Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating

Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/17210

Назив:	Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating
Аутори:	Kakaš, Damir Skoric, Branko Babic, Miroslav Mitrovic, Slobodan Miletic, Aleksandar Vilotic, Marko Terek, Pal Kovačević L.
Датум издавања:	2009
Сажетак:	Influence of surface roughness of TiN coatings on friction and wear phenomena was investigated. Wear and friction properties were evaluated by using CSM nanotribometer. Relatively low loads were used during testing, therefore wear depth was less than 20 % of TiN coating thickness. Obtained results show that TiN coatings of higher hardness and lower friction coefficient can be produced by IBAD comparing to TiN coatings deposited by industrial PVD. Scanning electron and atomic force microscopy provide detailed analysis of nanochanges of wear zone morphology.
URI:	https://scidar.kg.ac.rs/handle/123456789/17210
Тип:	article
ISSN:	1451-2092
Налази се у колекцијама:	Faculty of Engineering, Kragujevac