Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/20553
Full metadata record
DC FieldValueLanguage
dc.rights.licenseAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.contributor.authorArsić, Dušan-
dc.contributor.authorLazic, Vukic-
dc.contributor.authorNikolic, Ruzica-
dc.contributor.authorHadzima, Branislav-
dc.date.accessioned2024-04-08T12:07:25Z-
dc.date.available2024-04-08T12:07:25Z-
dc.date.issued2016-
dc.identifier.citationD. Arsić, V. Lazić, R. Nikolić, B. Hadzima, Estimate of weldability of the hot work tool steels via the CCT diagrams, International journal of interdisciplinarity in theory and practice, Vol.10, No.-, pp. 1-7, ISSN 2344-2409, 2016en_US
dc.identifier.issn2344-2409en_US
dc.identifier.urihttps://scidar.kg.ac.rs/handle/123456789/20553-
dc.description.abstractWeldability represents a very complex property of a material that shows its ability to form a welded joint of certain characteristics, by application of the adequate welding procedure. It can be determined in several ways. The procedure of weldability estimate, based on the transformation diagrams of continuous cooling (CCT-diagrams) and the measured temperature cycles, is presented in this paper. The objective was to determine the weldability to be able to define the optimal hard-facing technology of the thermo stable steels. The temperature cycles were measured and then the obtained values for the critical cooling time t8/5 were entered into the CCT diagrams to estimate the hardness and microstructure of the welded joint's zones. Those two parameters are indicators of the steel's weldability. Experiments were conducted on the multi-layered hard-faced samples made of the steel for manufacturing of the forging dies.en_US
dc.description.sponsorshipThis research was partially supported by the Ministry of Education and Science of Republic of Serbia through Grants TR35024 and OI174004 and by European regional development fund and Slovak state budget by the project "Research Centre of the University of Žilina" - ITMS 26220220183.en_US
dc.language.isoen_USen_US
dc.publisherEditura Adoramen_US
dc.rightsinfo:eu-repo/semantics/openAccess-
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.sourceInternational journal of interdisciplinarity in theory and practice-
dc.subjectThermoresistant steelsen_US
dc.subjectweldability estimateen_US
dc.subjecthard-facingen_US
dc.subjecttemperature cyclesen_US
dc.subjecttime t8/5en_US
dc.titleEstimate of weldability of the hot work tool steels via the CCT diagramsen_US
dc.typearticleen_US
dc.description.versionPublisheden_US
dc.type.versionPublishedVersionen_US
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

362

Downloads(s)

14

Files in This Item:
File Description SizeFormat 
1- Arsic D.- Lazic V. - Nikolic R.- Hadzima B..pdf633.94 kBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons