Optimization of tribological properties in A356/10SiC/5Gr hybrid composite using Taguchi method

Abstract

In present study, the tribological behavior of hybrid composites with A356 aluminum alloy matrix reinforced with 10 wt.% of SiC and 5 wt.% of graphite was investigated using the Taguchi method. The composites were produced by the compocasting procedure. The tribological properties were studied using block-on-disk tribometer under lubricated sliding conditions at different normal loads (40N, 80N and 120N), sliding speeds (0.25 m/s, 0.5 m/s and 1 m/s) and sliding distances (150 m, 300 m and 1200 m). Analysis of the wear rate results was performed using the ANOVA technique. The lowest level of wear rate corresponded to the contact conditions with normal load of 40N, sliding speed of 1.0 m/s and sliding distance of 1200 m.