Please use this identifier to cite or link to this item: https://scidar.kg.ac.rs/handle/123456789/8531
Title: Reducing the melting and sublimation of the galvanized sheets zinc layer during the laser beam cutting
Authors: Mesko J.
Nigrovic R.
Nikolic, Ruzica
Issue Date: 2018
Abstract: © 2018 Institute of Physics Publishing. All rights reserved. The presented research is dealing with principles and technology of the laser cutting. The properties of the CO2 laser beam, input parameters of the laser cutting, assist gasses, interaction with the cut material and the cutting process stability are described. Influence of the heat from the laser beam on degradation of the zinc surface layer, which serves as the anti-corrosive protection of the lower carbon steel, is considered in this paper. In the experimental part of this research, the two most important laser cutting parameters were experimentally changed, namely the type of the assist gas - O2 and N2 and the cutting speed.
URI: https://scidar.kg.ac.rs/handle/123456789/8531
Type: conferenceObject
DOI: 10.1088/1757-899X/393/1/012096
ISSN: 1757-8981
SCOPUS: 2-s2.0-85051854827
Appears in Collections:Faculty of Engineering, Kragujevac

Page views(s)

66

Downloads(s)

4

Files in This Item:
File Description SizeFormat 
10.1088-1757-899X-393-1-012096.pdf635.18 kBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons