Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/13601
Title: Influence of the ringer's solution on wear of vacuum mixed poly(Methyl methacrylate) bone cement in reciprocating sliding contact with aisi 316l stainless steel
Authors: Zivic, Fatima
Grujovic N.
Mitrovic, Slobodan
Tanaskovic, Jovan
Todorovic, Petar
Journal: Hemijska Industrija
Issue Date: 1-Jan-2021
Abstract: This paper presents microstructural properties and damage behaviour of a vacuum mixed poly(methyl metacrylate) (PMMA) bone cement, during the sliding contact with AISI 316L stainless steel, under micro-loads. Influence of the Ringer's solution on the wear was analysed in comparison to dry contact. The variation of load did not produce any significant change of the wear factor while the increase in the sliding speed induced significant increases in the wear factor, more pronounced in the case of dry sliding. The obtained wear factors were in average higher for the sliding in Ringer's solution than those obtained under dry conditions. Significant fragmentation of the worn tracks, of irregular shapes with broken edges, was observed, slightly more pronounced for the dry contact. Many cavities and voids were formed on the wear track surface, but they did not extend into the bulk material. Higher loads produced more uniform and less fragmented wear tracks. Abrasive, adhesive wear and plastic deformation grooves were observed, as well as fatigue and erosive wear. Fatigue cracks developed in the direction normal to sliding. Network of fine craze cracks was exhibited on the surface of wear tracks, especially pronounced in the case of dry sliding. These results are important since they contribute to understanding the sites of crack initiation, and development mechanisms on the surface of PMMA bone cements, also including synergistic effects of physiological environments pertaining to the non-steady crack and craze behaviour and crack pattern development in PMMA.
URI: https://scidar.kg.ac.rs/handle/123456789/13601
Type: Article
DOI: 10.2298/HEMIND210105011Z
ISSN: 0367598X
SCOPUS: 85108620256
Appears in Collections:Faculty of Engineering, Kragujevac
[ Google Scholar ]

Page views(s)

55

Downloads(s)

6

Files in This Item:
File Description SizeFormat 
10.2298-HEMIND210105011Z.pdf1.44 MBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.