| |
article
|
1. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles, null (ISSN 0354-8996) TI_2008_33-39.pdf
|
2. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Tribometry of Materials for Bioengineering Applications, null (ISSN 0354-8996) TI_32_1_25-32.pdf
|
3. Miroslav B., Mitrovic Slobodan, Zivic Fatima, Bobic Ilija, Wear behavior of composites based on ZA-27 alloy reinforced by Al 2O 3 particles under dry sliding condition, null, 10.1007/s11249-010-9613-5 (ISSN 1023-8883)
|
4. Zivkovic Miroslav, Aleksandar Nikolic, Slavkovic Radovan, Zivic Fatima, Non-linear transient heat conduction analysis of insulation wall of tank for transportation of liquid aluminum, null, 10.2298/TSCI100506029Z (ISSN 0354-9836) 0354-98361000029Z.pdf
|
5. Zivic Fatima, Babic Miroslav, Cvijović-Alagić Ivana, Mitrovic Slobodan, Vencl Aleksandar, Wear Behaviour of Ti6Al4V Alloy Against Al2O3 Under Linear Reciprocating Sliding, Journal of the Balkan Tribological Association, null (ISSN 1310-4772) 2.14a.pdf
|
6. Babic Miroslav, Mitrovic Slobodan, Zivic Fatima, Effects of Al2O3 particle reinforcement on the lubricated sliding wear behavior of ZA-27 alloy composites, null, 10.1007/s10853-011-5664-8 (ISSN 0022-2461)
|
7. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Gulišija Z., Zivkovic Miroslav, Djačić Slaviša, Zivic Fatima, Analysis of the surface state of tools influence on the ironing process, null, 10.2478/v10211-011-0011-2 (ISSN 0354-3870) 130-Journ of Tech of Plast --2011.pdf
|
8. Erić Milan, Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Pantić Marko, Application of Contemporary Information Technologies in Nanotribometry, null (ISSN 1584-2665) TI_2011_4_159-163.pdf
|
9. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Todorovic Petar, Interpretation of the Friction Coefficient During Reciprocating Sliding of Ti6Al4V Alloy Against Al2O3, null (ISSN 0354-8996) TI_2011_1_36-42.pdf
|
10. Zivic Fatima, Babic Miroslav, Favaro G., Caunii Mihaela, Grujovic Nenad, Mitrovic Slobodan, Microindentation of Polymethyl Methacrylate (PMMA) Based Bone Cement, null (ISSN 0354-8996) TI_2011_4_146.pdf
|
11. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Continuous control as alternative route for wear monitoring by measuring penetration depth during linear reciprocating sliding of Ti6Al4V alloy, null, 10.1016/j.jallcom.2011.02.158 (ISSN 09258388) 1-s2.0-S092583881100538X-main.pdf
|
12. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Favaro Gregory, Caunii Mihaela, Effect of vacuum-treatment on deformation properties of PMMA bone cement, null, 10.1016/j.jmbbm.2011.08.015 1-s2.0-S1751616111002207-main.pdf
|
13. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Hard Cr Coatings for Cold Forming, null (ISSN 0354-8996) 2.5.pdf
|
14. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null (ISSN 1310-4772) 2.3.pdf
|
15. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Favaro G., A Comparison of Reciprocating Sliding at Low Loads and Scratch Testing for Evaluation of TiN (PVD) Coating, null (ISSN 1310-4772) 2.1.pdf
|
16. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Todorovic Petar, Favaro G., Pantić Marko, Influence Of The Surface Roughness On Adhesion Of Chrome Coatings On Alloy Tool Steel X165CRMOV12, null 2.4.pdf
|
17. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Erić Milan, Dzunic Dragan, Pantić Marko, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null (ISSN 1310-4772) 2.3.pdf
|
18. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding, null, 10.1016/j.wear.2013.01.109 (ISSN 0043-1648)
|
19. Vencl Aleksandar, Rajkovic V., Zivic Fatima, Mitrovic Slobodan, Cvijović-Alagić Ivana, Jovanovic M., The effect of processing techniques on microstructural and tribological properties of copper-based alloys, null, 10.1016/j.apsusc.2013.05.039 (ISSN 0169-4332)
|
20. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction Coefficient of UHMWPE During Dry Reciprocating Sliding, null (ISSN 0354-8996) 2.18.pdf
|
21. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions, null, 10.1016/j.apsusc.2013.11.050 (ISSN 0169-4332)
|
22. Adamovic Dragan, Stefanovic Milentije, Zivkovic Miroslav, Mitrovic Slobodan, Živković Jelena, Zivic Fatima, Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing, null (ISSN 0354-8996) 2.21.pdf
|
23. Grujovic Nenad, Pavlović A., Šljivić Milan, Zivic Fatima, Cost optimization of additive manufacturing in wood industry, null, 10.5937/fmet1604386G (ISSN 1451-2092) 10.5937-fmet1604386G.pdf
|
24. Matovic Branko, Zivic Fatima, Mitrovic Slobodan, Pršić Dragan, Maksimovic Vesna, Volkov Husovic Tatjana, Kumar Ravi, Ultra-high pressure densification and properties of nanostructured SiC, null, 10.1016/j.matlet.2015.09.043 (ISSN 0167-577X)
|
25. Zivic Fatima, Grujovic Nenad, Mitrović Slobodan, Adamovic Dragan, Radovanovic A., Palic Nikola, Friction and Adhesion in Porous Biomaterial Structure, null (ISSN 0354-8996) 2.28.pdf
|
26. Živković Jelena, Adamovic Dragan, Zivkovic Miroslav, Stefanovic Milentije, Mitrovic Slobodan, Zivic Fatima, Electronic databases for materials selection, null (ISSN 1584-2665) ANNALS 2016.pdf
|
27. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Jevremović Darko, Dry Sliding Wear Behavior of PVD TiN Coatings for Cold Forming Tools, null (ISSN 1310-4772) JBTA Vol.22, No.1 2016.pdf
|
28. Grujovic Nenad, Zivic Fatima, Zivkovic Miroslav, Šljivić Milan, Radovanovic A., Bukvic L., Mladenović M., Sindjelic A., Custom design of furniture elements by fused filament fabrication, null, 10.1177/0954406216646401 (ISSN 0954-4062)
|
29. Grujovic Nenad, Zivic Fatima, Schnabelrauch M., Walter T., Wyrwa R., Palić N., Ocokoljić L., Customization of electrospinning for tissue engineering, null, 10.22190/FUME180823032G (ISSN 0354-2025) 10.22190-FUME180823032G.pdf
|
30. Sharma Varun, Zivic Fatima, Grujovic Nenad, Jovanović Živana, COMPUTER AIDED GEOMETRIC DESIGN IN MODELLING OF 3D TEXTILE COMPOSITES, null, 10.24874/PES01.01.018 (ISSN 2620-2832)
|
31. Sharma Varun, Grujovic Nenad, Zivic Fatima, Slavkovic V., Influence of porosity on the mechanical behavior during uniaxial compressive testing on Voronoi-based open-cell aluminium foam, null, 10.3390/ma12071041 10.3390-ma12071041.pdf
|
32. Jovanović Živana, Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Mitrovic Slobodan, REVIEW OF EXISTING CLINICAL SOLUTIONS FOR ARTIFICIAL JOINTS, null, 10.24874/PES01.01.092 (ISSN 2620-2832)
|
33. Palić N., Slavkovic V., Jovanovic Zorica, Zivic Fatima, Grujovic Nenad, Mechanical behaviour of small load bearing structures fabricated by 3d printing, null, 10.18485/aeletters.2019.4.3.2 (ISSN 2466-4677) 10.18485-aeletters.2019.4.3.2.pdf
|
34. Slavkovic Vukasin, Palic Nikola, Sharma Varun, Grujovic Nenad, Zivic Fatima, MORI-TANAKA METHOD IN CHARACTERISATION OF COMPOSITE STRUCTURES, null, 10.24874/PES01.01.011 (ISSN 2620-2832)
|
35. Sharma Varun, Zivic Fatima, Grujovic Nenad, Babcsan N., Babcsán J., Numerical modeling and experimental behavior of closed-cell aluminum foam fabricated by the gas blowing method under compressive loading, null, 10.3390/ma12101582 10.3390-ma12101582.pdf
|
36. Stojković Dragan, Zivic Fatima, Štimac Milko, Borisavljević Katarina, Grujovic Nenad, Raspberry as a potential commodity exchange material in the Republic of Serbia, null, 10.5937/ekoPolj2003955S (ISSN 0352-3462) 0352-34622003955S.pdf
|
37. Busarac Nina, Jovanovic Zorica, Nježić Z., Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Experimental study and analytical model of shear thinning in 3d bioprinting of gelatin, null, 10.24874/ti.964.09.20.09 (ISSN 0354-8996) 10.24874-ti.964.09.20.09.pdf
|
38. Milenković Strahinja, Slavkovic Vukasin, Fragassa Cristiano, Grujovic Nenad, Palic Nikola, Zivic Fatima, Effect of the Raster Orientation on Strength of the Continuous Fiber Reinforced PVDF/PLA Composites, Fabricated by Hand-Layup and Fused Deposition Modeling, null, 10.1016/j.compstruct.2021.114063 (ISSN 0263-8223) 207_Effect of Raster Orientation - journal manuscript-ver2.pdf
|
39. Zivic Fatima, Grujovic N., Mitrovic Slobodan, Tanaskovic Jovan, Todorovic Petar, Influence of the ringer's solution on wear of vacuum mixed poly(Methyl methacrylate) bone cement in reciprocating sliding contact with aisi 316l stainless steel, null, 10.2298/HEMIND210105011Z (ISSN 0367-598X) 10.2298-HEMIND210105011Z.pdf
|
40. Zivic Fatima, Mitrovic Slobodan, Grujovic Nenad, Jovanović Živana, Dzunic Dragan, Milenković Strahinja, The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding, null, 10.3103/S1068366621020124 (ISSN 1068-3666)
|
41. Zivic Fatima, Mitrovic Slobodan, Grujovic Nenad, Jovanović Živana, Dzunic Dragan, Milenković Strahinja, The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding, null, https://doi.org/10.3103/S1068366621020124 (ISSN 1068-3666) The Influence of the 3D Printing Infill and Printing Direction.pdf
|
42. Zivic Fatima, Adamovic Dragan, Mitrovic Slobodan, Grujovic Nenad, Tanaskovic Jovan, Stojadinovic I., Influence of different environments on the sliding friction of Ultra-high-molecular-weight polyethylene (UHMWPE), null, 10.1177/13506501211053100 (ISSN 1350-6501)
|
43. Nježić Z., Radulović Jasna, Zivic Fatima, Miric A., Jovanović Pešić Ž., Vaskovic Jovanovic Mina, Grujovic Nenad, Chaotic Model of Brownian Motion in Relation to Drug Delivery Systems Using Ferromagnetic Particles, null, 10.3390/math10244791 (ISSN -)
|
44. Rakanović M., Bilić Andrijana, Savanović Maria, Armaković Stevan, Pelemiš V., Zivic Fatima, Sladojević M., Armaković Sanja, Zeolites as Adsorbents and Photocatalysts for Removal of Dyes from the Aqueous Environment, null, 10.3390/molecules27196582 (ISSN -)
|
45. Sharma Varun, Zivic Fatima, Adamovic Dragan, Ljusic P., Kotorcevic N., Slavkovic Vukasin, Grujovic Nenad, Multi-Criteria Decision Making Methods for Selection of Lightweight Material for Railway Vehicles, null, 10.3390/ma16010368 (ISSN -)
|
46. Slavkovic V., Palic Nikola, Milenković Strahinja, Zivic Fatima, Grujovic Nenad, Thermo-Mechanical Characterization of 4D-Printed Biodegradable Shape-Memory Scaffolds Using Four-Axis 3D-Printing System, null, 10.3390/ma16145186 (ISSN 1996-1944) materials-16-05186.pdf
|
47. Njezic Sasa, Zivic Fatima, Savić Slobodan, Petrovic Nenad, Jovanović Živana, Stefanovic Anja, Milenković Strahinja, Grujovic Nenad, Analytical model of friction at low shear rates for soft materials in 3D printing, null, 10.3233/THC-240209 (ISSN 0928-7329) THC-240209_R1-3.pdf
|
| |
book
|
1. Dopazo J., Zivic Fatima, Supporting university ventures in nanotechnology, biomaterials and magnetic sensing applications: Policies, practices, and future, null, 10.1007/978-3-319-61237-9
|
2. Zivic Fatima, Vasiljevic Bogdan, Milenković Strahinja, Izabrana poglavlja iz metrologije: Praktikum za laboratorijske vežbe, null MKK-praktikum-final.pdf
|
3. Zivic Fatima, Vasiljevic Bogdan, Milenković Strahinja, Izabrana poglavlja iz metrologije: Praktikum za laboratorijske vežbe, null MKK-praktikum.pdf
|
| |
bookPart
|
1. Pellicer Eva, Nikolic Dejan, Sort J., Baro Maria Dolors, Zivic Fatima, Grujovic Nenad, Grujić R., Pelemiš V., Erratum: Advances in applications of industrial biomaterials [Advances in Applications of Industrial Biomaterials (2017)] DOI: 10.1007/978-3-319-62767-0, null, 10.1007/978-3-319-62767-0_12 10.1007-978-3-319-62767-0_12.pdf
|
2. Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Divac D., Development of new composites made of waste materials for wood pallet element, null, 10.1007/978-3-319-62767-0_11
|
3. Zivic Fatima, Grujovic Nenad, Pellicer Eva, Sort J., Mitrovic Slobodan, Adamovic Dragan, Vulovič M., Biodegradable metals as biomaterials for clinical practice: Iron-based materials, null, 10.1007/978-3-319-68025-5_9
|
4. Adamovic Dragan, Ristic Branko, Zivic Fatima, Review of existing biomaterials-method of material selection for specific applications in orthopedics, null, 10.1007/978-3-319-68025-5_3
|
5. Zivic Fatima, Grujovic Nenad, Miljojkovic Jasmina, Differences between adopters and non-adopters of innovation: Case study of new technologies|adoption by small and medium enterprises in Serbia, null, 10.1007/978-3-319-61237-9_6
|
6. Zivic Fatima, Grujovic Nenad, Mitrovic Slobodan, AHAD INAM UL, Brabazon Dermot, Characteristics and applications of silver nanoparticles, null, 10.1007/978-3-319-56979-6_10
|
7. Adamovic Dragan, Zivic Fatima, Hardness and Non-Destructive Testing (NDT) of Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00074-4 (ISSN -)
|
8. Adamovic Dragan, Zivic Fatima, Static Mechanical Characterization of Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00069-0 (ISSN -)
|
9. Zivic Fatima, Busarac Nina, Milenković Strahinja, Grujovic Nenad, General Overview and Applications of Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00056-2 General Overview and Applications of Ceramic Matrix Composites.pdf
|
10. Zivic Fatima, Palic Nikola, Jovanović Živana, Grujovic Nenad, Processing Routes for Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00059-8 (ISSN -)
|
11. Zivic Fatima, Ceramics Matrix Composites: An Introduction, null, 10.1016/B978-0-12-819724-0.00094-X (ISSN -)
|
| |
review
|
1. Milenković Strahinja, Zivic Fatima, Jovanović Živana, Radovanovic Andreja, Ljusic Petar, Grujovic Nenad, Review of friction stir processing (Fsp) parameters and materials for surface composites, null, 10.24874/ti.1169.06.21.08 (ISSN 0354-8996) 10.24874-ti.1169.06.21.08.pdf
|
2. Branković Marija, Zivic Fatima, Grujovic Nenad, Stojadinovic Ivan, Milenković Strahinja, Kotorčević Nikola, Review of Spider Silk Applications in Biomedical and Tissue Engineering, null, 10.3390/biomimetics9030169 (ISSN 2313-7673) biomimetics-09-00169.pdf
|
| |
conferenceObject
|
1. Babic Miroslav, Mitrovic Slobodan, Zivic Fatima, Increase of life cycle due to application of welding as a surface coating method, null Coatings 1999.pdf
|
2. Mitrovic Slobodan, Zivic Fatima, Increase of life cycle due to application of surface coating method, null TED 2000.pdf
|
3. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Nanotribološka ispitivanja kompozita sa osnovom od ZA-27 legure ojačane česticama Al2O3, null PM_2008mitrovic.pdf
|
4. Zivic Fatima, Mitrovic Slobodan, Babic Miroslav, Uloga nanotribometrije u savremenim tribološkim ispitivanjima, null PM_2008zivic.pdf
|
5. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Nanotribometer instrument as a tool for investigations in nanotribology, null Balkantrib 08_BT-080.pdf
|
6. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Nanotribology investigations of composites based on za-27 alloy reinforced by Al2O3 particles, null Balkantib 08_BT-079.pdf
|
7. Zivic Fatima, Mitrovic Slobodan, Babic Miroslav, Cvijović-Alagić Ivana, Application of Tribometry in Investigations of Biomaterials, null Serbiatrib 09_301-306.pdf
|
8. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, null Serbiatrib 11_168-173.pdf
|
9. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Favaro G., Pantić Marko, Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165CRMOV12, null COATINGS_2011_389-396.pdf
|
10. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, null Serbiatrib 11_174-179.pdf
|
11. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null Balkantrib 2011_59-67.pdf
|
12. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Grujovic Nenad, Tribology in Biomaterials Design and Selection, null Serbiatrib 11_157-167.pdf
|
13. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null Balkantrib 2011_69-76.pdf
|
14. Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Dzunic Dragan, Zivic Fatima, The effect of shot peening on tribological behavior of alloyed steels, null shotpeener.pdf
|
15. Vencl Aleksandar, Arostegui S., Favaro G., Zivic Fatima, Mrdak M., Mitrovic Slobodan, Popović V., Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections, null, 10.1016/j.triboint.2011.04.002 (ISSN 0301-679X)
|
16. Zivic Fatima, Babic Miroslav, Caunii Mihaela, Grujovic Nenad, Mitrovic Slobodan, Favaro G., Microindentation of Polymethyl Methacrylate (PmMa) Based Bone Cement, null Serbiatrb 11_336-341.pdf
|
17. Erić Milan, Mitrovic Slobodan, Zivic Fatima, Pantić Marko, Application of Contemporary Information Technologies in Nanotribometry, null Serbiatrib 11_392-396.pdf
|
18. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Cr Hard Coatings for Cold Forming Tools Under Dry Sliding Conditions, null PM 34_519-522.pdf
|
19. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS, null Bultrib 12-155 .pdf
|
20. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Zivic Fatima, Topalović Marko, Analysis of tribological process during ironing of sheet metal made of AlMg3, null SERBIATRIB 2013 - 265-269.pdf
|
21. Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear behaviour of composites based on ZA27 alloy reinforced with graphite particles, null Serbiatrib13 124-128.pdf
|
22. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Pelemis Svetlana, Friction coefficient of UHMWPE during dry reciprocating sliding, null Serbiatrib13 087-091.pdf
|
23. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction coefficient during reciprocating sliding of UHMWPE in ringer's solution, null Polycomtrib2013.pdf
|
24. Zivic Fatima, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Petrovic Vojislav, Bukvic L., Radovanović Andreja, Influence of the biomaterial porosity on the host tissue response, the friction and adhesion, null Serbiatrib15 475-484.pdf
|
25. Živković Jelena, Adamovic Dragan, Zivkovic Miroslav, Stefanovic Milentije, Mitrovic Slobodan, Zivic Fatima, Electronic Databases for Materials Selection, null Demi2015 569-576.pdf
|
26. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Dzunic Dragan, Zivic Fatima, Adamovic Dragan, AFM surface roughness and topography analysis of lithium disilicate glass ceramic, null Serbiatrib15 514-521.pdf
|
27. Adamovic Dragan, Stefanovic Milentije, Zivkovic Miroslav, Mitrovic Slobodan, Živković Jelena, Zivic Fatima, Influence of lubricant type on the surface quality of aluminium parts obtained by ironing, null Serbiatrib15 397-406.pdf
|
28. LEKOVIC Katarina, Sharma Varun, Grujovic Nenad, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, HIGH FRICTION COEFFICIENT MATERIALS, null serbiatrib 17-128.pdf
|
29. Palic Nikola, Sharma Varun, Grujovic Nenad, Mitrovic Slobodan, Zivic Fatima, FRICTION FACTOR OF THE FLUID FLOW THROUGH POROUS MEDIA, null serbiatrib 17-42.pdf
|
30. Palic Nikola, Sharma Varun, Zivic Fatima, Mitrovic Slobodan, Grujovic Nenad, TRIBOLOGY STUDY OF ALUMINUM-BASED FOAM, null MMA2018.pdf
|
31. Adamovic Dragan, Živković Jelena, Nedic Bogdan, Zivic Fatima, Mitrovic Slobodan, Zivkovic Miroslav, ANALYSIS OF THE PROCESS PARAMETERS INFLUENCE ON THE CHANGE OF MEAN CONTACT PRESSURE IN IRONING PROCESS, null, 10.24874/PES01.01.063 (ISSN 2620-2832)
|
32. Zivic Fatima, Adamovic Dragan, Mitrovic Slobodan, Grujovic Nenad, Tanaskovic Jovan, Busarac Nina, Stojadinović Ivan, Friction coefficient during the reciprocating sliding of UHMWPE in different environments, null Balkantib 20-2.pdf
|
33. Anic Milos, Prodanovic Momcilo, Milenković Strahinja, Filipović Nenad, Grujovic Nenad, Zivic Fatima, Electrospinning As The Fabrication Technology For The Energy Harvesting Composites, null ELECTROSPINNING AS THE FABRICATION TECHNOLOGY FOR THE ENERGY HARVESTING COMPOSITES.pdf
|
34. Milanović Ljubica, Milenković Strahinja, Petrovic Nenad, Grujovic Nenad, Slavkovic Vukasin, Zivic Fatima, Optical Coherence Tomography (OCT) Imaging Technology, null, 10.1109/BIBE52308.2021.9635099 Optical Coherence Tomography (OCT) Imaging Technology.pdf
|
35. Anic Milos, Prodanovic Momcilo, Milenković Strahinja, Filipovic Nenad, Grujovic Nenad, Zivic Fatima, The Review of Materials for Energy Harvesting, null, 10.1109/BIBE52308.2021.9635169 The Review of Materials for Energy Harvesting.pdf
|
36. Jovanović Živana, Dzunic Dragan, Milenković Strahinja, Palic Nikola, Nježić Saša, Slavkovic Vukasin, Zivic Fatima, Fabrication of Aluminum Matrix Composites for Automotive Industry via Friction Stir Processing Technique – A Review, null FABRICATION OF ALUMINUM MATRIX COMPOSITES FOR AUTOMOTIVE INDUSTRY VIA FRICTION STIR PROCESSING TECHNIQUE – A REVIEW.pdf
|
37. Mitrevski N., Ilić Đ, Marković Jelena, Sustersic Tijana, Zivic Fatima, Grujovic Nenad, Filipovic Nenad, SMART2M Digital Platform as the Communication Channel for Academia - Industry Collaboration, null
|
38. Marković Jelena, Ilić Đ, Mitrevski N., Sustersic Tijana, Zivic Fatima, Filipovic Nenad, Digital Platform as the Communication Channel for Challenges in Artificial Intelligence, null
|
39. Busarac Nina, Kotorčević Nikola, Mitrovic Slobodan, Adamovic Dragan, Todorovic Petar, Grujovic Nenad, Zivic Fatima, APPLICATION OF THE FRACTAL GEOMETRY IN WEAR VOLUME CALCULATIONS AT MICRO SCALE, null 1.SERBIATRIB.23.pdf
|
40. Pajić Nemanja, Aleksić Jovana, Zivic Fatima, Djordjevic Aleksandar, AI APPLICATION IN QUALITY ASSURANCE OF INDUSTRIAL LASER WELDING PROCESSES, null 50.pdf
|
41. Milenković Strahinja, Jovanović Pešić Ž., Palic Nikola, Slavkovic V., Grujovic Nenad, Zivic Fatima, INFLUENCE OF THE NOZZLE WEAR ON 3D PRINTING QUALITY, null INFLUENCE OF THE NOZZLE WEAR ON 3D PRINTING QUALITY.pdf
|
| |
contributionToPeriodical
|
1. Zivic Fatima, Affatato Saverio, Trajanovic Miroslav, Schnabelrauch M., Grujovic Nenad, Choy Kwang-Leong, Biomaterials in Clinical Practice, null, 10.1007/978-3-319-68025-5
|
2. Zivic Fatima, Grujovic Nenad, AHAD INAM UL, Brabazon Dermot, Introduction-The current status and momentum in nanotechnology commercialisation, null, 10.1007/978-3-319-56979-6_1
|
3. Dopazo J., Zivic Fatima, Erratum to: Supporting university ventures in nanotechnology, biomaterials and magnetic sensing applications, null, 10.1007/978-3-319-61237-9_12
|
4. Pellicer Eva, Nikolic Dejan, Sort J., Baro Maria Dolors, Zivic Fatima, Grujovic Nenad, Grujić R., Pelemiš V., Preface, null, 10.1007/978-3-319-62767-0
|
5. Brabazon Dermot, Pellicer Eva, Zivic Fatima, Sort J., Baro Maria Dolors, Grujovic Nenad, Choy Kwang-Leong, Commercialization of Nanotechnologies–A Case Study Approach, null, 10.1007/978-3-319-56979-6
|
