Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке: https://scidar.kg.ac.rs/handle/123456789/20378
Пун извештај метаподатака
Поље DC-а ВредностЈезик
dc.rights.licenseAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.contributor.authorAleksandrovic, Srbislav-
dc.contributor.authorVUJINOVIĆ, Tomislav-
dc.contributor.authorStefanovic, Milentije-
dc.contributor.authorLazic, Vukic-
dc.contributor.authorDjordjevic, Milan-
dc.contributor.authorArsić, Dušan-
dc.date.accessioned2024-03-25T10:14:10Z-
dc.date.available2024-03-25T10:14:10Z-
dc.date.issued2014-
dc.identifier.citationS. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, M. Đorđević, D. Arsić, Influence of variable drawbead height and variable contact pressure in Al alloy sheet strip drawing process, 5th International Conference on Manufacturing Engineering (ICMEN 2014), Thessaloniki, Greece, 2014, 1-3 october, pp. 71-78, ISBN 978-960-98780-9-8en_US
dc.identifier.isbn978-960-98780-9-8en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/20378-
dc.description.abstractAn electro-hydraulic computer controlled device was created for the realization of the sheet metal strip drawing test. Its main property is realization of contact pressure and drawbead height as different functions dependent on stripe travel or time. In addition, it is also possible to measure drawing force, pressure, drawbead displacement etc. Experimental study of chosen drawbead height and contact pressure functions influence in strip sliding test are presented in this paper. The strips are made of Al alloy sheet metal AlMg4.5Mn0.7 of 0,9 mm thickness. Strip dimensions are 250 x 30 mm. Drawbead geometry, with rounding radii of 2 and 5 mm, is also varied. Drawbead thickness is 10 mm. On contact surfaces mineral oil was applied. The results indicate that acting of combined action of constant pressure with variable drawbead height and constant drawbead height with variable contact pressure, in addition to other conditions, can influence substantially the plastic flow process.en_US
dc.description.sponsorshipThe work reported in this paper was partially financially supported by the Serbian Ministry of Education and Science, through contract TR 34002. The authors are very grateful for this funding.en_US
dc.language.isoen_USen_US
dc.publisherAristoteles University of Thessalonikien_US
dc.rightsinfo:eu-repo/semantics/openAccess-
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.source5th International Conference on Manufacturing Engineering (ICMEN 2014), Thessaloniki, Greeceen_US
dc.subjectAl alloy sheet metalen_US
dc.subjectStrip testen_US
dc.subjectVariable pressureen_US
dc.subjectAdjustable drawbeadsen_US
dc.titleInfluence of variable drawbead height and variable contact pressure in Al alloy sheet strip drawing processen_US
dc.typeconferenceObjecten_US
dc.description.versionPublisheden_US
dc.type.versionPublishedVersionen_US
Налази се у колекцијама:Faculty of Engineering, Kragujevac

Број прегледа

778

Број преузимања

13

Датотеке у овој ставци:
Датотека Опис ВеличинаФормат 
ICMEN 2014 Greece_scaned paper.pdf10.13 MBAdobe PDFСличица
Погледајте


Ова ставка је заштићена лиценцом Креативне заједнице Creative Commons