |
Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.