Characterization of FeCoV alloy processed by PIM/MIM route

Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/8882

Title:	Characterization of FeCoV alloy processed by PIM/MIM route
Authors:	Nedeljković B. Mitrovic, Nebojsa Orelj, Jelena Obradovic, Nina Pavlović, Vladimir
Issue Date:	2017
Abstract:	© 2016 Authors. In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370 °C to 1460 °C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370 °C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.
URI:	https://scidar.kg.ac.rs/handle/123456789/8882
Type:	article
DOI:	10.2298/SOS1703299N
ISSN:	0350-820X
SCOPUS:	2-s2.0-85037849540
Appears in Collections:	Faculty of Technical Sciences, Čačak