Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/11690
Title: Amorphous Fe<inf>72</inf>Cu<inf>1</inf> V<inf>4</inf>Si<inf>15</inf>B<inf>8</inf> ribbon as magneto-impedance sensing element
Authors: Surla Radoslav
Mitrovic, Nebojsa
Đukic Slobodan
Ibrahimović Vedran
Issue Date: 2016
Abstract: Magneto-impedance (MI) effect in the Fe72CuiV4Sii5B8 amorphous ribbon obtained by melt spinning method has been studied. The aim of study was the characterisation of this ribbon in as-cast state in terms of its application as a MI sensor. The experiments on MI elements were performed in the frequency range from 30 kHz to 300 MHz and maximum external magnetic field up to 28.6 kA/m. Maximum observed MI-ratio (δZ = Z(0) - Z(Hmax), Hmax = 28.6 kA/m) has amounted to δZ/Z(Hmax) = 173% at a frequency of 20.46 MHz. The MI curve measured up to 20 MHz shows some shoulder indicating the growth of rotational contribution of magnetization that appears above the domain wall relaxation frequency. The MI profile at frequencies higher than 30 MHz, exhibits a clear peak positioned at transverse anisotropy field Hk, suggesting domination of rotation magnetization in transverse permeability. The linearity in the range up to 5 kA/m with sensitivity of about 11 %/kA/m was observed.
URI: https://scidar.kg.ac.rs/handle/123456789/11690
Type: article
DOI: 10.2298/SJEE1603381S
ISSN: 1451-4869
SCOPUS: 2-s2.0-85018865094
Appears in Collections:Faculty of Technical Sciences, Čačak

Page views(s)

120

Downloads(s)

7

Files in This Item:
File Description SizeFormat 
1451-48691603381S.pdf4.39 MBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons