Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/14221
Title: Effects of machining and heat and surface treatments on as built DMLS processed Maraging Steel
Authors: Croccolo, Dario
De Agostinis, Massimiliano
Fini, Stefano
Olmi, Giorgio
Robusto, Francesco
Ćirić Kostić, Snežana
Vranić, Aleksandar
Muharemović, Nusret
Bogojevic, Nebojsa
Issue Date: Jun-2018
Abstract: The main motivations for this study arise from the need for an assessment of the fatigue performance of DMLS produced Maraging Steel MS1, when it is used in the “as fabricated” state. The literature indicates a lack of knowledge from this point of view, moreover the great potentials of the additive process may be more and more incremented, if an easier and cheaper procedure could be used after the building stage. The topic has been tackled experimentally, investigating the impact of heat treatment, machining and micro-shot-peening on the fatigue strength with respect to the “as built” state. The results indicate that heat treatment significantly enhances the fatigue response, probably due to the relaxation of the post-process tensile residual stresses. Machining can also be effective, but it must be followed (not preceded) by micro-shot-peening, to benefit from the compressive residual stress state generated by the latter.
URI: https://scidar.kg.ac.rs/handle/123456789/14221
Type: conferenceObject
Appears in Collections:Faculty of Mechanical and Civil Engineering, Kraljevo

Page views(s)

34

Downloads(s)

6

Files in This Item:
File Description SizeFormat 
15_2018_ICTAEM_Croccolo.pdf289.69 kBAdobe PDFThumbnail
View/Open


Items in SCIDAR are protected by copyright, with all rights reserved, unless otherwise indicated.