Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/20591
Title: Generating parameters from the NC code needed for defining the optimal tool path
Authors: Petrović, Aleksandra
Ivanović, Slobodan
Lukić, Ljubomir
Issue Date: 2015
Abstract: CAM packages are able to generate several different tool paths for multi-axis NC machining of one pocket or contour. Using the optimal toolpath a minimum cutting force, the maximum dynamic stability of the process and minimum tool wear are achieved or some other technological requirements are met. To determine the optimum tool path it is necessary to establish analytical dependence between optimization criteria and machining elements that are determined by specific tool path. In the NC program the basic technological, kinematic and geometric data are contained but not the elements that depend on the tool path, such as cutting depth, width of cut and engagement angle of the cutting tool. This paper presents a NC code transformation methodology and generation of tool path parameters necessary for calculating all elements of contour milling machining process.
URI: https://scidar.kg.ac.rs/handle/123456789/20591
Type: conferenceObject
Appears in Collections:Faculty of Mechanical and Civil Engineering, Kraljevo

Page views(s)

350

Downloads(s)

9

Files in This Item:
File Description SizeFormat 
2015_MMA - Petrović A. et al..pdf1.12 MBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.