| |
article
|
1. Babic Milun, Bojic Milorad, Jeremić Branislav, Babic Miroslav, Milovanovic Dobrica, Jovicic Nebojsa, Despotovic Milan, Gordić Dušan, Aktivnost regionalnog centra za racionalno gazdovanje energijom, null (ISSN 0354-8651) Energija1999_0001.pdf
|
2. Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, Tribological Properties of Composites with Substrate Made of the ZA-27 Alloy Reinforced by the Graphite Particles, null (ISSN 0354-8996) TI_2007_3-8.pdf
|
3. Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, ZA-27 Alloy Composites Reinforced with Al2O3 Particles, null (ISSN 0354-8996) TI_2007_35-42.pdf
|
4. Babic Miroslav, Ninkovic Rato, Mitrovic Slobodan, Bobic Ilija, Influence of Heat Treatment on Tribological Behavior of Zn-Al Alloys, null (ISSN 0354-8996) TI_2007_23-31.pdf
|
5. Vencl Aleksandar, Bobic Ilija, Jovanovic Milan, Babic Miroslav, Mitrović Slobodan, Microstructural and Tribological Properties of A356 Al–Si Alloy Reinforced with Al2O3 Particles, null, 10.1007/s11249-008-9374-6 (ISSN 1023-8883) s11249-008-9374-6.pdf
|
6. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles, null (ISSN 0354-8996) TI_2008_33-39.pdf
|
7. Bobic Ilija, Babic Miroslav, Mitrovic Slobodan, Bobic Biljana, Jovanovic Milan, Rheological behavior of ZA27 alloy semi-solid slurries and Al2O3 particulate / ZA27 composite slurries, null (ISSN 0354-8996) TI_2008_47-54.pdf
|
8. Bobic Biljana, Babic Miroslav, Mitrovic Slobodan, Jovanovic Milan, Bobic Ilija, Comparison of rheological behavior between semisolid mixtures of ZA27 alloy and ZA27-AL2O3 composites, null (ISSN 0354-6306) Metalurgija 2009.pdf
|
9. Babic Miroslav, Vencl Aleksandar, Mitrović Slobodan, Bobic Ilija, Influence of T4 Heat Treatment on Tribological Behavior of Za27 Alloy Under Lubricated Sliding Condition, null, 10.1007/s11249-009-9467-x (ISSN 1023-8883) s11249-009-9467-x.pdf
|
10. Kakaš Damir, Skoric Branko, Babic Miroslav, Mitrovic Slobodan, Miletic Aleksandar, Vilotic Marko, Terek Pal, Kovačević L., Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating, null (ISSN 1451-2092) FME 2009.pdf
|
11. Bobic Biljana, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Corrosion of Aluminium and Zinc-Aluminium Alloys Based Metal-Matrix Composites, null (ISSN 0354-8996) TI_2009_44-52.pdf
|
12. Babic Miroslav, Mitrovic Slobodan, Ninkovic Rato, Tribological Potencial of Zinc-Aluminium Alloys Improvement, null (ISSN 0354-8996) TI_2009_15-28.pdf
|
13. Kakaš Damir, Skoric B., Mitrovic Slobodan, Babic Miroslav, Terek P., Miletic A., Vilotic M., Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN, null (ISSN 0354-8996) TI_31_34_3-10.pdf
|
14. Cvijović-Alagić Ivana, Mitrovic Slobodan, Cvijović Z., Veljovic Djordje, Babic Miroslav, Rakin M., Influence of the Heat Treatment on the Tribological Characteristics of the Ti-based Alloy for Biomedical Applications, null (ISSN 0354-8996) TI_31_34_17-22.pdf
|
15. Branislav Nedeljkovic, Babic Miroslav, Milan Mutavdzic, Ratkovic Nada, Aleksandrovic Srbislav, Nikolic Ruzica, Lazic Vukic, REPARATORY HARD FACING OF THE ROTATIONAL DEVICE KNIVES FOR TERRAIN LEVELLING, null (ISSN 1310-4772) 100-B Nedeljk - J of Balk Trib Ass 2010- 46-57.pdf
|
16. Bobic Biljana, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Corrosion of Metal-Matrix Composites with Aluminium Alloy Substrate, null (ISSN 0354-8996) TI_32_1_3-11.pdf
|
17. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Tribometry of Materials for Bioengineering Applications, null (ISSN 0354-8996) TI_32_1_25-32.pdf
|
18. Adamovic Dragan, Babic Miroslav, Stefanovic Milentije, Aleksandrovic Marko, Golusija Z., Mitrovic Slobodan, Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricant Testing, null (ISSN 1310-4772) 2.8a.pdf
|
19. Babic Miroslav, Mitrovic Slobodan, Dzunic Dragan, Jeremic B., Ilija B., Tribological behavior of composites based on ZA-27 alloy reinforced with graphite particles, null, 10.1007/s11249-009-9535-2 (ISSN 1023-8883)
|
20. Cvijović-Alagić Ivana, Cvijović Z., Mitrovic Slobodan, Rakin M., Veljovic Djordje, Babic Miroslav, Tribological behaviour of orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V alloys, null, 10.1007/s11249-010-9639-8 (ISSN 1023-8883)
|
21. Vencl Aleksandar, Bobic Ilija, Arostegui S., Bobic Biljana, Marinković Aleksandar, Babic Miroslav, Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC+ graphite particles, null, 10.1016/j.jallcom.2010.07.028 (ISSN 0925-8388)
|
22. Bobic Biljana, Babic M., Mitrovic Slobodan, Ilić N., Bobic Ilija, Jovanovic M., Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures, null, 10.3139/146.110425 (ISSN 1862-5282)
|
23. Babic Miroslav, Mitrovic Slobodan, Jeremic B., The influence of heat treatment on the sliding wear behavior of a ZA-27 alloy, null, 10.1016/j.triboint.2009.04.016 (ISSN 0301679X) 1-s2.0-S0301679X09001066-main.pdf
|
24. Zivic Fatima, Babic Miroslav, Cvijović-Alagić Ivana, Mitrovic Slobodan, Vencl Aleksandar, Wear Behaviour of Ti6Al4V Alloy Against Al2O3 Under Linear Reciprocating Sliding, Journal of the Balkan Tribological Association, null (ISSN 1310-4772) 2.14a.pdf
|
25. Bobic Biljana, Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, Jovanovic Milan, Experimental investigation and calculation of shear rate, shear stress and power for mixing of semi-solid mixtures of ZA27 alloy and ZA27/Al2O3 composites with large Al2O3 particles, null (ISSN 0354-6306) Metalurgija_2011.pdf
|
26. Aleksandrovic Srbislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, Babic Miroslav, Nikolic Ruzica, VUJINOVIĆ Tomislav, VARIABLE TRIBOLOGICAL CONDITIONS ON THE FLANGE AND NONMONOTONOUS FORMING IN DEEP DRAWING OF COATED SHEETS, null (ISSN 1310-4772) 112--J of the Balk Trib As-17 -2-165-178 - 2011.pdf
|
27. Babic Miroslav, Mitrovic Slobodan, Zivic Fatima, Effects of Al2O3 particle reinforcement on the lubricated sliding wear behavior of ZA-27 alloy composites, null, 10.1007/s10853-011-5664-8 (ISSN 0022-2461)
|
28. Glišović Jasna, Radonjić Rajko, Babic Miroslav, Miloradović Danijela, Ćatić Dobrivoje, Design of Vehicle Road Testing Method for Determination of Brake Pad Friction Characteristics, null (ISSN 1310-4772) 513-525KONACNO.pdf
|
29. Erić Milan, Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Pantić Marko, Application of Contemporary Information Technologies in Nanotribometry, null (ISSN 1584-2665) TI_2011_4_159-163.pdf
|
30. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Todorovic Petar, Interpretation of the Friction Coefficient During Reciprocating Sliding of Ti6Al4V Alloy Against Al2O3, null (ISSN 0354-8996) TI_2011_1_36-42.pdf
|
31. Babic Biljana, Mitrovic Slobodan, Babic Miroslav, Vencl Aleksandar, Bobic Ilija, Corrosion Behavior of the As-cast and Heat-treated ZA27 Alloy, null (ISSN 0354-8996) TI_2011_2_87-93.pdf
|
32. Zivic Fatima, Babic Miroslav, Favaro G., Caunii Mihaela, Grujovic Nenad, Mitrovic Slobodan, Microindentation of Polymethyl Methacrylate (PMMA) Based Bone Cement, null (ISSN 0354-8996) TI_2011_4_146.pdf
|
33. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Continuous control as alternative route for wear monitoring by measuring penetration depth during linear reciprocating sliding of Ti6Al4V alloy, null, 10.1016/j.jallcom.2011.02.158 (ISSN 09258388) 1-s2.0-S092583881100538X-main.pdf
|
34. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Favaro Gregory, Caunii Mihaela, Effect of vacuum-treatment on deformation properties of PMMA bone cement, null, 10.1016/j.jmbbm.2011.08.015 1-s2.0-S1751616111002207-main.pdf
|
35. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Hard Cr Coatings for Cold Forming, null (ISSN 0354-8996) 2.5.pdf
|
36. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null (ISSN 1310-4772) 2.3.pdf
|
37. Stojanovic Blaza, Babic Miroslav, Marjanovic Nenad, Ivanović Lozica, Ilic Andreja, TRIBOMECHANICAL SYSTEMS IN MECHANICAL POWER TRANSMITTERS, null (ISSN 1310-4772) 10_JBTA_Stojanovic_2012.pdf
|
38. Mitrovic Slobodan, Babic Miroslav, Stojanovic Blaza, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with SiC and Graphite Particles, null (ISSN 0354-8996) 11_TI_Mitrovic_2012.pdf
|
39. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Favaro G., A Comparison of Reciprocating Sliding at Low Loads and Scratch Testing for Evaluation of TiN (PVD) Coating, null (ISSN 1310-4772) 2.1.pdf
|
40. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Todorovic Petar, Favaro G., Pantić Marko, Influence Of The Surface Roughness On Adhesion Of Chrome Coatings On Alloy Tool Steel X165CRMOV12, null 2.4.pdf
|
41. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Erić Milan, Dzunic Dragan, Pantić Marko, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null (ISSN 1310-4772) 2.3.pdf
|
42. Aleksandrovic Srbislav, Babic Miroslav, Branislav Nedeljkovic, VUJINOVIĆ Tomislav, Taranović Dragan, Lazic Vukic, Milosavljevic Dragan, VARIABLE DRAWBEAD HEIGHT AND VARIABLE CONTACT PRESSURE AS TRIBOLOGICAL INFLUENCES IN SHEET METAL STRIPE SLIDING TEST, null (ISSN 1310-4772) J of Balk Trib Asoc 2012 -- 184-194.pdf
|
43. Bobic Ilija, Babic Miroslav, Vencl Aleksandar, Bobic Biljana, Mitrovic Slobodan, Artificial aging of thixocast ZA27 alloy and particulate ZA27/SiC p composites, null, 10.3139/146.110958 (ISSN 1862-5282)
|
44. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding, null, 10.1016/j.wear.2013.01.109 (ISSN 0043-1648)
|
45. Stojanovic Blaza, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Miloradović Nenad, Pantić Marko, Tribological Characteristics of Aluminium Hybrid Composites Reinforced with Silicon Carbide and Graphite, null (ISSN 1310-4772) 2.11.pdf
|
46. Babic Miroslav, Stojanovic Blaza, Mitrovic Slobodan, Bobic Ilija, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions, null (ISSN 0354-8996) 12_TI_Babic_2013.pdf
|
47. Mitrovic Slobodan, Babic Miroslav, Miloradović Nenad, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, Pantić Marko, Wear characteristics of hybrid composites based on Za27 alloy reinforced with silicon carbide and graphite particles, null (ISSN 0354-8996) 20_TI_Mitrovic_2014.pdf
|
48. Erić Milan, Babic Miroslav, Mitrovic Slobodan, Tadić Branko, Dzunic Dragan, Conversion of data into information in tribology research, null (ISSN 1310-4772) 2.15.pdf
|
49. Bobic Ilija, Ruzic Jovana, Bobic Biljana, Babic Miroslav, Vencl Aleksandar, Mitrovic Slobodan, Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles, null, 10.1016/j.msea.2014.06.028 (ISSN 0921-5093)
|
50. Bobic Biljana, Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, The Influence of Corrosion on the Microstructure of Thermally Treated ZA27/SiCp Composites, null (ISSN 0354-8996) 2.16.pdf
|
51. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction Coefficient of UHMWPE During Dry Reciprocating Sliding, null (ISSN 0354-8996) 2.18.pdf
|
52. Pantić Marko, Mitrović Slobodan, Babic Miroslav, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic, null (ISSN 0354-8996) 2.22.pdf
|
53. Stojanovic Blaza, Babic Miroslav, Miloradović Nenad, Mitrovic Slobodan, TRIBOLOGICAL BEHAVIOUR OF A356/10SiC/3Gr HYBRID COMPOSITE IN DRY-SLIDING CONDITIONS, null (ISSN 1580-2949) 23_MiT_Stojanovic_2015.pdf
|
54. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles, null (ISSN 0354-8996) 2.23.pdf
|
55. Stojanovic Blaza, Babic Miroslav, Ivanović Lozica, Taguchi optimization of tribological properties of Al/SiC/graphite composite, null (ISSN 1310-4772) 28_JBTA_Stojanovic_2016.pdf
|
56. Stojanovic Blaza, Babic Miroslav, Velickovic Sandra, Blagojevic J., Tribological Behavior of Aluminum Hybrid Composites Studied by Application of Factorial Techniques, null, 10.1080/10402004.2015.1091535 (ISSN 1040-2004)
|
57. Bobic Ilija, Bobic Biljana, Vencl Aleksandar, Babic Miroslav, Mitrović Slobodan, Corrosion Behavior of Compocasted ZA27/SiCp Composites in Sodium Chloride Solution, null (ISSN 0354-8996) 2.26.pdf
|
58. Stojanovic Blaza, Velickovic Sandra, Vencl Aleksandar, Babic Miroslav, Petrovic Nenad, Miladinovic Slavica, Cherkezova-Zheleva Zara, Optimization and prediction of aluminium composite wear using Taguchi design and artificial neural network, null (ISSN 1313-9878) OPTIMIZATION AND PREDICTION OF ALUMINIUM COMPOSITE WEAR USING TAGUCHI DESIGN AND ARTIFICIAL NEURAL NETWORK.pdf
|
59. Velickovic Sandra, Stojanovic Blaza, Babic Miroslav, Bobic Ilija, Optimization of tribological properties of aluminum hybrid composites using Taguchi design, null, 10.1177/0021998316672294 (ISSN 0021-9983)
|
60. Babic Miroslav, Kočović Vladimir, Vukelic Djordje, Mihajlovic Goran, Erić Milan, Tadic Branko, Investigation of ball burnishing processing on mechanical characteristics of wooden elements, null, 10.1177/0954406216641711 (ISSN 0954-4062)
|
61. Stojanovic Blaza, Blagojevic J., Babic Miroslav, Velickovic Sandra, Miladinović Slavica, Optimization of hybrid aluminum composites wear using Taguchi method and artificial neural network, null, 10.1108/ILT-02-2017-0043 (ISSN 0036-8792)
|
62. Pantić Marko, Dordević A., Erić Milan, Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Stefanovic Miladin, Application of artificial neural network in biotribological research of dental glass ceramic, null, 10.24874/ti.2018.40.04.15 (ISSN 0354-8996) 10.24874-ti.2018.40.04.15.pdf
|
63. Velickovic Sandra, Stojanovic Blaza, Babic Miroslav, Vencl Aleksandar, Bobic Ilija, Bognar Gabriella, Vučetić F., Parametric optimization of the aluminium nanocomposites wear rate, null, 10.1007/s40430-018-1531-8 (ISSN 1678-5878)
|
64. Velickovic Sandra, Stojanovic Blaza, Vencl Aleksandar, Babic Miroslav, Dzunic Dragan, Pantić Marko, Šljivić V., TRIBOLOGICAL BEHAVIOUR OF A356/SIC NANOCOMPOSITE, null, 10.24874/PES01.01.016 (ISSN 2620-2832)
|
65. Pantić Marko, Dzunic Dragan, Babic Miroslav, Mitrovic Slobodan, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić A., NANOINDENTATION OF ZIRCONIUM DENTAL CERAMIC PREPARED WITH DIFFERENT FINISHING TECHNIQUES, null, 10.24874/PES01.01.093 (ISSN 2620-2832)
|
66. Dzunic Dragan, Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić A., ASSESSMENT OF TRIBOLOGICAL BEHAVIOUR OF ZA-27 ZINC-ALUMINIUM ALLOY BASED NANOCOMPOSITE, null, 10.24874/PES01.01.020 (ISSN 2620-2832)
|
67. Babic Miroslav, Stojanovic Blaza, Dzunic Dragan, Pantić Marko, Micro/nanoscale structural, mechanical and tribological characterization of ZA-27/SiC nanocomposites, null, 10.1177/0021998319891766 (ISSN 0021-9983)
|
| |
book
|
1. Babic Miroslav, Mitrovic Slobodan, Tribološke karakteristike kompozita na bazi ZnAl legura, null Kompoziti.pdf
|
2. Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Tribološka karakterizacija nanokompozita sa metalnom osnovom, null Monografija.pdf
|
| |
review
|
1. Stojanovic Blaza, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Miloradović Nenad, Pantić Marko, TRIBOLOGICAL CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE AND GRAPHITE. a review, null (ISSN 1310-4772) 15_JBTA_Stojanovic_2013.pdf
|
| |
conferenceObject
|
1. Babic Miroslav, Mitrovic Slobodan, Zivic Fatima, Increase of life cycle due to application of welding as a surface coating method, null Coatings 1999.pdf
|
2. Babic Miroslav, Ninkovic Rato, Mitrovic Slobodan, Bobic Ilija, Uticaj termičke obrade na tribološko ponašanje Zn-Al legura, null PM_2006_519-526.pdf
|
3. Babic Miroslav, Ninkovic Rato, Mitrovic Slobodan, Bobic Ilija, UTICAJ TERMIČKE OBRADE NA TRIBOLOŠKO PONAŠANJE Zn-Al LEGURA, null PM_2006_519-526.pdf
|
4. Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Tribološke karakteristike kompozita sa osnovom od ZA-27 legure ojačane česticama grafita, null PM_2006_547-553.pdf
|
5. Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, Tribological properties of composites with substrate made of the ZA-27 alloy reinforced by the graphite particles, null Serbiatrib 07_173-178.pdf
|
6. Babic Miroslav, Ninkovic Rato, Mitrovic Slobodan, Bobic Ilija, Influence of Heat treatment on Tribological Behavior of Zn-Al Alloys, null Serbiatrib 07_045-054.pdf
|
7. Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, ZA-27 Alloy Composites Reinforced with Al2O3 Particles, null Serbiatrib 07_063-069.pdf
|
8. Bobic Ilija, Babic Miroslav, Mitrovic Slobodan, Bobic Biljana, Jovanovic M.T., Rheological behavior of za27 alloy semi-solid slurries and Al2O3 particulate / ZA27 composite slurries, null ICMEN 2008_363-372.pdf
|
9. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Nanotribološka ispitivanja kompozita sa osnovom od ZA-27 legure ojačane česticama Al2O3, null PM_2008mitrovic.pdf
|
10. Zivic Fatima, Mitrovic Slobodan, Babic Miroslav, Uloga nanotribometrije u savremenim tribološkim ispitivanjima, null PM_2008zivic.pdf
|
11. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Nanotribometer instrument as a tool for investigations in nanotribology, null Balkantrib 08_BT-080.pdf
|
12. Babic Miroslav, Mitrovic Slobodan, Comparative tribological behaviours of hard and self-lubricating coatings deposited on heat treated steels, null Coatings 2008_449-458.pdf
|
13. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Nanotribology investigations of composites based on za-27 alloy reinforced by Al2O3 particles, null Balkantib 08_BT-079.pdf
|
14. Babic Miroslav, Adamovic Dragan, Jeremic B., Mitrovic Slobodan, Tribological effects of shot peening surface treatment, null 2008_ICMEN_657-664.pdf
|
15. Zivic Fatima, Mitrovic Slobodan, Babic Miroslav, Cvijović-Alagić Ivana, Application of Tribometry in Investigations of Biomaterials, null Serbiatrib 09_301-306.pdf
|
16. Kakas D., Skoric B., Babic Miroslav, Mitrovic Slobodan, Miletic A., Vilotic M., Terek P., Kovačević L., Surface Roughness and Friction Coefficient at IBAD Deposited Tin Hard Coating, null Serbiatrib 09_145-148.pdf
|
17. Babic Miroslav, Mitrovic Slobodan, Ninkovic Rato, Tribological Potencial of Zinc-Aluminium Alloys Improvement, null Serbiatrib 09_037-050.pdf
|
18. Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, Ninkovic Rato, Influence of Heat Treatment on Tribological Properties of ZA-27 Alloy, null WTC 2009.pdf
|
19. Babic Miroslav, Matijević Milan, Stefanovic Miladin, Gordić Dušan, Blagojevic Mirko, Cvjetković Vladimir, ICT tehnologije u funkciji podizanja efikasnosti bolonjskog procesa, null Zbornik Trend 2010.pdf
|
20. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, null Serbiatrib 11_168-173.pdf
|
21. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Favaro G., Pantić Marko, Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165CRMOV12, null COATINGS_2011_389-396.pdf
|
22. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, null Serbiatrib 11_174-179.pdf
|
23. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null Balkantrib 2011_59-67.pdf
|
24. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Grujovic Nenad, Tribology in Biomaterials Design and Selection, null Serbiatrib 11_157-167.pdf
|
25. Kakaš Damir, Škoric B., Terek P., Kovačević L., Miletic A., Vilotic M., Mitrovic Slobodan, Babic M., Influence of Sliding Speed and Surface Roughness on the Friction Coefficient and Wear of TiN Coatings Deposited at Low Temperature, null Serbiatrib 11_131-137.pdf
|
26. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null Balkantrib 2011_69-76.pdf
|
27. Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Dzunic Dragan, Zivic Fatima, The effect of shot peening on tribological behavior of alloyed steels, null shotpeener.pdf
|
28. Bobic Biljana, Vencl Aleksandar, Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, Kompoziti sa dobrom otpornošću na habanje dobijeni infiltracijom čestica silicijum-karbida (SiC) i čestica grafita u osnovu od aluminijumske legure А356, null Pronalazastvo_2011.jpg.pdf
|
29. Zivic Fatima, Babic Miroslav, Caunii Mihaela, Grujovic Nenad, Mitrovic Slobodan, Favaro G., Microindentation of Polymethyl Methacrylate (PmMa) Based Bone Cement, null Serbiatrb 11_336-341.pdf
|
30. Bobic Ilija, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Bobic Biljana, Uticaj Temperature na Mehaničke Karakteristike Čestičnih Za27/Al2O3 Kompozita, null Serbiatrib 11_412-417.pdf
|
31. Bobic Biljana, Mitrovic Slobodan, Babic Miroslav, Vencl Aleksandar, Bobic Ilija, Corrosion Behaviour of the As-Cast and Heat-Treated Za27 Alloy, null Serbiatrib11_091-097.pdf
|
32. Mitrovic Slobodan, Babic Miroslav, Stojanovic Blaza, Miloradović Nenad, Tribological Potencial of Hybrid Composites Based on Zinc ond Aluminium Alloys Reinforced with SiC and Graphite Particles, null serbiatrib 11_138-145.pdf
|
33. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Cr Hard Coatings for Cold Forming Tools Under Dry Sliding Conditions, null PM 34_519-522.pdf
|
34. Babic Miroslav, Stojanovic Blaza, Mitrovic Slobodan, Bobic Ilija, Miloradović Nenad, Pantić Marko, THE INFLUENCE OF LUBRICANT ON FRICTION COEFFICIENT OF HYBRID AL-SIC-GR COMPOSITES, null Bultrib 12-148.pdf
|
35. Mitrovic Slobodan, Miloradović Nenad, Babic Miroslav, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, WEAR BEHAVIOUR OF HYBRID ZA27/SIC/GRAPHITE COMPOSITES UNDER DRY SLIDING CONDITIONS, null Bultrib 12-142.pdf
|
36. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS, null Bultrib 12-155 .pdf
|
37. Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear behaviour of composites based on ZA27 alloy reinforced with graphite particles, null Serbiatrib13 124-128.pdf
|
38. Bobic Ilija, Biljana Bobic, Babic Miroslav, Vencl Aleksandar, Mitrovic Slobodan, Razvoj tehnologije dobijanja domaćih čestičnih hibridnih kompozita A356/SiC+grafit sa osnovom od aluminijumske legure, null Pronalazastvo_2013.pdf
|
39. Bobic Ilija, Bobic Biljana, Babic Miroslav, Vencl Aleksandar, Mitrovic Slobodan, Development of domestic hybrid composites A356/SiCp/Grp with large graphite particles., null Development of domestic hybrid composites -2013.pdf
|
40. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Pelemis Svetlana, Friction coefficient of UHMWPE during dry reciprocating sliding, null Serbiatrib13 087-091.pdf
|
41. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction coefficient during reciprocating sliding of UHMWPE in ringer's solution, null Polycomtrib2013.pdf
|
42. Bobic Ilija, Babic Miroslav, Vencl Aleksandar, Mitrovic Slobodan, Bobic Biljana, Veštačko starenje tiksolivene ZA27 legure i čestičnih ZA27/SiC kompozita, null Serbiatrib13 409-413.pdf
|
43. Babic Miroslav, Stojanovic Blaza, Mitrovic Slobodan, Bobic Ilija, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Wear properties of A356/10SiC/1Gr hybrid composites in lubricated sliding conditions, null Serbiatrib13 129-134.pdf
|
44. Bobic Biljana, Vencl Aleksandar, Babic Miroslav, Mitrovic Slobodan, Bobic Ilija, The influence of corrosion on the microstructure of thermally treated ZA27/SICP composites, null Serbiatrib13 106-112.pdf
|
45. Mitrovic Slobodan, Babic Miroslav, Miloradović Nenad, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, Wear characteristics of hybrid composites based on ZA27 alloy reinforced with silicon carbide and graphite particles, null Serbiatrib13 141-146.pdf
|
46. Stojanovic Blaza, Babic Miroslav, Optimization of A356/10SiC/3Gr Hybrid Composite Wear Using Taguchi Method, null Stojanovic_Balkantrib14_Taguchi.pdf
|
47. Babic Miroslav, Mitrovic Slobodan, Stojanovic Blaza, Miloradović Nenad, Tribological potential of particulate composites with ZA-27 alloy matrix, null Balkantrib14.pdf
|
48. Stojanovic Blaza, Babic Miroslav, Velickovic Sandra, Blagojević Jasmina, Optimization of wear behaviour in aluminium hybrid composites using Taguchi method, null Optimization of wear behaviour in aluminium hybrid composites using Taguchi method.pdf
|
49. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Dzunic Dragan, Zivic Fatima, Adamovic Dragan, AFM surface roughness and topography analysis of lithium disilicate glass ceramic, null Serbiatrib15 514-521.pdf
|
50. Bobic Biljana, Bobic Ilija, Vencl Aleksandar, Babic M., Mitrović Slobodan, Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution, null Serbiatrib15 067-072.pdf
|
51. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nedeljković B., Nanoindentation of ZA27 alloy based nanocomposites reinforced with Al2O3 particles, null Serbiatrib15 073-080.pdf
|
52. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Pantić Marko, Bobic Ilija, TRIBOLOGICAL BEHAVIOR OF ZA-27 ALLOY BASED NANOCOMPOSITE REINFORCED WITH SiC NANOPARTICLES, null Bultrib 2018-2.pdf
|
53. Miladinovic Slavica, Rankovic Vesna, Babic Miroslav, Stojanovic Blaza, Velickovic Sandra, PREDICTION OF TRIBOLOGICAL BEHAVIOR OF ALUMINIUM MATRIX HYBRID COMPOSITES USING ARTIFICIAL NEURAL NETWORKS, null PREDICTION OF TRIBOLOGICAL BEHAVIOR OF ALUMINIUM MATRIX HYBRID COMPOSITES USING ARTIFICIAL NEURAL NETWORKS.pdf
|
54. Miladinovic Slavica, Rankovic Vesna, Babic Miroslav, Stojanovic Blaza, Velickovic Sandra, Prediction of tribological behavior of aluminium matrix hybrid composites using artificial neural networks, null PREDICTION OF TRIBOLOGICAL BEHAVIOR OF ALUMINIUM MATRIX.pdf
|
55. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, MICRO SCRATCH BEHAVIOUR OF LITHIUM DISILICATE GLASS CERAMIC AFTER GLAZING TREATMENT, null serbiatrib 17-645.pdf
|
56. Stojanovic Blaza, Velickovic Sandra, Babic Miroslav, Bobic Ilija, Optimization of tribological properties in A356/10SiC/5Gr hybrid composite using Taguchi method, null OPTIMIZATION OF TRIBOLOGICAL PROPERTIES IN A356_10SiC_5Gr.pdf
|
57. Dzunic Dragan, Babic Miroslav, Mitrovic Slobodan, Pantić Marko, Bobic Ilija, MICRO SCRATCH TEST CHARACTERISATION OF ZA-27/SiC NANOCOMPOSITES, null serbiatrib 17-75.pdf
|
58. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Jevremovic Danimir, Jevremović Ana, Kanjevac Tatjana, IN VIVO STUDY OF THE NANOMECHANICAL PROPERTIES OF LEUCITE GLASS CERAMIC PREPARED WITH DIFFERENT SURFACE FINISHING PROCEDURES, null ETIKUM_2017_SM.pdf
|
59. Pantić Marko, Babic Miroslav, Mitrovic Slobodan, Jevremović Darko, Dzunic Dragan, Kanjevac Tatjana, Luković Ivana, EFFECTS OF DIFFERENT FINISHING PROCEDURE ONTO NANOMECHANICAL CHARACTERISTICS OF VENEERING CERAMIC, null Bultrib 2018-1.pdf
|
60. Dzunic Dragan, Mitrovic Slobodan, Pantić Marko, Babic Miroslav, PRIMENA „MICRO SCRATCH TESTER“-a ZA KARAKTERIZACIJU ZA-27 NANOKOMPOZITA OJAČANIH Al2O3 NANOČESTICAMA, null eKonferencije.pdf
|
| |
workingPaper
|
1. Bobic Ilija, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Bobic Biljana, Tadic Branko, Keramički lonac elektrooptorne peći za izvođenje kompokasting postupka, null 80.a3.pdf
|
2. Bobic Ilija, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Bobic Biljana, Tehnologija dobijanja kompozitnih materijala sa osnovom od ZA27 legure uz dodatak čestica Al2O3, null 80.a2.pdf
|
3. Bobic Ilija, Bobic Biljana, Babic Miroslav, Mitrovic Slobodan, Vencl Aleksandar, Tadic Branko, Električna metoda za kontrolu reološkog ponašanja poluočvrslih rastopa osnovnih legura i kompozita pri izvođenju reo/kompokasting postupka, null 80.a5.pdf
|
4. Bobic Ilija, Vencl Aleksandar, Babic Miroslav, Mitrovic Slobodan, Bobic Biljana, Tehnološki postupak dobijanja kompozita sa osnovom od Al7Si0,03Mg (А356) legure uz dodatak sitnih čestica Al2O3, null 80.a4.pdf
|
5. Tadic Branko, Babic Miroslav, Mitrovic Slobodan, Todorovic Petar, Bobic Ilija, Zajednički merni sistem za univerzalni tribometar - tribološki merni centar, null 80.a8.pdf
|
6. Tadic Branko, Babic Miroslav, Mitrovic Slobodan, Lazic Miodrag, Vukelic Djordje, Univerzalni tribometar, null 80.a1.pdf
|
7. Bobic Ilija, Vencl Aleksandar, Babic Miroslav, Mitrovic Slobodan, Bobic Biljana, Tehnološki postupak dobijanja dvojnog hibridnog kompozita sa osnovom od A356 legure aluminijuma uz dodatak10 mas. % čestica SiC i 1 mas. % čestica grafita, null 80.a6.pdf
|
8. Erić Milan, Mitrovic Slobodan, Babic Miroslav, Tadic Branko, Baza podataka triboloških istraživanja, null 80.b1.pdf
|
| |
contributionToPeriodical
|
1. Ivkovic Branko, Babic Miroslav, Mitrovic Slobodan, PROCEEDINGS - 12th International Conference on Tribology - SERBIATRIB '11, null proceedings-serbiatrib.11.pdf
|
2. Babic Miroslav, Mitrovic Slobodan, PROCEEDINGS - 13th International Conference on Tribology - SERBIATRIB '13, null proceedings-serbiatrib.13.pdf
|
