| |
article
|
1. Lazic Vukic, Sedmak Aleksandar, Krstic Bozidar, Nikolic Ruzica, Aleksandrovic Srbislav, Rajko Čukic, DETERMINATION OF THE COOLING RATE AND ITS INFLUENCE ON THE HARD-FACED FORGING DIES PROPERTIES, null (ISSN 1335-0803) 93-Mat i nz 2009-124-131.pdf
|
2. Aleksandrovic Srbislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, VARIATION OF NORMAL ANISOTROPY RATIO "r" DURING THE PLASTIC FORMING, null (ISSN 0039-2480) 92_Aleksandrovic_2009__p392_399.pdf
|
3. Branislav Nedeljkovic, Lazic Vukic, Krstic Bozidar, Milosavljevic Dragan, Aleksandrovic Srbislav, Rajko Čukic, REPARATURA NAVARIVANJEM RAZLIČITIH DELOVA MAŠINSKIH SISTEMA, null (ISSN 0456-2933) 95-Livar 2009-16-29.pdf
|
4. Lazic Vukic, Sedmak Aleksandar, Aleksandrovic Srbislav, Milosavljevic Dragan, Rajko Čukic, Grabulov Vencislav, REPARATION OF THE DAMAGED FORGING HAMMER MALLET BY HARD FACING AND WELD CLADDING, null (ISSN 1330-3651) 94 -V Lazic - Tehn vjesnik HR - tv_16_2009_4_107_113.pdf
|
5. Aleksandrovic Srbislav, Branislav Nedeljkovic, Stefanovic Milentije, Milosavljevic Dragan, Lazic Vukic, TRIBOLOGICAL PROPERTIES OF STEEL AND AL-ALLOYS SHEET METALS INTENDED FOR DEEP DRAWING, null (ISSN 0354-8996) 96--S_Aleks et al-2009-Trib in ind 31-3_4 pp 11-16.pdf
|
6. Branislav Nedeljkovic, Babic Miroslav, Milan Mutavdzic, Ratkovic Nada, Aleksandrovic Srbislav, Nikolic Ruzica, Lazic Vukic, REPARATORY HARD FACING OF THE ROTATIONAL DEVICE KNIVES FOR TERRAIN LEVELLING, null (ISSN 1310-4772) 100-B Nedeljk - J of Balk Trib Ass 2010- 46-57.pdf
|
7. Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Marinkovic Petar, Bogdanovic Gordana, Branislav Nedeljkovic, Tribological Investigations of Hard-Faced Layers and Base Materials of Forging Dies with Different Kinds of Lubricants Applied, null (ISSN 0354-8996) 111-Trib in ind - V Laz - 2010 - 36-44.pdf
|
8. Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Marinkovic Petar, Bogdanovic Gordana, Branislav Nedeljkovic, Carbide Type Influence on Tribological Properties of Hard Faced Steel Layer – Part II – Experimental Results, null (ISSN 0354-8996) 110-Fin_V_Laz et al - Trib in industry - 2010 - article part II.pdf
|
9. Branislav Nedeljkovic, Lazic Vukic, Aleksandrovic Srbislav, Krstic Bozidar, Milan Mutavdzic, Milosavljevic Dragan, Djordjevic Milan, INFLUENCE OF THE CARBIDE TYPE ON TRIBOLOGICAL PROPERTIES OF THE HARD-FACED LAYERS, null (ISSN 0354-6306) 105-B Nedeljk_MJoM_16(2) 2010 p_77-90.pdf
|
10. Lazic Vukic, Sedmak Aleksandar, Zivkovic Miroslav, Aleksandrovic Srbislav, Čukić Rajko, Jovicic Radomir, Ivanović Ivana, Theoretical-experimental determining of cooling time (t8/5) in hard facing of steels for forging dies, null, 10.2298/TSCI1001235L (ISSN 0354-9836) 0354-98361001235L.pdf
|
11. Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Marinkovic Petar, Bogdanovic Gordana, Branislav Nedeljkovic, Carbide Type Influence on Tribological Properties of Hard Faced Steel Layer – Part I – Theoretical Considerations, null (ISSN 0354-8996) 109-Fin_V_Laz et al - Trib in industry 2010 - article part I.pdf
|
12. Lazic Vukic, Jovanovic Milorad, Sedmak Aleksandar, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstić Božidar, Čukić Rajko, Eenergetic analysis of hard facing and weld cladding of an air powered drop hammer damaged ram, null, 10.2298/TSCI100501021L (ISSN 0354-9836) 0354-98361000021L.pdf
|
13. Krstić Božidar, Babic Milun, Lazic Vukic, Raiĉević Vladimir, Despotovic Milan, Milosavljevic Dragan, Krstić Vojislav, Determination analysis of temperature regimes, functional characteristics and sliding curves of a hydrodynamic clutch, null, 10.2298/TSCI100412019K (ISSN 0354-9836) 0354-98361000019K.pdf
|
14. Lazic Vukic, Milan Mutavdzic, Milosavljevic Dragan, Aleksandrovic Srbislav, Branislav Nedeljkovic, Marinkovic Petar, Rajko Čukic, Selection of the most appropriate technology of reparatory hard facing of working parts on universal construction machinery, null (ISSN 0354-8996) 129--Trib in ind-33-1-2011-18-27.pdf
|
15. Aleksandrovic Srbislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, Babic Miroslav, Nikolic Ruzica, VUJINOVIĆ Tomislav, VARIABLE TRIBOLOGICAL CONDITIONS ON THE FLANGE AND NONMONOTONOUS FORMING IN DEEP DRAWING OF COATED SHEETS, null (ISSN 1310-4772) 112--J of the Balk Trib As-17 -2-165-178 - 2011.pdf
|
16. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Design aspects at mechanical constructions made of high strength steel grades, null (ISSN 1821-1259) Machine Design 131-138.pdf
|
17. Lazic Vukic, Sedmak Aleksandar, Milosavljevic Dragan, Nikolic Ilija, Aleksandrovic Srbislav, Nikolic Ruzica, Milan Mutavdzic, THEORETICAL AND EXPERIMENTAL ESTIMATION OF THE WORKING LIFE OF MACHINE PARTS HARD FACED WITH AUSTENITE - MANGANESE ELECTRODES, null (ISSN 1580-2949) Mat in tehn - 46-5-2012 -547-554-c.pdf
|
18. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Design of the motor vehicles from the aspect of high strength steels applications, null (ISSN 1450-5304) MVM_Ilic_Ivanovic_Josifovic_Lazic_Paper.pdf
|
19. Milan Mutavdzic, Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Nikolic Ruzica, Rajko Čukic, Bogdanovic Gordana, Determination of the optimal tempering temperature in hard facing of the forging dies, null (ISSN 1335-0803) Mat inz -2012 - 95-103.pdf
|
20. Djordjevic Milan, Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Nikolic Ruzica, Computer Controlled Experimental Device for Investigations of Tribological Influences in Sheet Metal Forming, null (ISSN 1335-0803) Mat inz - Zilina --2012-88-94.pdf
|
21. Aleksandrovic Srbislav, Babic Miroslav, Branislav Nedeljkovic, VUJINOVIĆ Tomislav, Taranović Dragan, Lazic Vukic, Milosavljevic Dragan, VARIABLE DRAWBEAD HEIGHT AND VARIABLE CONTACT PRESSURE AS TRIBOLOGICAL INFLUENCES IN SHEET METAL STRIPE SLIDING TEST, null (ISSN 1310-4772) J of Balk Trib Asoc 2012 -- 184-194.pdf
|
22. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Adamovic Dragan, Lazic Vukic, Taranović Dragan, Variable Contact Pressure and Variable Drawbead Height Influence on Deep Drawing of Al Alloys Sheets, null (ISSN 0562-1887) STROJARSTVO-2012-109-115.pdf
|
23. Lazic Vukic, Aleksandrovic Srbislav, Mitrovic Slobodan, Nikolic Ruzica, Milosavljevic Dragan, Čukić R., Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry, null (ISSN 0354-8996) 2.6.pdf
|
24. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Djordjevic Milan, Milosavljevic Dragan, Defining of pressure and drawbead height functions in sheet metal stripe tensile test over drawbead with variable parameters, null DEMI 2013 -Proc-397-402.pdf
|
25. Lazic Vukic, Rajko Čukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Nikolic Ruzica, Krstic Bozidar, Branislav Nedeljkovic, Techno-economic justification for reparatory hard-facing of machine systems working parts, null SERBIATRIB 2013 - 281-285.pdf
|
26. Arsić Miodrag, Lazic Vukic, Arsić Dušan, Savić Zoran, Šarkoćević Živče, Effect of enhanced mechanical properties of weld metal and heat affected zone on the strength of the welded joint, null (ISSN 0354-8651) Casopis-ENERGIJA, No. 1-2, 2013, M. Arsic et al..pdf
|
27. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinkovic Petar, Djordjevic Milan, Rajko Čukic, Application of the S690QL class steels in responsible welded structures, null (ISSN 1335-0803) 110-795-1-PB D.A. et. al, final (printed).pdf
|
28. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Stefanovic Milentije, Nikolic Ruzica, Arsić Dušan, Experimental analysis of influence of different lubricants types on the multi-phase ironing process, null (ISSN 1335-0803) Experimental analysis of influence ....pdf
|
29. Aleksandrovic Srbislav, Milan Djordjevic, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Arsić Dušan, Different Ways of Friction Coefficient Determination in Stripe Ironing Test, null (ISSN 0354-8996) S. Aleksandrovic et al. Trib in Ind 2014.pdf
|
30. Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Aleksandrovic Srbislav, Arsić Dušan, Djordjevic Milan, Experimental measurements of residual stresses in welding of steels operating at high temperatures, null Paper 2 Zvaranie.pdf
|
31. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Aleksandrovic Srbislav, Djordjevic Milan, Weldability estimates of some high strength steels, null Paper 1 Zvaranie.pdf
|
32. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Marinković Petar, Djordjevic Milan, Ratkovic Nada, THEORETICAL-EXPERIMENTAL FRACTURE ANALYSIS OF A RESPONSIBLE MACHINE PART, null (ISSN 1451-3749) 141-146-IVK2-2014-DA-VL-SA-RN-PM-MD-NR.pdf
|
33. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstic Bozidar, Marinkovic Petar, Djordjevic Milan, Application of high strength steels to responsible welded structures on motor vehicles, null (ISSN 1450-5304) Arsic_et_all_paper.pdf
|
34. Lazic Vukic, Rajko Čukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Arsić Dušan, Branislav Nedeljkovic, Djordjevic Milan, Techno-economic justification of reparatory hard facing of various working parts of mechanical systems, null (ISSN 0354-8996) 7. V. Lazic et al. Tribology in Industry 2014.pdf
|
35. Lazic Vukic, Ivanović I., Sedmak Aleksandar, Rudolf R., Lazić Mirjana, Radaković Z., Numerical analysis of temperature field during hardfacing process and comparison with experimental results, null, 10.2298/TSCI130117177L (ISSN 0354-9836) 0354-98361300177L.pdf
|
36. Arsić Dušan, Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Analysis of the austenitic stainless steel's r-value behavior at elevated temperatures, null (ISSN 1335-0803) Mat inz 22-2-2015-66-76.pdf
|
37. Arsić Dušan, Lazic Vukic, Samardžić I., Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Impact of the hard facing technology and the filler metal on tribological characteristics of the hard faced forging dies, null, 10.17559/TV-20150408152638 (ISSN 1330-3651) 10.17559-TV-20150408152638.pdf
|
38. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Milosavljevic Dragan, Djordjevic Milan, Rajko Čukic, Reparation of damaged forging dies by hard facing (HF) technology, null (ISSN 2353-5156) Prod Eng Arch-6-1-2015-26-29.pdf
|
39. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Mutavdzic Milan, Experimental determination of mechanical characteristics of four types of stones and their influence on the construction machinery parts wear, null, 10.4028/www.scientific.net/AMR.1100.178 (ISSN 1662-8985) AMR.1100.178.pdf
|
40. Lazic Vukic, Sedmak Aleksandar, Nikolic Ruzica, Milan Mutavdzic, Aleksandrovic Srbislav, Krstic Bozidar, Milosavljevic Dragan, SELECTION OF THE MOST APPROPRIATE WELDING TECHNOLOGY FOR HARDFACING OF BUCKET TEETH, null (ISSN 1580-2949) Mat in tehn - LJublj_br 1 - 2015-165-172.pdf
|
41. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Hadzima Branislav, Djordjevic Milan, Optimal welding technology of high strength steel S690QL, null (ISSN 1335-0803) Mat inz 22-1-2015-33-47.pdf
|
42. Lazic Vukic, Sedmak Aleksandar, Samardžić I., Aleksandrovic Srbislav, Arsić Dušan, Milosavljevic Dragan, Djordjevic Milan, Shear strength testing of hardfaced samples using special tool on an universal testing machine, null (ISSN 1451-3749) Struct int and life- 15-1-2015 -15-18.pdf
|
43. Milosavljevic D., Bogdanovic G., Lazic Vukic, Aleksandrovic Srbislav, Lazić Mirjana, Bulk waves and dynamical behaviour in elastic solids reinforced by two families of strong fibres, null, 10.1007/s10665-014-9747-9 (ISSN 0022-0833)
|
44. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Milan Mutavdzic, Aleksandrovic Srbislav, Djordjevic Milan, Wear resistance of layers hard faced by the high-alloyed filler metal, null (ISSN 1335-0803) @Mat inz 20-3-2016-90-97.pdf
|
45. Lazic Vukic, Aleksandrovic Srbislav, Arsić Dušan, Sedmak Aleksandar, Ilic Andreja, Đorđević Milan, Ivanović Lozica, The influence of temperature on mechanical properties of the base material (BM) and welded joint (WJ) made of steel S690QL, null (ISSN 0543-5846) MET_55_2_213_216.pdf
|
46. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Milan Mutavdzic, Mesko J., Reparation by hard facing of the damaged secondary stone crushers, null (ISSN 1213-2489) manufacturing_spolupráca článok 1 - rad scan.pdf
|
47. Arsić Dušan, Zahar Djordjevic Marija, Živković Jelena, sedmak aleksandar, Aleksandrovic Srbislav, Lazic Vukic, Rakić Dragan, Experimental-numerical study of tensile strength of the high-strength steel S690QL at elevated temperatures, null, 10.1007/s11223-016-9812-x (ISSN 0039-2316) 10.1007-s11223-016-9812-x.pdf
|
48. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Milan Mutavdzic, Hadzima Branislav, Revitalization of the damaged machine parts by hard facing as a way of saving funds, null (ISSN 2353-5156) Vol. 12, No 3 - 03. V. Lazić, D. Arsić, R. Nikolić, M. Mutavžić, B. Hadzima.pdf
|
49. Ratkovic N., Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Mesko J., Nigrovic R., Influence of the Friction Time on the Shape and Microstructure of the Mixing Zone of the Friction Welded Joint, null, 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1355 (ISSN 1213-2489) 10.21062-ujep-x.2016-a-1213-2489-MT-16-6-1355.pdf
|
50. Arsić Dušan, Lazic Vukic, Mitrovic Slobodan, Dzunic Dragan, Aleksandrovic Srbislav, Djordjevic Milan, Nedeljković B., Tribological behavior of four types of filler metals for hard facing under dry conditions, null, 10.1108/ILT-10-2015-0156 (ISSN 0036-8792)
|
51. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, The contact and compacting pressures influences on the plastic deformation parameters of the friction welded joint, null (ISSN 1335-0803) 192-1626-1-PB-printed.pdf
|
52. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Estimate of weldability of the hot work tool steels via the CCT diagrams, null (ISSN 2344-2409) 1- Arsic D.- Lazic V. - Nikolic R.- Hadzima B..pdf
|
53. Nigrovic R., Mesko J., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Influence of chemical composition of selected materials on the roughness on cutting edge and the width of HAZ, null (ISSN 1213-2489) Nigrovich et al_Manufacturing Technology.pdf
|
54. Djordjevic Milan, Aleksandrovic Srbislav, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, The variable contact pressure influence on the tensile force in the process of strip sliding in the flat die in ironing, null (ISSN 1335-0803) @Mat inz 23-2-2016-74-83.pdf
|
55. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels, null, 10.1016/j.proeng.2016.08.139 (ISSN 1877-7058) VL PROENG printed.pdf
|
56. Djordjevic Milan, Aleksandrovic Srbislav, Arsić Dušan, Lazic Vukic, Milosavljevic Dragan, Nikolic Ruzica, COMPARATIVE STUDY OF AN ENVIRONMENTALLY FRIENDLY LUBRICANT WITH CONVENTIONAL LUBRICANTS IN STRIP IRONING TEST, null (ISSN 1310-4772) @J of Balk Trib Ass -1A-II 2016-947-958-c.pdf
|
57. Djordjevic Milan, Mandic Vesna, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Gulišija Z., Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process, null, 10.1108/ILT-05-2016-0113 (ISSN 0036-8792)
|
58. Lazic Vukic, Arsić Dušan, M. Zrilic, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, Experimental measuring of residual stresses in hard faced layers of the hot work tool steel, null (ISSN 0354-7965) Zavariv i zav kons-2017-19-26.pdf
|
59. Lazic Vukic, Arsić Dušan, Zrilic Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, EXPERIMENTAL MEASURING OF RESIDUAL STRESSES IN HARD FACED LAYERS OF THE HOT WORK TOOL STEEL, null (ISSN 0354-7965) 0354-79651701019L.pdf
|
60. Ratkovic N., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Palcek P., sedmak aleksandar, influence of friction welding parameters on properties of the Al-Cu joint, null, 10.5937/fmet1701165R (ISSN 1451-2092) 10.5937-fmet1701165R.pdf
|
61. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Hadzima Branislav, Welding of the tube girder cover made of the C-Mn steel, null (ISSN 1335-0803) MEMI -SK- 2017-26-35.pdf
|
62. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Arsić Miodrag, Hadzima Branislav, Selecting the low alloy-tempered steel for manufacturing the highly loaded responsible parts, null (ISSN 1335-4205) V. LAZIC et al._SELECTING THE LOW ALLOY-TEMPERED STEEL FOR MANUFACTURING THE HIGHLY LOADED RESPONSIBLE PARTS.pdf
|
63. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Djordjevic D., Prokic-Cvetkovic R., Popović O., Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry, null, 10.4028/www.scientific.net/KEM.755.96 (ISSN 1013-9826)
|
64. Nigrovic R., Mesko J., Nikolic Ruzica, Lazic Vukic, Arsić Dušan, Hadzima Branislav, Comparison of the PMMA mechanical properties after cutting by the laser beam and milling, null, 10.5937/fmet1801057N (ISSN 1451-2092) 10.5937-fmet1801057N.pdf
|
65. Aleksandrovic Srbislav, Djačić S., Stefanovic Milentije, Djordjevic Milan, Arsić Dušan, Lazic Vukic, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, null (ISSN 2067-3809) ACTA Rum_2018-29-33.pdf
|
66. Ivanović Lozica, Vesna Marjanović, Ilic A., Stojanovic Blaza, Lazic Vukic, Correlations of mechanical properties and microstructure at specific zones of welded joint of high-strength low-alloy steels, null, 10.24425/118939 (ISSN 1733-3490)
|
67. Ratkovic N., Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Prokic-Cvetkovic R., Popović O., Microstructure in the joining zone during the friction welding of the two dissimilar steels, null, 10.1108/ILT-08-2017-0234 (ISSN 0036-8792)
|
68. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, null, 10.1016/j.trpro.2019.07.060 (ISSN 2352-1465) 1-s2.0-S2352146519302236-main.pdf
|
69. Đorđević M., Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Todic A., Patarić A., THE POSSIBILITIES FOR APPLICATION OF NUMERICAL SIMULATION IN THE IRONING PROCESS OF THIN SHEETS, null, 10.24874/PES01.01.052 (ISSN 2620-2832)
|
70. Zivkovic Miroslav, Vukovic M., Lazic Vukic, Milovanović Vladimir, Dunić Vladimir, Kozak D., Rakić Dragan, Experimental and FE modeling investigation of spot welded thin steel sheets, null, 10.17559/TV-20190113163316 (ISSN 1330-3651) 10.17559-TV-20190113163316.pdf
|
71. Djordjevic Milan, Aleksandrovic Srbislav, Djačić S., sedmak aleksandar, Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Simulation of flat die deep drawing process by variable contact pressure sliding model, null, 10.17559/TV-20161215205553 (ISSN 1330-3651) 10.17559-TV-20161215205553.pdf
|
72. Aleksandrovic Srbislav, Đačić S., Đorđević M., Lazic Vukic, Arsić Dušan, DETERMINATION OF CORRECTED PARAMETERS IN STRIP IRONING PROCESS WITH DOUBLE SIDE THINNING, null, 10.24874/PES01.01.058 (ISSN 2620-2832)
|
73. Arsić Dušan, Lazic Vukic, Dzunic Dragan, Aleksandrovic Srbislav, Đorđević M., Uhríčik Milan, Arsić Aleksandra, WEAR RESISTANCE UNDER DRY CONDITIONS OF DIFFERENT FILLER METALS USED FOR HARD FACING, null, 10.24874/PES01.01.055 (ISSN 2620-2832)
|
74. Arsić Dušan, Lazic Vukic, sedmak aleksandar, Aleksandrovic Srbislav, Živković Jelena, Djordjevic Milan, Mladenović G., Effect of elevated temperatures on mechanical properties of ultra high strength hot work tool steel H11, null, 10.21278/TOF.44207 (ISSN 1333-1124) 10.21278-TOF.44207.pdf
|
75. sedmak aleksandar, Arsić M., Sarkocevic Z., Medjo Bojan, Rakin M., Arsić Dušan, Lazic Vukic, Remaining strength of API J55 steel casing pipes damaged by corrosion, null, 10.1016/j.ijpvp.2020.104230 (ISSN 0308-0161)
|
76. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Hadzima Branislav, Analysis of certain physical properties of four rock materials, null, 10.18485/aeletters.2020.5.4.1 (ISSN 2466-4677) 10.18485-aeletters.2020.5.4.1.pdf
|
77. Aleksandrovic Srbislav, Đačić S., Đorđević M., Ratkovic N., Arsić Dušan, Lazic Vukic, New method of defining of process parameters in double side thinning strip ironing test, null, 10.24874/ti.2020.42.01.06 (ISSN 0354-8996) 10.24874-ti.2020.42.01.06.pdf
|
78. Djačić S., Aleksandrovic Srbislav, Arsić Dušan, Delić Marko, Lazic Vukic, Ironing process in conditions of constant and variable lateral force, null, 10.24867/ATM-2021-2-001 (ISSN 2620-147X) ATM-2021-2-1-5.pdf
|
79. Markovic Nina, Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Ratkovic N., Hadzima Branislav, Szmidla Janusz, Ulewicz Robert, Analysis of the welding type and filler metal influence on performance of a regenerated gear, null, 10.3390/ma14061496 10.3390-ma14061496.pdf
|
80. Nikolic Ruzica, Marković Svetislav, Arsić Dušan, Lazic Vukic, Hadzima Branislav, Ulewicz Robert, Influence of different hard-facing procedures on quality of surfaces of regenerated gears, null, 10.30657/pea.2021.27.34 (ISSN 2353-5156)
|
81. Miloševič N., sedmak aleksandar, Bakic´ G., Lazic Vukic, Milosevic Milos, Mladenović G., Maslarević A., Determination of the actual stress–strain diagram for undermatching welded joint using dic and fem, null, 10.3390/ma14164691 10.3390-ma14164691.pdf
|
82. Marković R., Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Milovanović Vladimir, Dwornicka Renata, Ulewicz Robert, Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures, null, 10.3390/ma14154203 10.3390-ma14154203.pdf
|
83. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Aleksandrovic Srbislav, Radovic Ljubica, Ilić Nada, Hadzima Branislav, An Example of Reparatory Surface Welding of the Mining Machine Vital Part, null, 10.26552/com.C.2021.1.B39-B45 (ISSN 1335-4205) Comun 2021 - B39-B45.pdf
|
84. Ilic Marjan, Ivković D., Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Arsić Miodrag, TEORIJSKO-EKSPERIMENTANA OCENA ZAVARLJIVOSTI RAZNIH TIPOVA NAVARENIH ČELIKA, null, 10.5937/zzk2203101I (ISSN 0354-7965) Zav i zav konstr 2022 -101-113.pdf
|
85. Todic A., Djordjevic Milan, Arsić Dušan, Dzunic Dragan, Lazic Vukic, Aleksandrovic Srbislav, Krstić B., INFLUENCE OF VANADIUM CONTENT ON THE TRIBOLOGICAL BEHAVIOUR OF X140CrMol2-l AIR-HARDENING STEEL, null, 10.21278/TOF.462035021 (ISSN 1333-1124) 10.21278-TOF.462035021.pdf
|
86. Marković Svetislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Ivković D., Ulewicz Robert, Bokůvka Otakar, Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions, null, 10.3390/ma15217795 (ISSN -)
|
87. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Sczygiol Norbert, Krstic Bozidar, Ivković D., Hadzima Branislav, Pastorek Filip, Ulewicz Robert, Weldability Assessment of Various Steels by Hard-Facing, null, 10.3390/ma15093082 (ISSN 1996-1944)
|
88. Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Djordjevic Milan, Delić Marko, Application of welding for the production of ballistic protective structures, null (ISSN 2067-3809) ACTA-Rumun 2022-4-04.pdf
|
89. Nikolic Ruzica, Ivkovic Djordje, Arsić Dušan, Lazic Vukic, Jackova Martina, The possibility of replacing low-carbon construction steels with high strength steels in the production of welded structures, null, Zvaranie (ISSN 0044-5525) Zvaranie Journal_Nikolic et. al_2024.pdf
|
| |
book
|
1. Lazic Vukic, Arsić Dušan, Regeneracija površina, null
|
| |
bookPart
|
1. Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Milosavljevic Dragan, Rajko Čukic, Arsić Dušan, Djordjevic Milan, Application of hard-facing in reparation of damaged forging dies, null V. Lazic et al. - Colloquium Poland 2014.pdf
|
| |
review
|
1. Čabrilo Aleksandar, Geric Katarina, Jovanovic M., Lazic Vukic, Weldability and Impact Energy Properties of High-Hardness Armor Steel, null, 10.1007/s11665-018-3211-3 (ISSN 1059-9495)
|
| |
conferenceObject
|
1. Lazic Vukic, Vukovic Marina, Vaskovic Jovanovic Mina, Aleksandrovic Srbislav, Zivkovic Miroslav, Definisanje parametara tačkastog zavarivanja pri izradi odgovornih sklopova automobila, null 84 - SPM 2008 _ 271-275 .pdf
|
2. Lazic Vukic, Vukovic Marina, Jovanovic Milorad, Aleksandrovic Srbislav, Vulovic Radun, QUALITY EVALUATION OF SPOT WELDED JOINT BY BOTH STANDARD AND NEW METHODS OF CONTROL WITH DESTRUCTION – part 1, null 86--Zavar 2008.pdf
|
3. Lazic Vukic, Vukovic Marina, Jovanovic Milorad, Zivkovic Miroslav, Aleksandrovic Srbislav, EXPERIMENTAL-NUMERICAL DETERMINATION OF BEST TECHNOLOGY OF SPOTED WELDINGS OF RELIABLE AUTOMOTIVE ASSEMBLIES – part 2, null 87--Zavar 2008.pdf
|
4. Lazic Vukic, Jovanovic Marina, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Srbislav, Rajko Čukic, Milosavljevic Dragan, Teorijsko-eksperimentalna procena radnog veka navarenih slojeva izvedenih austenitnim manganskim elektrodama, null 107-V Laz--ZELKON 2010 317-320.pdf
|
5. Milosavljevic Dragan, Marinkovic Petar, Lazic Vukic, Aleksandrovic Srbislav, Ratkovic Nada, Ocena zavarljivosti čelika povišene jačine i mogućnost njihove primene u železničkoj industriji, null 108-Zelkon Nis 2010 - 309-312.pdf
|
6. Jovanovic Milorad, Lazic Vukic, Marinkovic Petar, Branislav Nedeljkovic, Aleksandrovic Srbislav, Milosavljevic Dragan, ESTIMATES OF WELDABILITY AND SELECTION OF THE OPTIMAL PROCEDURE AND TECHNOLOGYFOR WELDING OF HIGH STRENTH STEEL WELDOX 700, null 55--Zavar 2010.pdf
|
7. Lazic Vukic, Jovanovic Milorad, Nikolic Ruzica, Aleksandrovic Srbislav, Krstic Bozidar, Mutavdzic Milan, THEORETICAL-EXPERIMENTAL DETERMINATION OF THE COOLING RATE AND ITS INFLUENCE ON PROPERTIES OF THE HARD-FACED FORGING DIES, null 54--Zavar 2010.pdf
|
8. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Djačić Slaviša, Adjustable drawbead and variable contact pressure as tribological influences in sheet metal stripe sliding test, null 126-ICMEN_2011 - 597-605.pdf
|
9. Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Rajko Čukic, Krstic Bozidar, Bogdanovic Gordana, Selection of the welding technology of reliable assemblies using GMAW process, null 124-ICPE 2011 -473-476+info.pdf
|
10. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, null 116-SERBIATRIB 2011 - 358-365.pdf
|
11. Ilic Andreja, Josifović Danica, Lazic Vukic, Ivanović Lozica, Mechanical Properties of Welded Joints at Steel Tubes with Square Cross Section, null Proizvodno masinstvo 2011.pdf
|
12. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Variable contact pressure and variable drawbead height influence on deep drawing of Al alloys sheets, null 120-ICPE 2011 - 277-280.pdf
|
13. Lazic Vukic, Milan Mutavdzic, Milosavljevic Dragan, Aleksandrovic Srbislav, Branislav Nedeljkovic, Marinkovic Petar, Rajko Čukic, Selection of the Most Appropriate Technology of Reparatory Hardfacing of working Parts on Universal Construction Machinery, null 117-SERBIATRIB 2011 - 240-249.pdf
|
14. Ilic Andreja, Josifović Danica, Lazic Vukic, Ivanović Lozica, Еxperimental determination of stress concentration influence on welded constructions stability, null IRMES 2011-Andreja.pdf
|
15. Lazic Vukic, Milosavljevic Dragan, Aleksandrovic Srbislav, Rajko Čukic, Krstic Bozidar, Bogdanovic Gordana, Determination of optimum tempering temperature in hard facing of the forging dies for working at elevated temperatures, null 123-ICPE 2011 -469-472.pdf
|
16. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Computer controlled experimental device for investigations of tribological influences in sheet metal forming, null 113- DEMI-2011-285-290.pdf
|
17. Nikolic Ruzica, Krstic Bozidar, Lazic Vukic, Nikolic I., Aleksandrovic Srbislav, Krstić I., Krstić V., Determination and analysis of influence of the hydrodynamic, kinematic and geometric parameters on the motor vehicles hydrodynamic clutch characteristics, null, 10.1016/j.proeng.2012.07.101 (ISSN 1877-7058)
|
18. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Application of High-Strength Steels in Vehicle Design, null 05_IlicA_IAT2012_Paper.pdf
|
19. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, DESIGN OF THE MOTOR VEHICLES FROM THE ASPECT OF HIGH STRENGTH STEELS APPLICATIONS, null MVM2012 Ilic.pdf
|
20. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Advantages of High Strength Steels Applications in Mechanical Constructions, null Ilic-KOD2012.pdf
|
21. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, The methodology aspects for monitoring the machine elements, null 75-Ilic COMETa 2012.pdf
|
22. Nikolic D., Nikolic Ruzica, Krstic Bozidar, Lazic Vukic, Nikolic I., Krstić I., Krstić V., Optimization of technical diagnostics procedures for hydroelectric power plants, null, 10.1016/j.proeng.2012.07.102 (ISSN 1877-7058)
|
23. Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Prokic-Cvetkovic R., Popović O., Milosavljevic Dragan, Čukić R., Estimates of weldability and selection of the optimal procedure and technology for welding of high strength steels, null, 10.1016/j.proeng.2012.07.100 (ISSN 1877-7058)
|
24. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Stefanovic Milentije, Nikolic Ruzica, Arsić Dušan, Influence of lubricants on the multiphase ironing process, null Semdok paper 2.pdf
|
25. Ilic Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Rakić Boris, TESTING OF ELEMENTS AND JOINTS AT MECHANICAL CONSTRUCTIONS, null 25 TESTING OF ELEMENTS AND JOINTS AT MECHANICAL CONSTRUCTIONS.pdf
|
26. Ivanović I., sedmak aleksandar, Lazic Vukic, Numerical analysis of thermal conditions for planning and further improvements of hard surfacing experiment, null, 10.1063/1.4826028 (ISSN 0094-243X)
|
27. Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Marinkovic Petar, Arsić Dušan, Djordjevic Milan, Krstic Bozidar, Determination and analysis of causes for a catastrophic failure of a responsible machine part, null Degradacija materijala.pdf
|
28. Ivanović Lozica, Josifović Danica, Ilic Andreja, Lazic Vukic, ECOLOGYCAL ASPECTS OF HIGH STRENGTH LOW ALLOYED STEELS AT MECHANICAL CONSTRUCTIONS, null 56 IQC 2013.pdf
|
29. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinković Petar, Djordjevic Milan, Application of high strength steel of the S690QL class for application to welded structures, null Semdok 2013 paper.pdf
|
30. Aleksandrovic Srbislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Djordjevic Milan, Arsić Dušan, Different ways of friction coefficient determination in stripe ironing test, null proceedings_paper.pdf
|
31. Ilić Andreja, Ivanović Lozica, Josifović Danica, Lazic Vukic, Nikolic Ruzica, Influence of Stress Concentration on Mechanical Properties of High Strength Low Alloyed Steel Grade, null SEMDOK-2013.pdf
|
32. Lazic Vukic, Mutavdzic Milan, Nikolic Ruzica, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstic Bozidar, Rajko Čukic, Influence of various type of rock aggregates on selection of the working parts material in civil engineering, null SERBIATRIB 2013 - 275-280.pdf
|
33. Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Arsić Dušan, Djordjevic Milan, Milan Mutavdzic, Selection of the optimal reparation technology for working parts subjected to abrasive wear, null Paper Transcom 2013.pdf
|
34. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstic Bozidar, Marinkovic Petar, Djordjevic Milan, Application of high strength steels to responsible welded structures on motor vehicles, null MVM2014_paper.pdf
|
35. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinković Petar, Djordjevic Milan, Rajko Čukic, Optimalan metod i tehnologija zavarivanja čelika povišene jačine S690QL, null Zavarivanje 2014.pdf
|
36. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Djordjevic Milan, Arsić Dušan, Influence of variable drawbead height and variable contact pressure in Al alloy sheet strip drawing process, null ICMEN 2014 Greece_scaned paper.pdf
|
37. Arsić Dušan, Milan Djordjevic, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Selecting the optimal welding technology of high strength steel of the S690QL class, null Semdok 2014.pdf
|
38. Ilic Andreja, Ivanović Lozica, Rakić Boris, Josifović Danica, Lazic Vukic, Influence of welding technology to mechanical properties of welding joints at high strength low alloy steels, null ilic KOD 2014.pdf
|
39. Arsić Dušan, Lazic Vukic, Ilic Andreja, Ivanović Lozica, Aleksandrovic Srbislav, Djordjevic Milan, Dependence of mechanical properties of the base metal and welded joint of the high strength steel S690QL on elevated temperatures, null HM paper-printed.pdf
|
40. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Optimization of welding of the truck's rear axle semi-housing, null Transcom 2015 -ceo.pdf
|
41. Ratkovic Nada, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Influence of the welding time on plastic deformation during the friction welding of the high-speed steel and steel for tempering, null Paper 2 Zvaranie 2015.pdf
|
42. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Samardzic Ivan, Hadzima Branislav, Tehnologija reparaturnog navarivanja noževa pluga za čišćenje snega, null SBZ 2015_Paper_Scan.pdf
|
43. Arsić Dušan, Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Variation of the normal anisotropy coefficient of austenitic stainless steel at elevated temperatures, null SEMDOK_2015_scan.pdf
|
44. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Hadzima Branislav, Reparation of the fractured mandrel axle-shaft by welding, null, 10.1201/b19249 M33 - Adv trends-2016-9-14.pdf
|
45. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Koteš Peter, Investigation of the lubricants influence on the ironing process, null, 10.1016/j.proeng.2015.07.069
|
46. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Bujnak Jan, Wear behavior of two different Cr based alloys for surfacing of steel parts, null AKTIV_Paper_D. Arsic et. al.pdf
|
47. Arsić Dušan, Lazic Vukic, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Marko, Mitrovic Slobodan, Djordjevic Milan, Experimental investigation of wear resistance of models hard faced with various filler metals, null Serbiatrib15 170-175.pdf
|
48. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Samardžić I., Hadzima Branislav, Tehnologija reparaturnog navarivanja noževa pluga za čišćenje snega, null Slav Brod 2015 - M63.pdf
|
49. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Hadzima Branislav, Ratkovic Nada, Profitability analysis of reparation of the construction machinery damaged parts – how to save money, null Paper 1 Zvaranie 2015.pdf
|
50. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Bujnak Jan, Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures, null, 10.1016/j.proeng.2015.07.122 1-s2.0-S1877705815013715-main.pdf
|
51. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Vičan J., Influence of tempering on the deformation level of the multi-layer hard faced samples, null, 10.1016/j.proeng.2015.07.034
|
52. Lazic Vukic, Arsić Dušan, Djordjevic Milan, Nikolic Ruzica, Hadzima Branislav, Joining of copper alloys and low-carbon steels by electrical resistance spot brazing, null ESaT2015_1105_Lazic et al_1.pdf
|
53. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Sedmak Aleksandar, Influence of friction welding parameters on mechanical properties and microstructure of the Al-Cu joint, null TEAM 2015_N. Ratkovic et. al_ISBN and paper.pdf
|
54. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Stefanovic Milentije, Milosavljevic Dragan, Two-phase ironing process in conditions of ecologic and classic lubricants application, null SERBIATRIB 2015-407-413.pdf
|
55. Lazic Vukic, Arsić Dušan, Zrilic Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, Eksperimentalno merenje zaostalih napona u navаrenim slojevima kod termopostojanog čelika, null Zavarivanje 2016 (2).pdf
|
56. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Weldability estimation of steels for hot work by the CCT diagrams, null b19249-4 - D. Arsic et. al.pdf
|
57. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Rakić Dragan, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Selection and analysis of material for boiler pipes in a steam plant, null, 10.1016/j.proeng.2016.06.659
|
58. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Estimate of weldability and selection of optimal welding technology for the cover of a tube girder made of the Cr-Mn high strength steel, null Zvaranie 2016 - 17-27.pdf
|
59. Ratkovic N., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Micro-structure in the joint friction plane in friction welding of dissimilar steels, null, 10.1016/j.proeng.2016.06.686
|
60. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Investigation of the lubrication influence on single-phase and multi-phase ironing processes, null, 10.1016/j.proeng.2016.06.636
|
61. Djordjevic Milan, Aleksandrovic Srbislav, Nikolic Ruzica, Lazic Vukic, Arsić Dušan, Influence of the variable contact pressure on the tensile force in the process of strip sliding in the flat die in ironing, null 50_SEMDOK 2016_3_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
62. Ratkovic Nada, Lazic Vukic, Arsić Dušan, Uticaj vremena trenja na oblik spoja i mikrostrukturu zone mešanja kod trenjem zavarenog spoja, null Zavarivanje 2016-rad.pdf
|
63. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Influence of the sliding speed on the wear resistance of parts hard faced by the high-alloyed filler metal which operate in conditions without lubrication, null 50_SEMDOK 2016_1_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
64. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Hadzima Branislav, Reparation of the fractured mandrel axle-shaft by welding, null, 10.1201/b19249-4
|
65. Lazic Vukic, Arsić Dušan, Djordjevic Milan, Nikolic Ruzica, Hadzima Branislav, Electrical resistance spot brazing of two different alloys, null, 10.1201/b19249-20
|
66. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental Determination of Residual Stresses in the Hard-faced Layers after Hard-facing and Tempering of Hot Work Steels, null, 10.1016/j.proeng.2016.08.139
|
67. Lazic Vukic, Arsić Dušan, Milan Djordjevic, Nikolic Ruzica, Hadzima Branislav, Electrical resistance spot brazing of two different alloys, null b19249-20 - V. Lazic et. al.pdf
|
68. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Influence of the contact and compacting pressures on the quality of the friction welded joint, null 50_SEMDOK 2016_2_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
69. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels, null, 10.1016/j.proeng.2016.08.139 (ISSN 1877-7058) VL PROENG printed.pdf
|
70. Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Nikolic Ruzica, Djordjevic Milan, Hadzima Branislav, Experimental investigations of the high-strength steel welded samples, null ZVÁRANIE 2017-16-28.pdf
|
71. Aleksandrovic Srbislav, Djačić S., Stefanovic Milentije, Djordjevic Milan, Lazic Vukic, Arsić Dušan, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, null DEMI 2017- pp. 77-86.pdf
|
72. Aleksandrovic Srbislav, Djačić S., Djordjevic Milan, Arsić Dušan, Lazic Vukic, Influence of process parameters on the friction coefficient in AlMg3 alloy stripe ironing drawing test, null SerbiaTrib 2017-pp 351-356.pdf
|
73. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Influence of tribological conditions and continuously variable contact pressure on the process of the thin sheet sliding during the flat-die test, null ICMEN 2017--173-182.pdf
|
74. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Arsić Miodrag, Hadzima Branislav, Procedure for selecting the low alloy-tempered steel for manufacturing the responsible highly loaded parts, null SEMDOK_2017_File 1.pdf
|
75. Arsić Dušan, Lazic Vukic, Palček Peter, Nikolic Ruzica, Radovic Ljubica, Ilić Nada, Selection of the optimal hard-facing technology for reparation of the machine parts made of hot work tool steel, null 5.7 FINAL D. Arsic_ IIW International Congress_BG_2018_Final.pdf
|
76. Lazic Vukic, Arsić Dušan, Rakićević Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Marinkovic Petar, Ratkovic Nada, Uticaj vrste zavarenog spoja na balistička svojstva pancirnog čelika ARMOX 500T, null SPMS 2018--pp 173-177.pdf
|
77. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Mesko J., Radovic Ljubica, Ilić Nada, Review of the hard-facing technology application for reparation of the given parts in various branches of industry, null, 10.2478/mape-2018-0035 MAPE 2018_File 2-merged.pdf
|
78. Lazic Vukic, Arsić Dušan, Ilic I., Aleksandrovic Srbislav, Nikolic Ruzica, Djordjevic Milan, Hadzima Branislav, Qualification of the welding technology of the structural steel S355J2G3, null, 10.1088/1757-899X/419/1/012019 (ISSN 1757-8981) 10.1088-1757-899X-419-1-012019.pdf
|
79. Lazic Vukic, Arsić Dušan, Sedmak Aleksandar, Nikolic Ruzica, Opačić Mirjana, Accuracy assessment of formulas for cooling time (t8/5) calculation during the welding of carbon steels, null V. Lazic et al._Ostrava.pdf
|
80. Aleksandrovic Srbislav, Djordjevic Milan, Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Aleksandra Pataric, MODEL KLIZANJA OBODA LIMA IZMEĐU RAVNIH KONTAKTNIH POVRŠINA U PROCESU DUBOKOG IZVLAČENJA PRI PROMENLJIVOM KONTAKTNOM PRITISKU, null SPMS 2018--pp 28-36.pdf
|
81. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Mechanical properties of hot-work tool steel at elevated temperatures, null Arsic et. al_SEMDOK 2018 7-12.pdf
|
82. Ilic A., Ivanović Lozica, Josifovic D., Lazic Vukic, Živković Jelena, Effects of welding on mechanical and microstructural characteristics of high-strength low-alloy steel joints, null, 10.1088/1757-899X/393/1/012020 (ISSN 1757-8981) 10.1088-1757-899X-393-1-012020.pdf
|
83. Arsić Dušan, Lazic Vukic, Sedmak Aleksandar, Burzić Zijah, Medjo Bojan, Nikolic Ruzica, Experimental-numerical analysis of appearance and growth of a crack in hard-faced layers of the hot-work high-strength tool steels, null, Book of abstracts from 22nd European Conference on Fracture - ECF22 ECF22-Rad 3.pdf
|
84. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, null TRANSCOM 2019-abstract, printed.pdf
|
85. Ilic A., Ivanović Lozica, Lazic Vukic, Josifovic D., Welding method as influential factor of mechanical properties at high-strength low-Alloyed steels, null, 10.1088/1757-899X/659/1/012036 (ISSN 1757-8981)
|
86. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Reparatory surface welding of the fractured tooth of the bucket‐wheel excavator girth gear, null 1212.pdf
|
87. Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Physical properties of selected rock materials, null SEMDOK_2020_Paper.PDF
|
88. Todic Aleksandar, Milan Djordjevic, Lazic Vukic, Arsić Dušan, Pejović Branko, Ispitivanje promene čvrstoće u zavisnosti od količine ugljenika i vanadijuma kod visokolegiranih Cr-Mo-V čelika, null SPSM 2021 - rad A. Todic i dr..pdf
|
89. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Pataric Aleksandra, Jelić Aleksandra, Putic Slavisa, Primena numeričke simulacije u postupku dubokog izvlačenja tankog lima sa stanjenjem na osnovu realizovanog fizičkog modela, null Zbornik radova Politehnika_izdvojeno.pdf
|
90. Aleksandrovic Srbislav, Bacanin Radovan, Delić Marko, Lazic Vukic, Arsić Dušan, Određivanje eksponenta deformacionog ojačavanja za limove od različitih materijala, null SPMS 2021 - 269-277.pdf
|
91. Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Arsić M., Popović O., Prokic Cvetkovic Radica, Hadzima Branislav, Analysis of welding of the rear bridge semi-housing assembly of a firefighter truck by the semi-automatic procedure in gas protection, null, 10.1016/j.trpro.2021.07.020 (ISSN 2352-1457)
|
92. Ilic Marjan, Ivkovic Djordje, Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Arsić Miodrag, TEORIJSKO-EKSPERIMENTANA OCENA ZAVARLJIVOSTI RAZNIH TIPOVA NAVARENIH ČELIKA, null Zavarivanje Kladovo- 2021-1-14.pdf
|
93. Ivković Djordje, Arsić Dušan, Milan Mutavdzic, Lazic Vukic, Aleksandrovic Srbislav, Djordjevic Milan, Importance of tribological investigations in selecting the technology for reparation of working parts of construction mechanization, null Serbiatrib2023 - Ivkovic et al..pdf
|
94. Ivkovic Djordje, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Ulewicz Robert, Procedure for replacing the material for manufacturing the responsible welded structure, null SEMDOK2023-scaned paper.pdf
|
95. Nikolic Ruzica, Ivkovic Djordje, Arsić Dušan, Lazic Vukic, Jackova Martina, Possibility of replacing low-carbon construction steels with high strength steels for producing the welded structures in heavy machinery industry, null Nikolic et al_WELDING_2023_Proceedings.pdf
|
96. Ivkovic Djordje, Arsić Dušan, Vulovic Radun, Lazic Vukic, Sedmak Aleksandar, Aleksandrovic Srbislav, Djordjevic Milan, Possibility of replacing low-carbon structural steel with high-strength steels, for producing welded structures in industry of heavy machines, null 233 Heavy Mach V Banja 2023 - B71-B78.pdf
|
97. Ivkovic Djordje, Arsić Dušan, Aleksandrovic Srbislav, Lazic Vukic, Andjela Ivković, Experimental investigations of tensile properties of ultra-high strength steel S1100QL at room and elevated temperature, null Ivkovic et al._DIVK12_2024.pdf
|
| |
technicalReport
|
1. Arsić Miodrag, Savković Mile, Lazic Vukic, Arsić Dušan, Ivanović Ivana, Tadic Srdjan, Reparatura navarivanjem oštećenog bata kovačkog čekića Huta Zygmunt MPM 5000, Tehničko rešeneje - Zastava Kovačnica a.d., Kragujevac, 2018, null МФКВ - Техничко решење M82 - Бат ковачког чекића - 2018.pdf
|
