Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/16839
Title: Optimization of A356/10SiC/3Gr Hybrid Composite Wear Using Taguchi Method
Authors: Stojanovic, Blaza
Babic, Miroslav
Issue Date: 2014
Abstract: In present study, the tribological behavior of hybrid composites with A356 aluminum alloy matrix reinforced with 10 wt% of SiC and 3 wt% of graphite was investigated using the Taguchi method. The composites were produced by the compocasting procedure. The tribological properties were studied using block-on-disk tribometer under unlubricated sliding conditions at different normal loads (40N, 80N and 120N), sliding speeds (0.25 m/s, 0.5 m/s and 1 m/s) and sliding distances (150 m, 300 m and 1200 m). Analysis of the wear rate results was performed using the ANOVA technique. The highest influence on wear rate was obtained for sliding distance (39.44%). The influence of normal load and sliding speed was 27.96% and 14.12%, respectively. The lowest level of wear rate corresponded to the contact conditions with normal load of 40N, sliding speed of 1.0 m/s and sliding distance of 1200 m.
URI: https://scidar.kg.ac.rs/handle/123456789/16839
Type: conferenceObject
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

33

Downloads(s)

9

Files in This Item:
File Description SizeFormat 
Stojanovic_Balkantrib14_Taguchi.pdf731.86 kBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.