| |
article
|
1. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles, null (ISSN 0354-8996) TI_2008_33-39.pdf
|
2. Babic Miroslav, Mitrovic Slobodan, Dzunic Dragan, Jeremic B., Ilija B., Tribological behavior of composites based on ZA-27 alloy reinforced with graphite particles, null, 10.1007/s11249-009-9535-2 (ISSN 1023-8883)
|
3. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Hard Cr Coatings for Cold Forming, null (ISSN 0354-8996) 2.5.pdf
|
4. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null (ISSN 1310-4772) 2.3.pdf
|
5. Mitrovic Slobodan, Babic Miroslav, Stojanovic Blaza, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with SiC and Graphite Particles, null (ISSN 0354-8996) 11_TI_Mitrovic_2012.pdf
|
6. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Erić Milan, Dzunic Dragan, Pantić Marko, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null (ISSN 1310-4772) 2.3.pdf
|
7. Vukelic Djordje, Miljanić Dragomir, Randjelović Saša, Budak Igor, Dzunic Dragan, Erić Milan, Pantić Marko, BURNISHING PROCESS BASED ON THE OPTIMAL DEPTH OF WORKPIECE PENETRATION, null (ISSN 1580-2949) 4M23.pdf
|
8. Jeremic B., Vukelic Djordje, Todorovic Petar, Macuzic Ivan, Pantić Marko, Dzunic Dragan, Tadic Branko, Static friction at high contact temperatures and low contact pressure, null, 10.3103/S1068366613020037 (ISSN 1068-3666)
|
9. Babic Miroslav, Stojanovic Blaza, Mitrovic Slobodan, Bobic Ilija, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions, null (ISSN 0354-8996) 12_TI_Babic_2013.pdf
|
10. Mitrovic Slobodan, Babic Miroslav, Miloradović Nenad, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, Pantić Marko, Wear characteristics of hybrid composites based on Za27 alloy reinforced with silicon carbide and graphite particles, null (ISSN 0354-8996) 20_TI_Mitrovic_2014.pdf
|
11. Erić Milan, Babic Miroslav, Mitrovic Slobodan, Tadić Branko, Dzunic Dragan, Conversion of data into information in tribology research, null (ISSN 1310-4772) 2.15.pdf
|
12. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions, null, 10.1016/j.apsusc.2013.11.050 (ISSN 0169-4332)
|
13. Pantić Marko, Mitrović Slobodan, Babic Miroslav, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic, null (ISSN 0354-8996) 2.22.pdf
|
14. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles, null (ISSN 0354-8996) 2.23.pdf
|
15. Peko Ivan, Nedic Bogdan, Djordjevic Aleksandar, Dzunic Dragan, Janković M, Veža Ivica, Modeling of Surface Roughness in Plasma Jet Cutting Process of Thick Structural Steel, null 9.pdf
|
16. Arsić Dušan, Lazic Vukic, Mitrovic Slobodan, Dzunic Dragan, Aleksandrovic Srbislav, Djordjevic Milan, Nedeljković B., Tribological behavior of four types of filler metals for hard facing under dry conditions, null, 10.1108/ILT-10-2015-0156 (ISSN 0036-8792)
|
17. Mitrovic Slobodan, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Jevremović Darko, Dry Sliding Wear Behavior of PVD TiN Coatings for Cold Forming Tools, null (ISSN 1310-4772) JBTA Vol.22, No.1 2016.pdf
|
18. Vukelic Djordje, Tadic Branko, Dzunic Dragan, Kočović Vladimir, Brzakovic Ljiljana, Živković Milutin, Šimunovic̈ Goran, Analysis of ball-burnishing impact on barrier properties of wood workpieces, null, 10.1007/s00170-017-0134-3 (ISSN 0268-3768)
|
19. Pantić Marko, Dordević A., Erić Milan, Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Stefanovic Miladin, Application of artificial neural network in biotribological research of dental glass ceramic, null, 10.24874/ti.2018.40.04.15 (ISSN 0354-8996) 10.24874-ti.2018.40.04.15.pdf
|
20. Djordjevic Aleksandar, Erić Milan, Stefanovic Miladin, Mitrovic Slobodan, Pantić Marko, Kokić Arsić A., Dzunic Dragan, PREDICTING CUTTING PARAMETERS BY APPLYING DEVELOPED NEURAL NETWORK AND LINEAR REGRESSION MODELS, null, 10.24874/PES01.01.064 (ISSN 2620-2832)
|
21. Arsić Dušan, Lazic Vukic, Dzunic Dragan, Aleksandrovic Srbislav, Đorđević M., Uhríčik Milan, Arsić Aleksandra, WEAR RESISTANCE UNDER DRY CONDITIONS OF DIFFERENT FILLER METALS USED FOR HARD FACING, null, 10.24874/PES01.01.055 (ISSN 2620-2832)
|
22. Velickovic Sandra, Stojanovic Blaza, Vencl Aleksandar, Babic Miroslav, Dzunic Dragan, Pantić Marko, Šljivić V., TRIBOLOGICAL BEHAVIOUR OF A356/SIC NANOCOMPOSITE, null, 10.24874/PES01.01.016 (ISSN 2620-2832)
|
23. Milojević Saša, Dzunic Dragan, Taranovic Dragan, Pesic Radivoje, Mitrovic Slobodan, OPTIMIZATION OF MECHANICAL LOSSES IN RECIPROCATING AIR COMPRESSOR WITH CYLINDER CONSISTING OF ALUMINUM ALLOY, null, 10.24874/PES01.01.046 (ISSN 2620-2832)
|
24. Pantić Marko, Dzunic Dragan, Babic Miroslav, Mitrovic Slobodan, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić A., NANOINDENTATION OF ZIRCONIUM DENTAL CERAMIC PREPARED WITH DIFFERENT FINISHING TECHNIQUES, null, 10.24874/PES01.01.093 (ISSN 2620-2832)
|
25. Dzunic Dragan, Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić A., ASSESSMENT OF TRIBOLOGICAL BEHAVIOUR OF ZA-27 ZINC-ALUMINIUM ALLOY BASED NANOCOMPOSITE, null, 10.24874/PES01.01.020 (ISSN 2620-2832)
|
26. Babic Miroslav, Stojanovic Blaza, Dzunic Dragan, Pantić Marko, Micro/nanoscale structural, mechanical and tribological characterization of ZA-27/SiC nanocomposites, null, 10.1177/0021998319891766 (ISSN 0021-9983)
|
27. Simonovic M., Dzunic Dragan, Mitrovic Slobodan, TESTING OF WEAR IN CONTACT WITH STRENX 700 AND AUTOFRETTED STEEL, null, 10.24867/JPE-2020-01-011 (ISSN 1821-4932) 2-Simonovic_JPE_23_No1-1.pdf
|
28. Nedic B., Lazarevic M., Dzunic Dragan, Bogdanov Jovica, Durić G., Nano identification and tribo testing of explosive welding copper/brass, null, 10.24874/ti.1068.12.20.02 (ISSN 0354-8996) 10.24874-ti.1068.12.20.02.pdf
|
29. Milojević Saša, Dzunic Dragan, Maric Dejan, Skrúcaný T., Mitrovic Slobodan, Pesic Radivoje, Tribological assessment of aluminum cylinder material for piston compressors in trucks and buses brake systems, null, 10.17559/TV-20200915110030 (ISSN 1330-3651) 10.17559-TV-20200915110030.pdf
|
30. Zivic Fatima, Mitrovic Slobodan, Grujovic Nenad, Jovanović Živana, Dzunic Dragan, Milenković Strahinja, The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding, null, 10.3103/S1068366621020124 (ISSN 1068-3666)
|
31. Zivic Fatima, Mitrovic Slobodan, Grujovic Nenad, Jovanović Živana, Dzunic Dragan, Milenković Strahinja, The Influence of the 3D Printing Infill and Printing Direction on Friction and Wear of Polylactic Acid (PLA) under Rotational Sliding, null, https://doi.org/10.3103/S1068366621020124 (ISSN 1068-3666) The Influence of the 3D Printing Infill and Printing Direction.pdf
|
32. Kočović Vladimir, Dzunic Dragan, Kostić Sonja, Brzakovic Ljiljana, Tadic Branko, Prica Miljana, Vukelic Djordje, Investigation into the Effects of Roller Pressing on Hardness, Roughness and Elastic Modulus of Wooden Workpieces, null, 10.3390/app12115575 10.3390-app12115575.pdf
|
33. Todic A., Djordjevic Milan, Arsić Dušan, Dzunic Dragan, Lazic Vukic, Aleksandrovic Srbislav, Krstić B., INFLUENCE OF VANADIUM CONTENT ON THE TRIBOLOGICAL BEHAVIOUR OF X140CrMol2-l AIR-HARDENING STEEL, null, 10.21278/TOF.462035021 (ISSN 1333-1124) 10.21278-TOF.462035021.pdf
|
34. Ratkovic Nada, Jovanović Pešić Živana, Arsić Dušan, Pešić Miloš, Dzunic Dragan, Tool geometry effect on material flow and mixture in FSW, null, 10.24867/ATM-2022-2-006 (ISSN 2620-0325) ATM-2022-2-006.pdf
|
35. Kostić Sonja, Živković Bogdan, Ivanović Aleksandra, Džunić Dragan, Petrović Savić Suzana, Kočović Vladimir, DEVELOPMENT OF DEVICES FOR TESTING DYNAMIC DURABILITY OF MATERIALS, null, 10.24874/mvm.2022.48.02.05 (ISSN 1450-5304) DEVELOPMENT OF DEVICES FOR TESTING DYNAMIC DURABILITY.pdf
|
36. Milosevic Marko, Dzunic Dragan, Valasek Petr, Mitrovic Slobodan, Ruggiero Alessandro, Effect of Fiber Orientation on the Tribological Performance of Abaca-Reinforced Epoxy Composite under Dry Contact Conditions, null, 10.3390/jcs6070204 10.3390-jcs6070204.pdf
|
37. Đurovic Dragan, Stanojkovic Jelena, Lazarevic D., Andjelkovic Cirkovic Bojana, Lazarvić A., Dzunic Dragan, Sarkocevic Z., Modeling and Prediction of Surface Roughness in the End Milling Process using Multiple Regression Analysis and Artificial Neural Network, null, 10.24874/ti.1368.07.22.09 (ISSN 0354-8996)
|
38. Petrovic Savic Suzana, Mijailovic Nikola, Dzunic Dragan, Kočović Vladimir, Devedzic Goran, Synthesis of the Artificial Intelligence and Model-Based and Statistical Algorithms in the Classification of the Metal Surface Defects, null, 10.56042/ijems.v30i4.2105 (ISSN 0971-4588) IJEMS 30(4) 646-652.pdf
|
39. Nešović Aleksandar, Lukic Nebojsa, Jurišević Nebojša, Cvetković Dragan, Dzunic Dragan, Josijevic Mladen, Nedić Bogdan, EXPERIMENTAL ANALYSIS OF THE FIXED FLAT-PLATE SOLAR COLLECTOR WITH SN-AL2O3 SELECTIVE ABSORBER AND GRAVITY WATER FLOW, null, https://doi.org/10.2298/TSCI220904171N (ISSN 2334-7163) EXPERIMENTAL ANALYSIS OF THE FIXED FLAT-PLATE SOLAR COLLECTOR WITH Sn-AL2O3 SELECTIVE ABSORBER AND GRAVITY WATER FLOW.pdf
|
40. Petrovic Savic Suzana, Prodanovic Nikola, Kočović Vladimir, Prodanovic Tijana, Dzunic Dragan, Ristic Branko, Devedzic Goran, Estimation of the Cartilage Volume Loss Due to Knee Osteoarthritis - Case Study, null, 10.24874/ti.1454.12.22.03 (ISSN 03548996) 12-1454.pdf
|
41. Djordjevic Aleksandar, Pantić Marko, Petrovic Savic Suzana, Dzunic Dragan, Erić Milan, Stefanovic Miladin, Real-Time Nonconformity Management in SMEs Within the Internet of Things and Industry 4.0 Concepts, null, International Journal of Strategy and Organisational Learning (IJSOL), https://www.doi.org/10.56830/IJSOL06202404 04_Djordjevic-et-al-2024-Real-time-nonconformity-management-in-SMEs_Final.pdf
|
42. Djordjevic Aleksandar, Pantić Marko, Petrovic Savic Suzana, Dzunic Dragan, Kočović Vladimir, Stefanovic Miladin, Defining a Software Solution Requirements for Document Management in Public Enterprises: A Methodology of Organizations Reframing into Quality - Smart Public Enterprises, null, 10.24874/IJQR19.03-01 (ISSN 1800-6450) Manuscript IJQR 19-03-01.pdf
|
| |
book
|
1. Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Tribološka karakterizacija nanokompozita sa metalnom osnovom, null Monografija.pdf
|
| |
conferenceObject
|
1. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, null Serbiatrib 11_168-173.pdf
|
2. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, null Serbiatrib 11_174-179.pdf
|
3. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Influence Of Al2O3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composite, null Balkantrib 2011_59-67.pdf
|
4. Babic Miroslav, Adamovic Dragan, Mitrovic Slobodan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, null Balkantrib 2011_69-76.pdf
|
5. Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Dzunic Dragan, Zivic Fatima, The effect of shot peening on tribological behavior of alloyed steels, null shotpeener.pdf
|
6. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear Behaviour of Cr Hard Coatings for Cold Forming Tools Under Dry Sliding Conditions, null PM 34_519-522.pdf
|
7. Mitrovic Slobodan, Miloradović Nenad, Babic Miroslav, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, WEAR BEHAVIOUR OF HYBRID ZA27/SIC/GRAPHITE COMPOSITES UNDER DRY SLIDING CONDITIONS, null Bultrib 12-142.pdf
|
8. Mitrovic Slobodan, Babic Miroslav, Adamovic Dragan, Zivic Fatima, Dzunic Dragan, Pantić Marko, WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS, null Bultrib 12-155 .pdf
|
9. Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Zivic Fatima, Dzunic Dragan, Pantić Marko, Wear behaviour of composites based on ZA27 alloy reinforced with graphite particles, null Serbiatrib13 124-128.pdf
|
10. Stefanovic Milentije, Dzunic Dragan, Mandic Vesna, Aleksandrovic Srbislav, Adamovic Dragan, Mitrovic Slobodan, Increasing of tool life for hot forging using surface modification, null Serbiatrib13 261-264.pdf
|
11. Babic Miroslav, Stojanovic Blaza, Mitrovic Slobodan, Bobic Ilija, Miloradović Nenad, Pantić Marko, Dzunic Dragan, Wear properties of A356/10SiC/1Gr hybrid composites in lubricated sliding conditions, null Serbiatrib13 129-134.pdf
|
12. Mitrovic Slobodan, Babic Miroslav, Miloradović Nenad, Bobic Ilija, Stojanovic Blaza, Dzunic Dragan, Wear characteristics of hybrid composites based on ZA27 alloy reinforced with silicon carbide and graphite particles, null Serbiatrib13 141-146.pdf
|
13. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Dzunic Dragan, Zivic Fatima, Adamovic Dragan, AFM surface roughness and topography analysis of lithium disilicate glass ceramic, null Serbiatrib15 514-521.pdf
|
14. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Bobic Ilija, Pantić Marko, Adamovic Dragan, Nedeljković B., Nanoindentation of ZA27 alloy based nanocomposites reinforced with Al2O3 particles, null Serbiatrib15 073-080.pdf
|
15. Janjic Radomir, Mitrovic Slobodan, Dzunic Dragan, Macuzic Ivan, Stojanovic Blaza, Bukvic Milan, Ilic Zoran, MEASURING CLEANING CLASS OF OIL AFTER TRIBOLOGICAL TESTING, null OTEH 2016.pdf
|
16. Dzunic Dragan, Mitrovic Slobodan, Babic Miroslav, Pantić Marko, Bobic Ilija, TRIBOLOGICAL BEHAVIOR OF ZA-27 ALLOY BASED NANOCOMPOSITE REINFORCED WITH SiC NANOPARTICLES, null Bultrib 2018-2.pdf
|
17. Adamovic Dragan, Zivkovic Miroslav, VUJINOVIĆ Tomislav, Mitrovic Slobodan, Živković Jelena, Dzunic Dragan, DAMAGE AND DESTRUCTION OF WORKPIECE AND TOOL SURFACES IN IRONING PROCESS, null serbiatrib 17-388.pdf
|
18. Peko Ivan, Nedic Bogdan, Djordjevic Aleksandar, Djuric Stefan, Dzunic Dragan, Veža Ivica, Jankovic Marko, Prediction of Surface Roughness in Plasma Jet Cutting Process Using Neural Network Model, null 26.pdf
|
19. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Jevremović Danimir, Kanjevac Tatjana, Dzunic Dragan, Adamovic Dragan, MICRO SCRATCH BEHAVIOUR OF LITHIUM DISILICATE GLASS CERAMIC AFTER GLAZING TREATMENT, null serbiatrib 17-645.pdf
|
20. Djordjevic Aleksandar, Erić Milan, Pantić Marko, Dzunic Dragan, Stefanovic Miladin, Mitrovic Slobodan, POSSIBILITIES OF ARTIFICIAL NEURAL NETWORK APPLICATION IN BIOTRIBOLOGICAL RESEARCH, null serbiatrib 17-589.pdf
|
21. Dzunic Dragan, Babic Miroslav, Mitrovic Slobodan, Pantić Marko, Bobic Ilija, MICRO SCRATCH TEST CHARACTERISATION OF ZA-27/SiC NANOCOMPOSITES, null serbiatrib 17-75.pdf
|
22. Mitrovic Slobodan, Savini E., Dzunic Dragan, The strange case of compacted graphite iron: A remarkable option with unique material properties or an unusable alloy?, null, 10.4028/www.scientific.net/KEM.754.67 (ISSN 1013-9826)
|
23. Milojević Saša, Dzunic Dragan, Taranović Dragan, Pešić Radivoje, Mitrović Slobodan, TRIBOLOGICAL REINFORCEMENTS FOR CYLINDER LINER OF ALUMINUM - EXAMPLE COMPRESSORS FOR BRAKE SYSTEMS OF TRUCKS AND BUSES, null Milojevic_SERBIATRIB 2017.pdf
|
24. Pantić Marko, Mitrovic Slobodan, Babic Miroslav, Dzunic Dragan, Jevremovic Danimir, Jevremović Ana, Kanjevac Tatjana, IN VIVO STUDY OF THE NANOMECHANICAL PROPERTIES OF LEUCITE GLASS CERAMIC PREPARED WITH DIFFERENT SURFACE FINISHING PROCEDURES, null ETIKUM_2017_SM.pdf
|
25. Pantić Marko, Babic Miroslav, Mitrovic Slobodan, Jevremović Darko, Dzunic Dragan, Kanjevac Tatjana, Luković Ivana, EFFECTS OF DIFFERENT FINISHING PROCEDURE ONTO NANOMECHANICAL CHARACTERISTICS OF VENEERING CERAMIC, null Bultrib 2018-1.pdf
|
26. Dzunic Dragan, Mitrovic Slobodan, Pantić Marko, Babic Miroslav, PRIMENA „MICRO SCRATCH TESTER“-a ZA KARAKTERIZACIJU ZA-27 NANOKOMPOZITA OJAČANIH Al2O3 NANOČESTICAMA, null eKonferencije.pdf
|
27. Dzunic Dragan, Kočović Vladimir, Bijelić Ivan, Pantić Marko, Petrovic Savic Suzana, Mitrovic Slobodan, ANALYSIS OF BALL BURNISHING INFLUENCE ON TRIBOMECHANICAL PROPERTIES OF ALUMINUM, null SPMS 2018 - 2.pdf
|
28. Petrovic Savic Suzana, Pantić Marko, Dzunic Dragan, Kočović Vladimir, 3D Modeling Process Automatization Through Macros Implementation, null PS et al ICPE 18.pdf
|
29. Milojević Saša, Dzunic Dragan, Taranovic Dragan, Pešić Radivoje, Mitrović Slobodan, EXPERIMENTAL DETERMINATION OF TRIBOLOGICAL CHARACTERISTICS OF COMPOSITE MATERIALS IN USE FOR PARTS IN ALUMINUM AIR COMPRESSOR (PISTON AND CYLINDER), null MVM2018_066_Milojevic.pdf
|
30. Milojević Saša, Dzunic Dragan, Taranović Dragan, Pešić Radivoje, Mitrovic Slobodan, OPTIMIZATION OF MECHANICAL LOSSES IN RECIPROCATING AIR COMPRESSOR WITH CYLINDER CONSISTING OF ALUMINUM ALLOY, null (ISSN 2620-2832) Milojevic SERBIATRIB 2019.pdf
|
31. Dzunic Dragan, Kočović Vladimir, Pešić Darko, Kočović Vladimir, Pantić Marko, Kokić Arsić Aleksandra, TRIBOLOGICAL INVESTIGATION OF ZA-27 ALLOY BASED MICRO/NANO MIXED COMPOSITES, null Balkantib 20-1.pdf
|
32. Milosevic Marko, Dzunic Dragan, Valasek Petr, Mitrovic Slobodan, Ruggiero Alessandro, Effect of Fiber Orientation on Tribological Performance of Abaca Fiber Reinforced Epoxy Composite Under Dry Contact Conditions, null Effect of Fiber Orientation.pdf
|
33. Djordjevic Aleksandar, Pantić Marko, Dzunic Dragan, Mitrovic Slobodan, Erić Milan, Stefanovic Miladin, Kokić Arsić Aleksandra, SOFTWARE DEVELOPMENT SOLUTION FOR PREDICTION ON TRIBOLOGICAL PROPERTIES OF DENTAL GLASS CERAMICS BASED ON JAVASCRIPT WEB FRAMEWORKS, null Balkantib 20-3.pdf
|
34. Dzunic Dragan, Mitrovic Slobodan, Pešić Darko, Kočović Vladimir, Pantić Marko, Kokić Arsić A., Tribological investigation of ZA-27 alloy based micro/nano mixed composites, null Balkantib 20-1.pdf
|
35. Jovanović Živana, Dzunic Dragan, Milenković Strahinja, Palic Nikola, Nježić Saša, Slavkovic Vukasin, Zivic Fatima, Fabrication of Aluminum Matrix Composites for Automotive Industry via Friction Stir Processing Technique – A Review, null FABRICATION OF ALUMINUM MATRIX COMPOSITES FOR AUTOMOTIVE INDUSTRY VIA FRICTION STIR PROCESSING TECHNIQUE – A REVIEW.pdf
|
36. Ratkovic Nada, Jovanović Živana, Arsić Dušan, Pešić Miloš, Dzunic Dragan, Tool geometry effect on material flow and mixture in FSW, null Ratkovic, et al. COMETa2022.pdf
|
37. Dzunic Dragan, Petrovic Savic Suzana, Kočović Vladimir, Kostić Sonja, Djordjevic Aleksandar, Kokić Arsić A., Mitrovic Slobodan, INFLUENCE OF COUNTER BODY MATERIAL ON MATERIAL TRANSFER DURING BALL ON PLATE DRY SLIDING, null INFLUENCE OF COUNTER BODY MATERIAL ON MATERIAL TRANSFER.pdf
|
38. Djordjevic Aleksandar, Dzunic Dragan, Pantić Marko, Erić Milan, Mitrovic Slobodan, Stefanovic Miladin, SELECTION OF MACHINE LEARNING ALGORITHMS FOR NANOCOMPOSITE ZA-27 MATERIAL TRANSFER PREDICTION, null 4.SERBIATRIB.23.pdf
|
39. Petrovic Savic Suzana, Kočović Vladimir, Dzunic Dragan, Pantić Marko, Kostić Sonja, Milojević Saša, Prodanovic Tijana, SURFACE CHARACTERISATION USING IMAGE PROCESSING, null SURFACE CHARACTERISATION USING IMAGE PROCESSING.pdf
|
40. Miletic Stefan, Dzunic Dragan, Mitrovic Slobodan, Kočović Vladimir, Radisavljević Snežana, Vasiljević Saša, Kostić Sonja, TRIBOLOŠKA KARAKTERIZACIJA MOTORNIH ULJA, null ETIKUM 2023 TRIBOLOŠKA KARAKTERIZACIJA MOTORNIH ULJA.pdf
|
41. Kostić Sonja, Kočović Vladimir, Vasiljević Saša, Miletic Stefan, Jovanović Živana, Dzunic Dragan, TENSILE TESTING OF ELECTROCHEMICALLY MACHINED SPECIMENS, null ETIKUM 2023 TENSILE TESTING OF ELECTROCHEMICALLY MACHINED SPECIMENS.pdf
|
42. Mitić Predrag, Djordjevic Aleksandar, Petrovic Savic Suzana, Dzunic Dragan, Kočović Vladimir, INTEGRATED OPTIMIZATION OF TOOL PATH AND CUTTING PARAMETERS IN CONTOUR MILLING USING GENETIC ALGORITHM, null INTEGRATED OPTIMIZATION OF TOOL PATH AND CUTTING PARAMETERS IN CONTOUR MILLING USING GENETIC ALGORITHM.pdf
|
43. Dzunic Dragan, Kočović Vladimir, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić Aleksandra, Mitrovic Slobodan, INFLUENCE OF SURFACE ROUGHNESS ON MATERIAL TRANSFER OCCURRING IN ALUMINIUM DRY SLIDING APPLICATION, null SPMS 2023.pdf
|
44. Gajević Sandra, Miladinovic Slavica, Dzunic Dragan, Stojanovic Blaza, Vencl Aleksandar, A REVIEW ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF ALUMINIUM-BASED METAL MATRIX NANOCOMPOSITES, null SERBIATRIB23_Dzunic_1.pdf
|
45. Kočović Vladimir, Kostić Sonja, Dzunic Dragan, Petrovic Savic Suzana, Bijelic Ivan, Dragomir Miljanić, Vukelic Djordje, OPTIMIZATION OF THE MICRO-CUTTING PROCESS IN ORDER TO REDUCE THE SURFACE ROUGHNESS, null OPTIMIZATION OF THE MICRO-CUTTING PROCESS IN ORDER TO REDUCE.pdf
|
46. Pešić Miloš, Miljkovic Marko, Kočović Vladimir, Jovanović Pešić Ž., Jovic Nikola, Petrovic Savic Suzana, Dzunic Dragan, Temperature conditions influence on the change in the initial velocity of the 6.5mm grendel projectile, null COAST 2023 - TEMPERATURE CONDITIONS INFLUENCE ON THE CHANGE IN THE INITIAL VELOCITY OF THE 6.5 MM GRENDEL PROJECTILE.pdf
|
47. Vasiljević Saša, Kostić Sonja, Kočović Vladimir, Tanasković Aleksandra, Miletić Stefan, Džunić Dragan, STATISTICAL PROCESSING OF 3D PRINTER PRINTING TIME DATA AND ANALYSIS OF INFLUENTIAL FACTORS, null ETIKUM 2023 STATISTICAL PROCESSING OF 3D PRINTER PRINTING TIME DATA AND ANALYSIS OF INFLUENTIAL FACTORS.pdf
|
48. Dzunic Dragan, Kočović Vladimir, Petrovic Savic Suzana, Djordjevic Aleksandar, Kokić Arsić Aleksandra, Mitrovic Slobodan, INFLUENCE OF SURFACE ROUGHNESS ON MATERIAL TRANSFER OCCURRING IN ALUMINIUM DRY SLIDING APPLICATION, null INFLUENCE OF SURFACE ROUGHNESS ON MATERIAL TRANSFER OCCURRING IN ALUMINIUM DRY SLIDING APPLICATION.pdf
|
49. Kostić Sonja, Kočović Vladimir, Dzunic Dragan, Petrovic Savic Suzana, Stanojevic Milan, Djordjevic Milan, Rajkovic Dragan, TENSILE TESTING OF MATERIALS AT ELEVATED TEMPERATURES ON A SMALL LABORATORY DEVICE, null TENSILE TESTING OF MATERIALS AT ELEVATED TEMPERATURES ON A.pdf
|
50. Prodanovic Nikola, Dzunic Dragan, Kočović Vladimir, Djordjevic Aleksandar, Prodanovic Tijana, Petrovic Savic Suzana, Devedzic Goran, Application of the Random Forest Algorithm for Identifying Abnormal Patterns of Knee Joint Movement, null, 10.1109/DSPA60853.2024.10510126 SPS_et al - DSPA-2024-ENG.pdf
|
51. Devedzic Goran, Kočović Vladimir, Djordjevic Aleksandar, Jovanović Pešić Ž., Dzunic Dragan, Vukelic Djordje, Petrovic Savic Suzana, RECONSTRUCTION AND OPTIMIZATION OF COMPLEX GEOMETRIC PARTS THROUGH REVERSE ENGINEERING, null, 10.24867/MMA-2024-02-006 MMA-2024-02-006.pdf
|
52. Dzunic Dragan, Mitrovic Slobodan, Miletic Stefan, Tribological properties of different 3D printed polymer samples, null Tribological properties of different 3D printed polymer samples.pdf
|
53. Miletic Stefan, Mitrovic Slobodan, Dzunic Dragan, Radisavljević Snežana, Trifunovic Marija, Hardness measurement of ZA- 27 and A356 alloy based nanocomposites, null Hardness measurement of ZA- 27 and A356 alloy based.pdf
|
54. Mitrovic Slobodan, Dzunic Dragan, Miletic Stefan, The wear resistance of PETG polymers obtained by 3D printing, null The wear resistance of PETG polymers obtained by 3D printing.pdf
|
55. Miletic Stefan, Dzunic Dragan, Mitrovic Slobodan, Radisavljević Snežana, Trifunovic Marija, Density measurement of ZA- 27 and A356 alloy based nanocomposites using analytical balance, null Density measurement of ZA- 27 and A356 alloy based.pdf
|
56. Devedzic Goran, Kočović Vladimir, Djordjevic Aleksandar, Jovanović Živana, Dzunic Dragan, Vukelic Djordje, Petrovic Savic Suzana, RECONSTRUCTION AND OPTIMIZATION OF COMPLEX GEOMETRIC PARTS THROUGH REVERSE ENGINEERING, null GD et al.pdf
|
| |
technicalReport
|
1. Kočović Vladimir, Milovanović Vladimir, Dzunic Dragan, Miljojkovic Jasmina, Brzaković Ljiljana, Mitrovic Slobodan, Vukelic Djordje, Tadic Branko, Uređaj za određivanje kinematskog koeficijenta trenja klizanja i trenja kotrljanja statički i dinamički opterećenih kontakata, null Tehničko rešenje M82 - Uređaj za određivanje kinematskog koeficijenta trenja statički i dinamički opterećenih kontakata.pdf
|
