Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/16985
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDelić, Marko-
dc.contributor.authorMandic, Vesna-
dc.contributor.authorPopović, Marko-
dc.date.accessioned2023-03-06T13:53:28Z-
dc.date.available2023-03-06T13:53:28Z-
dc.date.issued2021-
dc.identifier.issn1846-6168en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/16985-
dc.description.abstractIn this paper, the research results of the stability of steel welded tubes forming process are presented. The aim of this research is to determine influence of geometrical and tribological parameters on stability of the process and to determine optimal values of influential process parameters. A research plan with variation of influential parameters was made, on the basis of which experimental and numerical experiments were performed. Tube forming was performed in one operation in a two-part tool made of hard metal by a combination of widening and narrowing. The geometrical factors observed during experiments are length, outer diameter and thicknesses of steel welded tube as a billet. Friction conditions in contact between tool and tubular workpiece are considered in two cases, the first one when standard machine oil is used as a lubricant and the second one when tube billet surface is phosphated. Based on results of experiments, influencing factors on stability of tube forming process were analysed and optimal production technology was recommended, including optimal values of influencing factors. Results obtained by experimental research were confirmed through numerical experiments based on finite element method.en_US
dc.language.isoenen_US
dc.relation.ispartofTECHNICAL JOURNALen_US
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subjectnarrowingen_US
dc.subjectnumerical analysisen_US
dc.subjectsteel welded tubesen_US
dc.subjectwideningen_US
dc.titleStability Analysis of Steel Welded Tubes Forming Process Using Numerical Simulationsen_US
dc.typearticleen_US
dc.description.versionPublisheden_US
dc.relation.conferenceMOTSP 2021 – 12th International Conference Management of Technology – Step to Sustainable Productionen_US
dc.type.versionPublishedVersionen_US
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

49

Downloads(s)

175

Files in This Item:
File Description SizeFormat 
MOTSP-tj_15_2021_2_298-304.pdf1.85 MBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons