| |
article
|
1. Adamovic Dragan, Stefanovic Milentije, Plancak Miroslav, Aleksandrovic Srbislav, ANALYSIS OF CHANGE OF TOTAL IRONING FORCE AND FRICTION FORCE ON PUNCH AT IRONING, null (ISSN 0354-3870) 85 J Techn Plast 2008 23-37.pdf
|
2. Adamovic Dragan, Stefanovic Milentije, Gulišija Z., Aleksandrovic Srbislav, Zivkovic Miroslav, Devedzic Goran, CHANGING OF TENSION STRESS OF IRONED ALUMINIUM WORK PIECE WALL, null (ISSN 0354-3870) 97 Adam et al - 2009-J for Techn of Plast - 34-1_2 69-79.pdf
|
3. Aleksandrovic Srbislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, VARIATION OF NORMAL ANISOTROPY RATIO "r" DURING THE PLASTIC FORMING, null (ISSN 0039-2480) 92_Aleksandrovic_2009__p392_399.pdf
|
4. Adamovic Dragan, Mandic Vesna, Jurkovic Zoran, B. Grizelj, Stefanovic Milentije, Marinkovic Tomislav, Aleksandrovic Srbislav, AN EXPERIMENTAL MODELLING AND NUMERICAL FE ANALYSIS OF STEEL-STRIPE IRONING PROCESS, null (ISSN 1330-3651) 106-Adam et al-Tehn Vj Slav Brod - tv__2010_-_435_444.pdf
|
5. Adamovic Dragan, Babic Miroslav, Stefanovic Milentije, Aleksandrovic Marko, Golusija Z., Mitrovic Slobodan, Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricant Testing, null (ISSN 1310-4772) 2.8a.pdf
|
6. Devedzic Goran, Milošević Danijela, Ivanović Lozica, Adamovic Dragan, Manić M., Reasoning with linguistic preferences using NPN logic, null, 10.2298/CSIS090223003D (ISSN 1820-0214) 1820-02141000003D.pdf
|
7. Ristić Branko, Popović Zoran, Adamovic Dragan, Devedzic Goran, Selection of biomaterials in orthopedic surgery, null, 10.2298/vsp1010847r (ISSN 0042-8450)
|
8. Aleksandrovic Srbislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, Babic Miroslav, Nikolic Ruzica, VUJINOVIĆ Tomislav, VARIABLE TRIBOLOGICAL CONDITIONS ON THE FLANGE AND NONMONOTONOUS FORMING IN DEEP DRAWING OF COATED SHEETS, null (ISSN 1310-4772) 112--J of the Balk Trib As-17 -2-165-178 - 2011.pdf
|
9. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Gulišija Z., Zivkovic Miroslav, Djačić Slaviša, Zivic Fatima, Analysis of the surface state of tools influence on the ironing process, null, 10.2478/v10211-011-0011-2 (ISSN 0354-3870) 130-Journ of Tech of Plast --2011.pdf
|
10. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Hard Cr Coatings for Cold Forming, null (ISSN 0354-8996) 2.5.pdf
|
11. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null (ISSN 1310-4772) 2.3.pdf
|
12. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Favaro G., A Comparison of Reciprocating Sliding at Low Loads and Scratch Testing for Evaluation of TiN (PVD) Coating, null (ISSN 1310-4772) 2.1.pdf
|
13. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Todorovic Petar, Favaro G., Pantić Marko, Influence Of The Surface Roughness On Adhesion Of Chrome Coatings On Alloy Tool Steel X165CRMOV12, null 2.4.pdf
|
14. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Erić Milan, Dzunic Dragan, Pantić Marko, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null (ISSN 1310-4772) 2.3.pdf
|
15. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, Taranović Dragan, Variable Contact Pressure and Variable Drawbead Height Influence on Deep Drawing of Al Alloys Sheets, null (ISSN 0562-1887) STROJARSTVO-2012-109-115.pdf
|
16. Zivic Fatima, Babic Miroslav, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding, null, 10.1016/j.wear.2013.01.109 (ISSN 0043-1648)
|
17. Adamovic Dragan, Mandic Vesna, Zivkovic Miroslav, Gulišija Z., Stefanovic Milentije, Topalović Marko, Aleksandrovic Srbislav, Numerical modeling of ironing process, null (ISSN 0354-3870) J for Tech of Plast 2013 - N. Sad.pdf
|
18. Aleksandrovic Srbislav, Milan Djordjevic, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Arsić Dušan, Different Ways of Friction Coefficient Determination in Stripe Ironing Test, null (ISSN 0354-8996) S. Aleksandrovic et al. Trib in Ind 2014.pdf
|
19. Petrovic Savic Suzana, Adamovic Dragan, Devedzic Goran, Ristić Branko, Matić Aleksandar, Contact stress generation on the UHMWPE tibial insert, null (ISSN 0354-8996) Contact stress generation on the UHMWPE tibial insert.pdf
|
20. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction Coefficient of UHMWPE During Dry Reciprocating Sliding, null (ISSN 0354-8996) 2.18.pdf
|
21. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions, null, 10.1016/j.apsusc.2013.11.050 (ISSN 0169-4332)
|
22. Pantić Marko, Mitrović Slobodan, Babic Miroslav, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic, null (ISSN 0354-8996) 2.22.pdf
|
23. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles, null (ISSN 0354-8996) 2.23.pdf
|
24. Adamovic Dragan, Stefanovic Milentije, Zivkovic Miroslav, Mitrovic Slobodan, Živković Jelena, Zivic Fatima, Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing, null (ISSN 0354-8996) 2.21.pdf
|
25. Zivic Fatima, Grujovic Nenad, Mitrović Slobodan, Adamovic Dragan, Radovanovic A., Palic Nikola, Friction and Adhesion in Porous Biomaterial Structure, null (ISSN 0354-8996) 2.28.pdf
|
26. Živković Jelena, Adamovic Dragan, Zivkovic Miroslav, Stefanovic Milentije, Mitrovic Slobodan, Zivic Fatima, Electronic databases for materials selection, null (ISSN 1584-2665) ANNALS 2016.pdf
|
27. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Jevremović Darko, Dry Sliding Wear Behavior of PVD TiN Coatings for Cold Forming Tools, null (ISSN 1310-4772) JBTA Vol.22, No.1 2016.pdf
|
28. Jovanović Živana, Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Mitrovic Slobodan, REVIEW OF EXISTING CLINICAL SOLUTIONS FOR ARTIFICIAL JOINTS, null, 10.24874/PES01.01.092 (ISSN 2620-2832)
|
29. Nedic Bogdan, Slavković L., Đuric Nenad, Adamovic Dragan, Mitrovic Slobodan, SURFACE ROUGHNESS QUALITY, FRICTION AND WEAR OF PARTS OBTAINED ON 3D PRINTER, null, 10.24874/PES01.01.013 (ISSN 2620-2832)
|
30. Busarac Nina, Jovanovic Zorica, Nježić Z., Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Experimental study and analytical model of shear thinning in 3d bioprinting of gelatin, null, 10.24874/ti.964.09.20.09 (ISSN 0354-8996) 10.24874-ti.964.09.20.09.pdf
|
31. Zivic Fatima, Adamovic Dragan, Mitrovic Slobodan, Grujovic Nenad, Tanaskovic Jovan, Stojadinovic I., Influence of different environments on the sliding friction of Ultra-high-molecular-weight polyethylene (UHMWPE), null, 10.1177/13506501211053100 (ISSN 1350-6501)
|
32. Sharma Varun, Zivic Fatima, Adamovic Dragan, Ljusic P., Kotorcevic N., Slavkovic Vukasin, Grujovic Nenad, Multi-Criteria Decision Making Methods for Selection of Lightweight Material for Railway Vehicles, null, 10.3390/ma16010368 (ISSN -)
|
33. Ivkovic Djordje, Adamovic Dragan, Arsić Dušan, Ratkovic Nada, Mitrović A., Nikolic Ruzica, Review of the advanced high-strength steels used in automotive industry, null, https://doi.org/10.24874/mvm.2023.49.03.04 (ISSN 1450-5304) Ivkovic et all paper_printed.pdf
|
34. Mandic Vesna, Milosavljevic Dj., Jurkovic Zoran, Adamovic Dragan, Experimental and numerical investigation of the deep drawing process using a tractrix die – An industrial case study focused on stress and temperature analysis, null, 10.14743/apem2024.1.498 (ISSN 1854-6250) APEM19-1_133-148.pdf
|
35. Mandic Vesna, Adamovic Dragan, Jurkovic Zoran, Delić Marko, Experimental and Numerical Analyses of the Temperature Field in the Ironing Process, null, 10.17559/TV-20231115001106 (ISSN 1330-3651) TV-20231115001106-F.pdf
|
36. Kotorčević Nikola, Milenković Strahinja, Zivic Fatima, Jordović Branka, Adamovic Dragan, Todorovic Petar, Grujovic Nenad, Material Extrusion 3D Printing of Micro-Porous Copper-Based Structure for Water Filters, null, Machines, 10.3390/machines12070470 (ISSN 2075-1702) machines-12-00470.pdf
|
37. Ivković Djordje, Arsić Dušan, Adamovic Dragan, Nikolic Ruzica, Mitrović Anđela, Bokůvka Otakar, Predicting the mechanical properties of stainless steels using Artificial Neural Networks, null, 10.30657/pea.2024.30.21 (ISSN 2353-7779) Predicting-the-mechanical-properties-of-stainless-steels-using-Artificial-Neural-Networks.pdf
|
| |
bookPart
|
1. Zivic Fatima, Grujovic Nenad, Adamovic Dragan, Divac D., Development of new composites made of waste materials for wood pallet element, null, 10.1007/978-3-319-62767-0_11
|
2. Zivic Fatima, Grujovic Nenad, Pellicer Eva, Sort J., Mitrovic Slobodan, Adamovic Dragan, Vulovič M., Biodegradable metals as biomaterials for clinical practice: Iron-based materials, null, 10.1007/978-3-319-68025-5_9
|
3. Adamovic Dragan, Ristic Branko, Zivic Fatima, Review of existing biomaterials-method of material selection for specific applications in orthopedics, null, 10.1007/978-3-319-68025-5_3
|
4. Adamovic Dragan, Zivic Fatima, Hardness and Non-Destructive Testing (NDT) of Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00074-4 (ISSN -)
|
5. Adamovic Dragan, Zivic Fatima, Static Mechanical Characterization of Ceramic Matrix Composites (CMCs), null, 10.1016/B978-0-12-819724-0.00069-0 (ISSN -)
|
| |
conferenceObject
|
1. Stefanovic Milentije, Aleksandrovic Srbislav, Adamovic Dragan, Deformaciono ojačavanje čeličnih limova pri višestepenoj redukciji debljine, null 7 - Bor 1990.pdf
|
2. Stefanovic Milentije, Adamovic Dragan, Aleksandrovic Srbislav, FRICTION AT SHEET METAL TESTING BY IRONING IN CONDITIONS OF HIGH PRESSURE, null 6 - Str pleso 1990.pdf
|
3. Adamovic Dragan, Stefanovic Milentije, Plancak Miroslav, Aleksandrovic Srbislav, Analysis of change of total drawing force and friction force on punch at ironing, null 82-ICMEN 2008 DAd 245-254.pdf
|
4. Stefanovic Milentije, Aleksandrovic Srbislav, Milovanovic Milan, Adamovic Dragan, Formability of sheet materials for light automotive panels, null 81-ICMEN 2008 MSt 263-270.pdf
|
5. Babic Miroslav, Adamovic Dragan, Jeremic B., Mitrovic Slobodan, Tribological effects of shot peening surface treatment, null 2008_ICMEN_657-664.pdf
|
6. Adamovic Dragan, Devedzic Goran, Ristic Branko, Ivanović Lozica, Izbor materijala za implantate, null A11_Adamovic_Devedzic_Ristic_Ivanovic.pdf
|
7. Stefanovic Milentije, Aleksandrovic Srbislav, Djorovic Stanojevic Mica, Adamovic Dragan, Ekološki prihvatljive tehnologije obrade metala deformisanjem, null 91 SPMS 2009 - 331-334.pdf
|
8. Stefanovic Milentije, Aleksandrovic Srbislav, Adamovic Dragan, Samardžic M., Uticaj kontaktnih uslova na oblikovanje dvostranim zatezanjem tankih limova, null 87-MStef et al-Srb Trib 2009-334-337.pdf
|
9. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Modeliranje triboloških procesa pri obradi dubokim izvlačenjem sa stanjenjem debljine zida, null 88 Ad DEMI 2009 157-162.pdf
|
10. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Djačić Slaviša, Adjustable drawbead and variable contact pressure as tribological influences in sheet metal stripe sliding test, null 126-ICMEN_2011 - 597-605.pdf
|
11. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, null Serbiatrib 11_168-173.pdf
|
12. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Gulišija Z., The Influence of Various Process Parameters on Coefficient of Friction on Die at Ironing of AlMg3 Sheet Metals, null 118-SERBIATRIB 2011 - 342-348.pdf
|
13. Zivic Fatima, Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Favaro G., Pantić Marko, Influence of the Surface Roughness on Adhesion of Chrome Coatings on Alloy Tool Steel X165CRMOV12, null COATINGS_2011_389-396.pdf
|
14. Adamovic Dragan, Mandic Vesna, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Gulišija Z., Randjelovic Sasa, Experimental and numerical determination of the tensile stresses in the wall during steel sheet ironing, null 127-ICMEN_2011 - 621-630.pdf
|
15. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, null Serbiatrib 11_174-179.pdf
|
16. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Grujovic Nenad, Tribology in Biomaterials Design and Selection, null Serbiatrib 11_157-167.pdf
|
17. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, null 116-SERBIATRIB 2011 - 358-365.pdf
|
18. Djačić Slaviša, Stefanovic Milentije, Aleksandrovic Srbislav, Adamovic Dragan, Characteristics of Friction in Sheet Metal Sliding with Thickness Reduction, null 119-SERBIATRIB 2011 - 366-369.pdf
|
19. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null Balkantrib 2011_69-76.pdf
|
20. Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Dzunic Dragan, Zivic Fatima, The effect of shot peening on tribological behavior of alloyed steels, null shotpeener.pdf
|
21. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Variable contact pressure and variable drawbead height influence on deep drawing of Al alloys sheets, null 120-ICPE 2011 - 277-280.pdf
|
22. Stefanovic Milentije, Vilotic Dragisa, Plancak Miroslav, Aleksandrovic Srbislav, Gulišija Z., Adamovic Dragan, Forming limit indicators in metal forming, null 114-- DEMI-2011-327-336.pdf
|
23. Stefanovic Milentije, Djačić Slaviša, Aleksandrovic Srbislav, Adamovic Dragan, Importance of tribological conditions at multi-phase ironing, null 125-ICPE 2011 - 503-506.pdf
|
24. Stefanovic Milentije, Vilotic Dragisa, Plancak Miroslav, Aleksandrovic Srbislav, Adamovic Dragan, Influence of strain history on limit formability in metal forming, null 128-ICMEN_2011 - 569-578.pdf
|
25. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Gulišija Z., Djačić Slaviša, The influence of tool surface condition on ironing process execution, null 121ICPE 2011 - 289-292.pdf
|
26. Stefanovic Milentije, Aleksandrovic Srbislav, Adamovic Dragan, Paper about papers in the area of metal forming presented at DEMI conferences held so far, null 115-- DEMI-2011-391-398.pdf
|
27. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Computer controlled experimental device for investigations of tribological influences in sheet metal forming, null 113- DEMI-2011-285-290.pdf
|
28. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Cr Hard Coatings for Cold Forming Tools Under Dry Sliding Conditions, null PM 34_519-522.pdf
|
29. Adamovic Dragan, Stefanovic Milentije, Jeremic B., Aleksandrovic Srbislav, : The effects of shot peening on the fatigue life of machine elements, null 122-ICPE 2011 - 421-424.pdf
|
30. Stefanovic Milentije, Aleksandrovic Srbislav, Djorovic Stanojevic Mica, Adamovic Dragan, Gulišija Z., Djordjevic Milan, Ecological metal forming technologies -possibilities and limitations, null KODIP 2012 - ceo.pdf
|
31. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS, null Bultrib 12-155 .pdf
|
32. Adamovic Dragan, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Zivic Fatima, Topalović Marko, Analysis of tribological process during ironing of sheet metal made of AlMg3, null SERBIATRIB 2013 - 265-269.pdf
|
33. Stefanovic Milentije, Adamovic Dragan, Djorovic Stanojevic Mica, Gulišija Z., Aleksandrovic Srbislav, Development of new lubricants for metal forming, null KODIP 2013 Maz - rad.pdf
|
34. Stefanovic Milentije, Mandic Vesna, Gulišija Z., Aleksandrovic Srbislav, Adamovic Dragan, Improving the quality of Al-alloys hot forging, null DEMI 2013 -Proc-447-452.pdf
|
35. Petrovic Savic Suzana, Adamovic Dragan, Devedzic Goran, Ristic Branko, Matic Aleksandar, Influence Of The Material Type, Flexion Degree And Axial Compressive Loads On Contact Stress Generation On The Tibial Insert Of The Total Knee Endoprosthesis, null ICPE - 35_Petrovic et al.pdf
|
36. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Pelemis Svetlana, Friction coefficient of UHMWPE during dry reciprocating sliding, null Serbiatrib13 087-091.pdf
|
37. Zivic Fatima, Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Friction coefficient during reciprocating sliding of UHMWPE in ringer's solution, null Polycomtrib2013.pdf
|
38. Adamovic Dragan, Mandic Vesna, Stefanovic Milentije, Aleksandrovic Srbislav, Zivkovic Miroslav, Analysis of the temperature change on the tool and work piece during the ironing process, null DEMI 2013 -Proc-299-306.pdf
|
39. Stefanovic Milentije, Dzunic Dragan, Mandic Vesna, Aleksandrovic Srbislav, Adamovic Dragan, Mitrovic Slobodan, Increasing of tool life for hot forging using surface modification, null Serbiatrib13 261-264.pdf
|
40. Aleksandrovic Srbislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Djordjevic Milan, Arsić Dušan, Different ways of friction coefficient determination in stripe ironing test, null proceedings_paper.pdf
|
41. Đorđević Zorica, Jovanović Saša, Bojic Milorad, Adamovic Dragan, Matejic Milos, THE INFLUENCE OF TV AND VIDEO APPLIANCES AND INFORMATION TECHNOLOGY EQUIPMENT ON ENERGY CONSUMPTION IN HOUSEHOLDS, null 2013-M33-IQC-Djordjevic - Rad.pdf
|
42. Jeremic Marija, Adamovic Dragan, Mitrovic Slobodan, Bogdanovic Bojan, Simic Aleksandar, Randjelovic Sasa, Todorovic Petar, Influence of oxidation layer generated on preheated contact pairs on static coefficient of friction, null Serbiatrib13 147-152.pdf
|
43. Mikovic Jasmina, Velickovic Sandra, Adamovic Dragan, Aleksandrovic Srbislav, Ćatić Dobrivoje, Application of Taguchi methods in testing tensile strength of polyethylene, null 066 (1).pdf
|
44. Velickovic Sandra, Mikovic Jasmina, Adamovic Dragan, Aleksandrovic Marko, Glišović Jasna, Ćatić Dobrivoje, Investigation of the environmental factors' influence on the mechanical properties of plastics, null 059.pdf
|
45. Stefanovic Milentije, Adamovic Dragan, Aleksandrovic Srbislav, Gulišija Z., Milovanovic Milan, Samardžic M., Influence of contact conditions and strain path on stretching of steel and Al-alloy sheet metals, null ICMEN_2014 - 51-60.pdf
|
46. Stefanovic Milentije, Adamovic Dragan, Gulišija Z., Aleksandrovic Srbislav, Kraisnik Milija, Mandic Vesna, Characteristics and limitations of physical tribo-modelling in deep drawing of thin sheet metal, null SERBIATRIB 2015-382-387.pdf
|
47. Zivic Fatima, Grujovic Nenad, Mitrovic Slobodan, Adamovic Dragan, Petrovic Vojislav, Bukvic L., Radovanović Andreja, Influence of the biomaterial porosity on the host tissue response, the friction and adhesion, null Serbiatrib15 475-484.pdf
|
48. Živković Jelena, Adamovic Dragan, Zivkovic Miroslav, Stefanovic Milentije, Mitrovic Slobodan, Zivic Fatima, Electronic Databases for Materials Selection, null Demi2015 569-576.pdf
|
49. Stefanovic Milentije, Adamovic Dragan, Gulišija Z., Aleksandrovic Srbislav, Mandic Vesna, Milovanovic Milan, Limitations of physical tribo-modeling in metal forming processes, null DEMI 2015 - 111-118.pdf
|
50. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Dzunic Dragan, Zivic Fatima, Adamovic Dragan, AFM surface roughness and topography analysis of lithium disilicate glass ceramic, null Serbiatrib15 514-521.pdf
|
51. Adamovic Dragan, Stefanovic Milentije, Zivkovic Miroslav, Mitrovic Slobodan, Živković Jelena, Zivic Fatima, Influence of lubricant type on the surface quality of aluminium parts obtained by ironing, null Serbiatrib15 397-406.pdf
|
52. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nedeljković B., Nanoindentation of ZA27 alloy based nanocomposites reinforced with Al2O3 particles, null Serbiatrib15 073-080.pdf
|
53. Adamovic Dragan, Zivkovic Miroslav, VUJINOVIĆ Tomislav, Mitrovic Slobodan, Živković Jelena, Dzunic Dragan, DAMAGE AND DESTRUCTION OF WORKPIECE AND TOOL SURFACES IN IRONING PROCESS, null serbiatrib 17-388.pdf
|
54. LEKOVIC Katarina, Sharma Varun, Grujovic Nenad, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, HIGH FRICTION COEFFICIENT MATERIALS, null serbiatrib 17-128.pdf
|
55. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, MICRO SCRATCH BEHAVIOUR OF LITHIUM DISILICATE GLASS CERAMIC AFTER GLAZING TREATMENT, null serbiatrib 17-645.pdf
|
56. Adamovic Dragan, Živković Jelena, Nedic Bogdan, Zivic Fatima, Mitrovic Slobodan, Zivkovic Miroslav, ANALYSIS OF THE PROCESS PARAMETERS INFLUENCE ON THE CHANGE OF MEAN CONTACT PRESSURE IN IRONING PROCESS, null, 10.24874/PES01.01.063 (ISSN 2620-2832)
|
57. Zivic Fatima, Adamovic Dragan, Mitrovic Slobodan, Grujovic Nenad, Tanaskovic Jovan, Busarac Nina, Stojadinović Ivan, Friction coefficient during the reciprocating sliding of UHMWPE in different environments, null Balkantib 20-2.pdf
|
58. Busarac Nina, Kotorčević Nikola, Mitrovic Slobodan, Adamovic Dragan, Todorovic Petar, Grujovic Nenad, Zivic Fatima, APPLICATION OF THE FRACTAL GEOMETRY IN WEAR VOLUME CALCULATIONS AT MICRO SCALE, null 1.SERBIATRIB.23.pdf
|
59. Ivkovic Djordje, Adamovic Dragan, Arsić Dušan, Ratkovic Nada, Nikolic Ruzica, Review of the first generation of the advanced high-strength steels (AHSS) and their manufacturing procedures, null Ivkovic et al._SPMS_proceedings.pdf
|
60. Delić Marko, Mandic Vesna, Adamovic Dragan, Arsić Dušan, Ivkovic Djordje, Ratkovic Nada, Analysis of photogrammetry application possibilities for reverse engineering of components in the auto industry, null Delic et. al.pdf
|
61. Ratkovic Nada, Adamovic Dragan, Aleksandrovic Srbislav, Mandic Vesna, Arsić Dušan, Delić Marko, Jovanović Živana, Advanced welding technologies: FSW in automotive manufacturing, null N. Ratkovic et al_MVM2024.pdf
|
62. Ratkovic Nada, Adamovic Dragan, Aleksandrovic Srbislav, Mandic Vesna, Arsić Dušan, Delić Marko, Jovanović Živana, Advanced welding technologies: FSW in automotive manufacturing, null N. Ratkovic_MVM_abstract.pdf
|
63. Adamovic Dragan, Mandic Vesna, Ratkovic Nada, Arsić Dušan, Ivkovic Djordje, Delić Marko, Topalović Marko, Modern materials in automotive industry - review, null Adamovic et. al.pdf
|
64. Adamovic Dragan, Mandic Vesna, Ratkovic Nada, Arsić Dušan, Ivkovic Djordje, Delić Marko, Topalović Marko, Modern materials in automotive industry - review, null D. Adamovic_MVM_abstract.pdf
|
65. Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Mandic Vesna, Delić Marko, Andjela Mitrović, Ratkovic Nada, Application of high strength steels in automotive industry, null D. Arsic_MVM_abstract.pdf
|
66. Delić Marko, Mandic Vesna, Adamovic Dragan, Arsić Dušan, Ivkovic Djordje, Ratkovic Nada, Analysis of photogrammetry application possibilities for reverse engineering of components in the auto industry, null M. Delic_MVM_abstract.pdf
|
67. Ivkovic Djordje, Arsić Dušan, Andjela Mitrović, Adamovic Dragan, Milovanović Vladimir, Mandic Vesna, Delić Marko, Influence of tempering temperature on mechanical properties of G42CrMo4 cast steel, null, 10.5937/OTEH24081I Ivkovic et al._OTEH_2024.pdf
|
68. Delić Marko, Mandic Vesna, Aleksandrovic Srbislav, Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Ratkovic Nada, Influence of FDM printing parameters on the compressive mechanical properties and fracture behavior of ABS material, null ECF24 rad 2.pdf
|
69. Ivkovic Djordje, Arsić Dušan, Adamovic Dragan, Sedmak Aleksandar, Mandic Vesna, Delić Marko, Andjela Mitrović, A new artificial neural network model for predicting fatigue limit and fracture toughness values of some stainless steels, null ECF24 rad 1.pdf
|
70. Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Mandic Vesna, Delić Marko, Andjela Mitrović, Ratkovic Nada, Application of high strength steels in automotive industry, null Arsic et al.pdf
|
71. Ivkovic Djordje, Arsić Dušan, Adamovic Dragan, Nikolic Ruzica, Mitrović Anđela, Bokůvka Otakar, Predicting the yield stress and tensile strength of two stainless steel using artificial intelligence, null Ivkovic et al_SEMDOK 2024.pdf
|
72. Ivković Djordje, Arsić Dušan, Adamovic Dragan, Andjela Mitrović, Assessment of mechanical properties of austenitic stainless steels using artificial neural networks, null Ivkovic et al_DT-Conference-Book of Abstracts-2024.pdf
|
| |
technicalReport
|
1. Despotovic Milan, Bojic Milorad, Lukic Nebojsa, Adamovic Dragan, Taranović Dragan, Cvetković Dragan, Miletic Marko, Softver za podršku razvoju kuće neto nulte energetske potrošnje, null tr-softver_nnek.pdf
|
