Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/20444
Full metadata record
DC FieldValueLanguage
dc.contributor.authorIvanović, Slobodan-
dc.contributor.authorPetrović, Aleksandra-
dc.contributor.authorLukić, Ljubomir-
dc.contributor.editorGašić, Milomir-
dc.date.accessioned2024-03-29T12:20:35Z-
dc.date.available2024-03-29T12:20:35Z-
dc.date.issued2015-
dc.identifier.issn0354-6829en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/20444-
dc.descriptionIMK 14 - 2015en_US
dc.description.abstractPeripheral pocket or contour milling using flat end milling tool can be performed using different tool paths. Engagement angle, radial and axial depth of cut are key machining parameters which influence cutting force value and directly depend of tool path itself. Knowledge of these parameters values along the tool path is necessary for simulation and monitoring of cutting force during machining process. For that purpose, module for machining parameters generation along tool path is developed and briefly explained here. Key machining parameters are generated based on workpiece – tool interaction during tool movement, which indicate that it is necessary to have information about size and shape of blank workpiece and to import that information in program in useful format. This paper present detail description of geometrical representation of blank which transforms blank from bitmap image to matrix record suitable for determination of its intersection with tool. Module for machining parameters generation along tool path presents necessary base for development of methodology for choosing the most adequate tool path for machining of given contour considering minimum cutting force and dynamic stability.en_US
dc.description.sponsorshipThe Ministry of Education, Science and Technological Development of the Republic of Serbiaen_US
dc.description.urihttps://www.imk14-rad.com/index.php/sr/en_US
dc.language.isoenen_US
dc.publisherInstitut IMK "14. oktobar" Kruševacen_US
dc.relation.ispartofIMK-14 – Research & Development in Heavy Machineryen_US
dc.subjecttool pathen_US
dc.subjectmatrix description of blanken_US
dc.subjectperipheral millingen_US
dc.titleMatrix Blank Description as Part of Module for Machining Parameters Generation along the Tool Path for Peripheral Millingen_US
dc.typearticleen_US
dc.description.versionPublisheden_US
dc.type.versionPublishedVersionen_US
Appears in Collections:Faculty of Mechanical and Civil Engineering, Kraljevo

Page views(s)

22

Downloads(s)

5

Files in This Item:
File Description SizeFormat 
2015_IMK 14 - Ivanović S. et al..pdf1.4 MBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.