Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/13825
Full metadata record
DC FieldValueLanguage
dc.rights.licenseBY-NC-ND-
dc.contributor.authorBaralić, Jelena-
dc.contributor.authorJanković, Predrag-
dc.contributor.authorPopović, Marko-
dc.date.accessioned2022-01-31T23:05:29Z-
dc.date.available2022-01-31T23:05:29Z-
dc.date.issued2019-
dc.identifier.citationBaralić, J., Janković, P., & Popović, M. (2019). Effect of traverse speed on cut frontgeometry in abrasive water jet machining. IMK-14 - Istraživanje i razvoj, 25(1), 27-30. https://doi.org/10.5937/IMK1901027Ben_US
dc.identifier.issn0354-6829en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/13825-
dc.description.abstractAbrasive water jet machining is an unconventional machining process, which is increasingly being used. It is suitable for cutting complex contoured elements, in all types of materials. The major disadvantages of this machining technique are ununiform quality of the machined surface at different depths of cut, lagging of the cut front of the machined surface from the vertical plane and the phenomenon of striation patterns on the cut surface. The striation patterns on machined surface are the trail of the abrasive water jet through the material, and as such, they represents the cut front. Striation may result in different flaws occurring at cutting closed contours and may cause irregularities at cutting angles. The objective of this paper was to determine traverse speed and depth of cut effect on the cut front geometry i.e. on the striation geometry. The experiments were carried out on 6 mm and 10 mm thick samples of aluminum alloy AA 6060 (EN AW-6060; ISO AlMgSi). Samples were machined with several traverse speeds. The lagging of the cut front, at different depths of cut, was measured and analyzed. The obtained results enabled us to define the influence of traverse speed on striation geometry.en_US
dc.language.isosren_US
dc.publisherFaculty of Mechanical and Civil Engineeringen_US
dc.relationThe research of modern non-conventional technologies application in manufacturing companies with the aim of increase efficiency of use, product quality, reduce of costs and save energy and materials (MESTD - 35034)en_US
dc.rightsopenAccess-
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/-
dc.sourceIMK-14 - Istrazivanje i razvojen_US
dc.subjectObrada abrazivnim vodenim mlazomen_US
dc.subjectgeometrija prednje linije rezaen_US
dc.titleEffect of traverse speed on cut frontgeometry in abrasive water jet machiningen_US
dc.title.alternativeUticaj brzine rezanja i dubine reza na geometriju prednje linije reza pri obradi abrazivnim vodenim mlazomen_US
dc.typearticleen_US
dc.description.versionPublisheden_US
dc.identifier.doi10.5937/IMK1901027Ben_US
dc.type.versionPublishedVersionen_US
Appears in Collections:Faculty of Technical Sciences, Čačak

Page views(s)

38

Downloads(s)

4

Files in This Item:
File Description SizeFormat 
0354-68291901027B.pdf1.95 MBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons