Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/10800
Назив: Optical inspection of cutting parts by 3D scanning
Аутори: Lazarevic D.
Nedic, Bogdan
Jović M.
Sarkocevic Z.
Blagojevic Milan
Датум издавања: 2019
Сажетак: © 2019 Elsevier B.V. In this paper was presented 3D scanning application of dimensional inspection of parts obtained by cutting process. The dimensional and geometric deviations of cylindrical shoots of aluminum alloy parts, machined by applying different milling parameters, were measured using the coordinate measuring machine (CMM), PC DMIS software, three different optical scanners and GOM Inspect software. Results obtained using CMM were selected for reference and their comparison with the results obtained with scanners was conducted. It was noted that the differences between measured deviations exist and that further research should be focused on more precise defining and monitoring of conditions in measurement environment as well as the selection of the method of approximation and surface processing in order to increase the accuracy of the inspection with the 3D scanning device. A brief overview of the inspection procedure, inspection devices, scanning and surface reconstruction was also provided as well as the existing software applications for inspection.
URI: https://scidar.kg.ac.rs/handle/123456789/10800
Тип: article
DOI: 10.1016/j.physa.2019.121583
ISSN: 0378-4371
SCOPUS: 2-s2.0-85068875027
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

487

Број преузимања

11

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
PaperMissing.pdf
  Ограничен приступ
29.86 kBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.