Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/11761
Назив: Definition and determination of the bus oscillatory comfort zones
Аутори: Sekulic, Dejan
Dedovic V.
Rusov S.
Obradovic, Aleksandar
Šalinić, Slaviša
Датум издавања: 2016
Сажетак: © 2016 Elsevier B.V. The paper defines equal oscillatory comfort zones as a novel concept in the sphere of the bus vertical dynamics. Oscillatory zones are determined using the original and validated oscillatory model of the intercity bus and comfort criteria according to the international ISO 2631/1997 standard requirements. The bus spatial oscillatory model with 65 degrees of freedom (DOF) was built in the ADAMS/View module of the multibody software package MSC.ADAMS. The model was excited by two different real road surfaces: poor asphalt-concrete and good asphalt-concrete pavements, registered at the speed of 64 km/h and 90 km/h respectively. It was found by simulation that oscillatory zones with different comfort assessments exist in the bus. The most comfortable oscillatory zone is in the middle part of the bus (between the front and the rear axle), whereas the least comfortable oscillatory zone is on the rear bus overhang. For the purpose of the ride comfort harmonization, using Design of Experiments (DOE) analysis, new oscillatory parameters are proposed for passenger seats which do not ensure satisfactory oscillatory comfort level. It is concluded that harmonization of oscillatory comfort for all bus passengers could be achieved for good asphalt-concrete excitation. For the poor road excitation it is possible to achieve significant improvement of comfort, especially for the assistant driver and passengers in the bus rear overhang. On a poor asphalt-concrete pavement, by using the proposed seat oscillatory parameters, the allowed exposure time for vertical whole body vibration would be considerably extended. Relevance to industry: Oscillatory comfort has a particular importance for users of intercity buses traveling longer distances. Comfort assessment of each bus user and mapping of comfort zones can indicate the individual seat and group of the seats on which the oscillatory comfort is reduced. Proper selection of seat oscillatory parameters can improve users comfort. Results of such an analysis can significantly help bus designers and manufacturers in order to improve and harmonize oscillatory comfort on the whole vehicle platform.
URI: https://scidar.kg.ac.rs/handle/123456789/11761
Тип: article
DOI: 10.1016/j.ergon.2016.04.003
ISSN: 0169-8141
SCOPUS: 2-s2.0-84962910896
Налази се у колекцијама:Faculty of Mechanical and Civil Engineering, Kraljevo

Број прегледа

126

Број преузимања

7

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
PaperMissing.pdf
  Ограничен приступ
29.86 kBAdobe PDFСличица
Погледајте


Ставке на SCIDAR-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.