Please use this identifier to cite or link to this item:
Title: Effect of electrodeposition current density on the microstructure and magnetic properties of nickel-cobalt-molybdenum alloy powders
Authors: Pešić O.
Spasojevic M.
Jordović, Branka
Spasojević P.
Maricic, Aleksa
Issue Date: 2014
Abstract: Nanostructured nickel-cobalt-molybdenum alloy powders were electrodeposited from an ammonium sulfate bath. The powders mostly consist of an amorphous phase and a very small amount of nanocrystals with an mean size of less than 3 nm. An increase in deposition current density increases the amorphous phase percentage, the density of chaotically distributed dislocations and internal microstrains in the powders, while decreasing the mean nanocrystal size. The temperature range over which the structural relaxation of the powders deposited at higher current densities occurs is shifted towards lower temperatures. A change in relative magnetic permeability during structural relaxation is higher in powders deposited at higher current densities. Powder crystallization takes place at temperatures above 700oC. The formation of the stable crystal structure causes a decrease in relative magnetic permeability.
Type: article
DOI: 10.2298/SOS1401117P
ISSN: 0350-820X
SCOPUS: 2-s2.0-84899682147
Appears in Collections:Faculty of Technical Sciences, Čačak

Page views(s)




Files in This Item:
File Description SizeFormat 
0350-820X1401117P.pdf569.12 kBAdobe PDFThumbnail

This item is licensed under a Creative Commons License Creative Commons