Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating

Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/17210

Title:	Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating
Authors:	Kakaš, Damir Skoric, Branko Babic, Miroslav Mitrovic, Slobodan Miletic, Aleksandar Vilotic, Marko Terek, Pal Kovačević L.
Journal:	FME Transaction
Issue Date:	2009
Abstract:	Influence of surface roughness of TiN coatings on friction and wear phenomena was investigated. Wear and friction properties were evaluated by using CSM nanotribometer. Relatively low loads were used during testing, therefore wear depth was less than 20 % of TiN coating thickness. Obtained results show that TiN coatings of higher hardness and lower friction coefficient can be produced by IBAD comparing to TiN coatings deposited by industrial PVD. Scanning electron and atomic force microscopy provide detailed analysis of nanochanges of wear zone morphology.
URI:	https://scidar.kg.ac.rs/handle/123456789/17210
Type:	article
ISSN:	1451-2092
Appears in Collections:	Faculty of Engineering, Kragujevac