Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/11340
Title: Estimation of tool wear according to cutting forces during machining procedure
Authors: Anicic O.
Jović V.
Stanojevic N.
Marsenic M.
Pejovic B.
Nedic, Bogdan
Journal: Sensor Review
Issue Date: 1-Jan-2018
Abstract: © 2018 Emerald Publishing Limited. Purpose - The main purpose of the study was to analyze the relationship between cutting forces and tool wear during turning of steel 30CrNiMo8. Design/methodology/approach - It is very important to find the optimal machining conditions to increase the tool life and to improve product quality. Width of tool wear was measured by universal microscope. Findings - During experimental procedure, one chip shape was obtained for the given machining parameters. Results showed negligible tool wear for the given experimental conditions. In other words, the tool wear is negligible for one chip shape. Originality/value - To increase tool wear, there are different chip shapes.
URI: https://scidar.kg.ac.rs/handle/123456789/11340
Type: article
DOI: 10.1108/SR-07-2017-0147
ISSN: 02602288
SCOPUS: 85043301879
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

64

Downloads(s)

1

Files in This Item:
File Description SizeFormat 
PaperMissing.pdf
  Restricted Access
29.86 kBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.