Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/10648
Назив: Mechanical and electrical properties of the Bi-Ge-Sn alloys
Аутори: Dordević A.
Premovic, Milena
Minic D.
Tomovic, Marina
Radičević, Branko
Kolarević, Nenad
Часопис: Metallurgical and Materials Engineering
Датум издавања: 1-јан-2020
Сажетак: © 2020, Association of Metallurgical Engineers of Serbia. All rights reserved. Mechanical and electrical properties of the ternary Bi-Ge-Sn alloys were investigated in this study. Calculation of isothermal section at 200, 300, and 25 ºC was carried out by using optimized thermodynamic parameters for the constitutive binary systems. Microstructures of alloys were observed by using optical microscopy and scanning electron microscopy (SEM). Phases in microstructures have been detected by X-ray diffraction (XRD) analysis and compositions of the phase by energy dispersive spectrometry (EDS). EDS results were compared with the predicted isothermal section at 200 and 300 ºC, and good agreement has been reached between them. The Brinell hardness and electrical conductivity of selected alloys were measured. Through ANOVA analysis and application of the obtained results, an appropriate mathematical model is proposed for every composition of alloys. By using the appropriated mathematical model for Brinell hardness and electrical conductivity, isolines for those properties were presented.
URI: https://scidar.kg.ac.rs/handle/123456789/10648
Тип: Article
DOI: 10.30544/562
ISSN: 22178961
SCOPUS: 85099353047
Налази се у колекцијама:Faculty of Mechanical and Civil Engineering, Kraljevo
[ Google Scholar ]

Број прегледа

18

Број преузимања

3

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
10.30544-562.pdf1.12 MBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.