Please use this identifier to cite or link to this item:
Title: Qualification of the welding technology of the structural steel S355J2G3
Authors: Lazic, Vukic
Arsić, Dušan
Ilic I.
Aleksandrovic, Srbislav
Nikolic, Ruzica
Djordjevic, Milan
Hadzima, Branislav
Issue Date: 2018
Abstract: © Published under licence by IOP Publishing Ltd. The selection procedure and qualification of the optimal welding technology for the structural steel S355J2G3 are presented in this paper. The considered steel is widely applied for manufacturing the supporting structures in various areas, especially in civil and mechanical engineering. It is delivered mainly in form of plates of various thicknesses and solid profiles of various diameters. Considering that welding is mostly used in manufacturing of structures, it is very important to be aware of possibilities for this steel welding, as well as of problems that may arise during that process. Here are presented: a calculation procedure of the base metal's weldability, selection of the filler metal and the welding technology, with results of experimental testing of the base metal and welded samples. The following experimental investigations were performed: tensile, bending and impact toughness test, metallographic investigations and hardness measurement. All the samples were cut out from the welded plates. Obtained results have shown that the structural steel S355J2G3 is suitable for welding, since there is no danger of appearance of cracks or other defects. With adequate choice of the welding technology the mechanical properties of the welded joint can be comparable to those of the base metal.
Type: conferenceObject
DOI: 10.1088/1757-899X/419/1/012019
ISSN: 1757-8981
SCOPUS: 2-s2.0-85054239918
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)




Files in This Item:
File Description SizeFormat 
10.1088-1757-899X-419-1-012019.pdf1.24 MBAdobe PDFThumbnail

This item is licensed under a Creative Commons License Creative Commons