Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/10277
Назив: Using specially designed high-stiffness burnishing tool to achieve high-quality surface finish
Аутори: Tadić B.
Todorovic, Petar
Luzanin O.
Miljanic D.
Jeremic B.
Bogdanović B.
Vukelic, Djordje
Часопис: International Journal of Advanced Manufacturing Technology
Датум издавања: 1-јул-2013
Сажетак: This paper is focused on the process of ball burnishing. The influence of tool stiffness on surface roughness parameters was considered theoretically, while experimental investigation was conducted to establish the influence of initial surface roughness (previous machining) on the effects of ball burnishing as the finishing process. Experimental investigations were conducted over a wide interval of most influential process parameters (burnishing forces, burnishing feed, and number of burnishing passes). The material used in the experiments was aluminum alloy EN AW-6082 (AlMgSi1) T651. Burnishing was performed using a specially designed tool of high stiffness. Statistical analysis of experimental data revealed strong correlation between roughness, R a, and burnishing force, burnishing feed, and number of passes for the three surfaces, each with different roughness parameters. Particular combinations of process parameters yielded very low surface roughness, R a, equivalent to polishing. It is worth noting that high surface quality can be achieved with relatively small burnishing forces, which differs from the investigations published so far. Contrary to conventional approaches, which are based on elastic tool systems, the authors propose the burnishing process to be conducted with high-stiffness tools. Further investigation shall be focused on optimization of burnishing process parameters in order to achieve surface finish equivalent to high polish. © 2012 Springer-Verlag London Limited.
URI: https://scidar.kg.ac.rs/handle/123456789/10277
Тип: article
DOI: 10.1007/s00170-012-4508-2
ISSN: 02683768
SCOPUS: 84888356341
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

64

Број преузимања

4

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
PaperMissing.pdf
  Ограничен приступ
29.86 kBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.