Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/16288
Title: APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF ZINC BASED COMPOSITE
Authors: Miloradović, Nenad
Stojanovic, Blaza
Mitrovic, Slobodan
Velickovic Sandra
Issue Date: 2019
Abstract: Tribological behaviour of composite with the ZA-27 alloy base reinforced by 5% SiC is considered in this paper. The optimization of tribological behaviour was conducted using the Taguchi method. Composite was prepared by the compocasting procedure. Tribological experiments were carried out using a block on disc tribometer with the variation of three different load values (10, 20 and 30 N), three sliding speed values (0.25, 0.5 and 1 m/s) and sliding distance value of 600 m. All the experiments were conducted under dry sliding test conditions. The analysis of the wear rate was executed using the ANOVA method of analysis. The sliding speed has the greatest impact on the wear rate (81.72%), then the SiC content (11.07%), and the least the contact load (5.07%).
URI: https://scidar.kg.ac.rs/handle/123456789/16288
Type: article
DOI: 10.24874/PES01.01.014
ISSN: 2620-2832
SCOPUS: 2-s2.0-85097763372
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

432

Downloads(s)

9

Files in This Item:
File Description SizeFormat 
PaperMissing.pdf
  Restricted Access
29.86 kBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.