Please use this identifier to cite or link to this item:
Title: Analysis of welding of the rear bridge semi-housing assembly of a firefighter truck by the semi-automatic procedure in gas protection
Authors: Lazic, Vukic
Nikolic, Ruzica
Arsić, Dušan
Arsić M.
Popović O.
Prokic-Cvetkovic R.
Hadzima, Branislav
Issue Date: 2021
Abstract: The problem considered in this paper is the welding technology of the steel assembly of a firefighter truck rear bridge semi-housing. Since in this procedure the welding is done of the two dissimilar steels, it is necessary to analyze effects of welding on mechanical properties and microstructure of individual joint's zones. The weldability of the base metal was considered first (semi-housing tube and flange), then the welding method and the filler metal were selected and, finally, the technological parameters of welding were calculated. The computational and experimental methods were used for the base metal weldability estimate, based on the hardness measurements in the joint's critical zones and analysis of their structures. Experimental investigations performed were aimed for verification and/or eventual correction of the proposed welding technology.
Type: conferenceObject
DOI: 10.1016/j.trpro.2021.07.020
ISSN: 2352-1457
SCOPUS: 2-s2.0-85112641123
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)




Files in This Item:
File Description SizeFormat 
  Restricted Access
29.86 kBAdobe PDFThumbnail

Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.