SCIDAR - A Digital Archive of the University of Kragujevac
A digital archive of the University of Kragujevac contains easily searchable and up-to-date research results.
Please use this identifier to cite or link to this item:
https://scidar.kg.ac.rs/handle/123456789/16604Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.rights.license | Attribution-NonCommercial 3.0 United States | * |
| dc.contributor.author | Miladinovic, Slavica | - |
| dc.contributor.author | Velickovic Sandra | - |
| dc.contributor.author | Novakovic, Milan | - |
| dc.date.accessioned | 2023-02-17T11:39:38Z | - |
| dc.date.available | 2023-02-17T11:39:38Z | - |
| dc.date.issued | 2016 | - |
| dc.identifier.issn | 2466-4847 | en_US |
| dc.identifier.uri | https://scidar.kg.ac.rs/handle/123456789/16604 | - |
| dc.description.abstract | An experimental research is performed in this study in order to optimize the parameters of planetary driving gear. An orthogonal array and analysis of variance (ANOVA) are employed to investigate the factors: material, module and gear width on the safety coefficient for surface durability. Statistical methods of signal to noise ratio and ANOVA with 95% confidence were applied to quantify the effects of considered factors as well as to obtain the minimum value of the safety coefficient for surface durability. The results of this analysis have shown that the gear module with 80.953% has the greatest influence on the safety coefficient for surface durability of the gear. The second influential factor is a gear width with 18.392%. And the material with 0.615% has the least influence on the safety coefficient for surface durability of the gear. The regression analysis is also shown in the study. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | The Association of Intellectuals for the Development of Science in Serbia – “The Serbian Academic Center” | en_US |
| dc.rights | info:eu-repo/semantics/openAccess | - |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc/3.0/us/ | * |
| dc.source | Applied Engineering Letters | - |
| dc.subject | Planetary gear | en_US |
| dc.subject | optimization | en_US |
| dc.subject | Taguchi method | en_US |
| dc.subject | ANOVA | en_US |
| dc.subject | regression analysis | en_US |
| dc.title | APPLICATION OF TAGUCHI METHOD FOR THE SELECTION OF OPTIMAL PARAMETERS OF PLANETARY DRIVING GEAR | en_US |
| dc.type | article | en_US |
| dc.description.version | Published | en_US |
| dc.type.version | PublishedVersion | en_US |
| Appears in Collections: | Faculty of Engineering, Kragujevac | |
 | Page views(s)483 | Downloads(s)87 |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| AEL00017.pdf | 1.2 MB | Adobe PDF |  View/Open |
This item is licensed under a Creative Commons License
