Please use this identifier to cite or link to this item:
Title: Electrical resistance spot brazing of two different alloys
Authors: Lazic, Vukic
Arsić, Dušan
Djordjevic, Milan
Nikolic, Ruzica
Hadzima, Branislav
Issue Date: 2016
Abstract: © 2016 Taylor & Francis Group, London. The general problems related to electrical resistance brazing of various metals were considered in this paper. In brazing different electrodes and technological parameters are used. For experimental purposes, electrodes were made of highly alloyed tungsten steel and of copper with graphite and tungsten inserts, so the symmetrical temperature field was obtained. Success of brazing was determined by testing the mechanical properties, micro hardness and microstructure of the brazed joint. Hardness measurement results suggested the strain hardening of the steel thin sheets, what imposed necessity of recrystallization annealing. It was necessary to apply both the flux and the silver solder for joining, since copper and iron are poorly mutually soluble. When the metallurgy problems were solved and the optimal brazing parameters selected, the optimal mechanical properties were achieved, which were experimentally confirmed.
Type: conferenceObject
DOI: 10.1201/b19249-20
SCOPUS: 2-s2.0-84949895719
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)




Files in This Item:
File Description SizeFormat 
  Restricted Access
29.86 kBAdobe PDFThumbnail

Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.