Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/17007
Пун извештај метаподатака
Поље DC-а ВредностЈезик
dc.rights.licenseAttribution-NonCommercial 3.0 United States*
dc.contributor.authorJosifović, Danica-
dc.contributor.authorIvanović, Lozica-
dc.date.accessioned2023-03-07T06:57:15Z-
dc.date.available2023-03-07T06:57:15Z-
dc.date.issued2008-
dc.identifier.isbn88-901080-3-7en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/17007-
dc.description.abstractMethodology for selection of optimal shape of trochoidal gear tooth profile applied at gerotor pumps is presented in the paper. The first part of the paper presents the general procedure for generation of gearing with profiles described by epitrochoid equidistant and corresponding coupled envelope. Next, geometrical and kinematical conditions which should be fulfilled by profiles were defined in order to achieve proper coupling. Dependences between geometrical gearing parameters and functional characteristics of the pump were determined. In order to assess maximal contact stresses, analysis of forces and moments is conducted with application of analytical and numerical methods. The influence of the profiles with technological gaps on volumetric losses of the pump was identified through investigation of profile characteristics. In order that derived models and functional dependences for determination of output parameters may be used as flexible and reliable as possible, their generalization is conducted. Described methodology is illustrated on the example of the actual pump and the obtained solution is proposed as optimal for given conditions 1. Based on theoretical considerations, physical models of gears were made and simulation experiment performed, wherewith the results of the analysis of the functional characteristics of the pump and described methodology were entirely verified.en_US
dc.language.isoenen_US
dc.rightsinfo:eu-repo/semantics/openAccess-
dc.rights.urihttp://creativecommons.org/licenses/by-nc/3.0/us/*
dc.sourcest Symposium on Multidisciplinary studies of Design in Mechanical Engineering, Bertinoro, Italyen_US
dc.subjecttrochoidal gearen_US
dc.subjectgerotor pumpen_US
dc.subjectepitrochoid equidistanten_US
dc.subjectenvelopeen_US
dc.titleDesign of the new gear tooth profile of the trochoidal gearingen_US
dc.typeconferenceObjecten_US
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

777

Број преузимања

14

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
Bertinoro 2008.pdf7.26 MBAdobe PDFСличица
Погледајте


Ова ставка је заштићена лиценцом Креативне заједнице Creative Commons