Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://scidar.kg.ac.rs/handle/123456789/16839
Назив: | Optimization of A356/10SiC/3Gr Hybrid Composite Wear Using Taguchi Method |
Аутори: | Stojanovic, Blaza Babic, Miroslav |
Датум издавања: | 2014 |
Сажетак: | In present study, the tribological behavior of hybrid composites with A356 aluminum alloy matrix reinforced with 10 wt% of SiC and 3 wt% of graphite was investigated using the Taguchi method. The composites were produced by the compocasting procedure. The tribological properties were studied using block-on-disk tribometer under unlubricated sliding conditions at different normal loads (40N, 80N and 120N), sliding speeds (0.25 m/s, 0.5 m/s and 1 m/s) and sliding distances (150 m, 300 m and 1200 m). Analysis of the wear rate results was performed using the ANOVA technique. The highest influence on wear rate was obtained for sliding distance (39.44%). The influence of normal load and sliding speed was 27.96% and 14.12%, respectively. The lowest level of wear rate corresponded to the contact conditions with normal load of 40N, sliding speed of 1.0 m/s and sliding distance of 1200 m. |
URI: | https://scidar.kg.ac.rs/handle/123456789/16839 |
Тип: | conferenceObject |
Налази се у колекцијама: | Faculty of Engineering, Kragujevac |
Датотеке у овој ставци:
Датотека | Опис | Величина | Формат | |
---|---|---|---|---|
Stojanovic_Balkantrib14_Taguchi.pdf | 731.86 kB | Adobe PDF | Погледајте |
Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.