Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/10733
Title: Modelling of Cutting Forces in Hard Steel Turning
Authors: Pavel K.
Mirfad T.
Nedic, Bogdan
Borislav S.
Dušan Golubovic
Dušan J.
Issue Date: 2020
Abstract: © Springer Nature Switzerland AG 2020. The aim of this study is to investigate the effect of machining parameters on cutting resistance during hard steel turning. This paper describes a novel approach in cutting resistance modeling using a design experiment. The output of the processing should take into account the cutting resistance they measured when testing the range of speeds, displacements, and depth of bursting. Mathematical models have been obtained that have been shown to have high confidence that they can approximate the measurement results. The connection between cutting forces in terms of changing the parameters of the cutting mode, as well as the undesirable occurrence and wear of the tool, which is certainly present in the process of removing hard-working material, is given.
URI: https://scidar.kg.ac.rs/handle/123456789/10733
Type: conferenceObject
DOI: 10.1007/978-3-030-46817-0_24
ISSN: 2367-3370
SCOPUS: 2-s2.0-85085158783
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

484

Downloads(s)

9

Files in This Item:
File Description SizeFormat 
PaperMissing.pdf
  Restricted Access
29.86 kBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.