| |
article
|
1. Jeremic Marija, Matejic Milos, Bojan Bogdanović, Tadic Branko, Miloradović Danijela, Dragomir Miljanić, Analyzing the Influence of the Construction Element Position on Torque Transmission by Friction, null (ISSN 2217-7965) M24.pdf
|
2. Matejic Milos, Nikolic Ruzica, INVESTIGATION OF POSSIBLE CAUSES FOR APPEARANCE OF A CRACK IN THE WELDED JOINT OF THE SHIP WINCH FRAME, null (ISSN 1338-6174) 290079735.pdf
|
3. Matejic Milos, Catic Dobrivoje, Improving K2S Machine Design According to Dynamic Fault Tree Analysis, null PT_04-2014 - Matejic.pdf
|
4. Marjanovic Nenad, Kostic Nenad, Petrovic Nenad, Blagojevic Mirko, Matejic Milos, Biserka Isailović, COMPARATIVE ANALYSIS OF ANALYTICAL CALCULATION AND OPTIMIZATION ON GEARBOX DIMENSIONS AND VOLUME, null (ISSN 2406-0666) MACHINE_DESIGN_753fa9983e8b21a33866e9ca9f52660c.pdf
|
5. Matejic Milos, Blagojevic Mirko, Vesna Marjanović, Vujanac Rodoljub, Stojanović Boban, Tribological Aspects of the Process of Winding the Steel Rope Around the Winch Drum, null (ISSN 2217-7965) 11.pdf
|
6. Matejic Milos, Milorad Bojić, Kostic Nenad, Marjanovic Nenad, Blagojevic Mirko, ODREĐIVANJE GEOMETRIJSKIH PARAMETARA ZA OPTIMALNO ISKORIŠĆENJE PRIJEMNIKA SUNČEVE ENERGIJE, null (ISSN 0350–1426) 1587-1-4773-1-10-20170128.pdf
|
7. Blagojevic Mirko, Djordjevic Zorica, Matejic Milos, Kostic Nenad, Petrovic Nenad, Dynamic model of cycloidal speed reducer, null (ISSN 2334-9891) Blagojevic_MVMJ_2015_DYNAMIC MODEL OF CYCLOIDAL SPEED REDUCER_M52.pdf
|
8. Matejic Milos, Ivanović Lozica, Petrovic Nenad, ADOPTION OF OPTIMAL TEETH PARAMETERS OF GEROTOR PUMP, null (ISSN 2067 – 3809) ACTA-2015-3-06.pdf
|
9. Kostic Nenad, Milorad Bojić, Matejic Milos, Petrovic Nenad, Vesna Marjanović, Pogodnosti optimizacije niskih stambenih objekata, null (ISSN 0350–1426) 1556-1-4680-1-10-20170127.pdf
|
10. Ivanović Lozica, Rakic B., Stojanovic Blaza, Matejic Milos, Comparative analysis of analytical and numerical calculations of contact stresses at rotational elements of gerotor pumps, null (ISSN 2466-4677) AEL00001.pdf
|
11. Marjanovic Nenad, Kostic Nenad, Petrovic Nenad, Matejic Milos, Blagojevic Mirko, GENETIC ALGORITHM PARAMETER CONTROL FOR ACHIEVING BETTER OPTIMIZATION PERFORMANCE, null (ISSN 1584-2673) ANNALS-2016-1-39.pdf
|
12. Ivanović Lozica, Ilic Andreja, Stojanovic Blaza, Glišović Jasna, Matejic Milos, Influence of leakage clearance on pressure variation in gerotor pump chambers, null (ISSN 1821-1259) 145-150.pdf
|
13. Kostic Nenad, Matejic Milos, Petrovic Nenad, Blagojevic Mirko, Marjanovic Nenad, Optimizacija geometrijskih veličina toplotnih prijemnika sunčeve energije heurističkim optimizacionim metodama, null, 10.24094/kghc.017.46.2.145 (ISSN 2560-340X) 2573-1-7778-1-10-20170526.pdf
|
14. Marjanovic Nenad, Kostic Nenad, Petrovic Nenad, Blagojevic Mirko, Matejic Milos, TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM FOR SOLVING MACHINE DESIGN CONSTRAINED OPTIMIZATION, null (ISSN 1584-2665) ANNALS-2017-2-15.pdf
|
15. Blagojevic Mirko, Matejic Milos, Kostic Nenad, Petrovic Nenad, Marjanovic Nenad, Stojanovic Blaza, THEORETICAL AND EXPERIMENTAL TESTING OF PLASTIC CYCLOID REDUCER EFFICIENCY IN DRY CONDITIONS, null (ISSN 1310-4772) THEORETICAL_AND_EXPERIMENTAL_TESTING_OF.pdf
|
16. Matejic Marija, Matejic Milos, Milicevic Marijana, Ivanović Lozica, A NEW CONCEPT OF BICYCLE FRAME DESIGN, null (ISSN 1821-1259) MACHINE_DESIGN_6ca7ef035dca6aad42f333e35cf8d2d7.pdf
|
17. Petrovic Luka, Matejic Milos, Blagojevic Mirko, COMPARATIVE ANALYSIS OF POWER TRANSMISSION GEARBOXES WITH HIGH GEAR RATIOS, null (ISSN 1821-1259) MACHINE_DESIGN_6dd42de3b3869368833230c9714d5a16.pdf
|
18. Rackov M., Blagojevic Mirko, Kuzmanović B., Matejic Milos, Knežević I., Čavić M., Influence of the teeth number on the gear module value and load capacity of gear pair in universal helical gear drives, null, 10.18485/aeletters.2018.3.1.4 (ISSN 2466-4677) 10.18485-aeletters.2018.3.1.4.pdf
|
19. Blagojevic Mirko, Matejic Milos, Kostic Nenad, Dynamic behaviour of a two-stage cycloidal speed reducer of a new design concept, null, 10.17559/TV-20160530144431 (ISSN 1330-3651) 10.17559-TV-20160530144431.pdf
|
20. Vasić Milan, Matejic Milos, Blagojevic Mirko, INFLUENCE ANALYSIS OF SELECTED TURBINE TO WORKING CHARACTERISTICS OF SMALL HYDRO POWER PLANTS, null (ISSN 1821-1259) MACHINE_DESIGN_8657aa16a654aba7c87fd4aaacc67097.pdf
|
21. Petrovic Nenad, Marjanovic Nenad, Kostic Nenad, Blagojevic Mirko, Matejic Milos, Troha S., Effects of introducing dynamic constraints for buckling to truss sizing optimization problems, null, 10.5937/fmet1801117P (ISSN 1451-2092) 10.5937-fmet1801117P.pdf
|
22. Kostic Nenad, Blagojevic Mirko, Petrovic Nenad, Matejic Milos, Marjanovic Nenad, Determination of real clearances between cycloidal speed reducer elements by the application of heuristic optimization, null, 10.21278/TOF.42102 (ISSN 1333-1124) 10.21278-TOF.42102.pdf
|
23. Matejic Milos, Blagojevic Mirko, Kostic Nenad, Petrović Nenad, Marjanovic Nenad, ANALYSIS OF EFFICIENCY OF A NEW TWO STAGE CYCLOID DRIVE CONCEPT, null, 10.24874/PES01.01.043 (ISSN 2620-2832)
|
24. Matejic Milos, Ivanović Lozica, Stojanovic Blaza, MODERN SYSTEMS IN TECHNICAL DOCUMENTATION WORKFLOW DESIGN SOLUTION, null, 10.24867/MD.12.2020.4.95-98 (ISSN 1821-1259) MACHINE_DESIGN_041f128cc116b04e510c9c6a12bafe24.pdf
|
25. Matejic Milos, Blagojevic Mirko, Kostic Nenad, Petrović Nenad, Marjanovic Nenad, Efficiency analysis of new two-stage cycloid drive concept, null, 10.24874/ti.880.05.20.06 (ISSN 0354-8996) 10.24874-ti.880.05.20.06.pdf
|
26. Vasić Milan, Matejic Milos, Blagojevic Mirko, A COMPARATIVE CALCULATION OF CYCLOID DRIVE EFFICIENCY, null, 10.24867/MD.12.2020.4.71-76 (ISSN 1821-1259) MACHINE_DESIGN_33295763493b05bdd15df10cc96697b4.pdf
|
27. Ivanović Lozica, Matejic Milos, Improving gerotor pump performance trough design, modeling and simulation, null, 10.13052/ijfp1439-9776.2132 (ISSN 1439-9776)
|
28. Matejic Milos, Blagojevic Mirko, Matejic Milos, Dynamic behaviour of a planetary reducer with double planet gears, null, 10.5194/ms-12-997-2021 (ISSN 2191-9151) 10.5194-ms-12-997-2021.pdf
|
29. Matejic Milos, Blagojevic Mirko, Disic Aleksandar, Matejic Marija, Milovanović Vladimir, Miletic Ivan, A Dynamic Analysis of the Cycloid Disc Stress-Strain State, null, 10.3390/app13074390 (ISSN 2076-3417) applsci-13-04390-v2.pdf
|
| |
doctoralThesis
|
1. Matejic Milos, NOVI PRISTUP PROJEKTOVANJU I OPTIMIZACIJI CIKLOIDNIH PRENOSNIKA SNAGE, null MMatejic_Disertacija.pdf
|
| |
book
|
1. Blagojevic Mirko, Đorđević Zorica, Matejic Milos, Zbirka rešenih ispitnih zadataka iz mašinskih elemenata, null ME-Zbirka zadataka 1-5.pdf
|
| |
conferenceObject
|
1. Matejic Milos, Veljovic Ljiljana, Vesna Marjanović, Blagojevic Mirko, Marjanovic Nenad, DYNAMIC BEHAVIOR OF PLANETARY GEARBOX NEW CONCEPT, null 2013-M33-DEMI-Matejic - Rad.pdf
|
2. Petrović Nenad, Blagojevic Mirko, Marjanovic Nenad, Matejic Milos, PARAMETRIC DRAWING OF A CYCLO DRIVE SHORTENED EQUIDISTANT EPITROCHOID GEAR, null 2013-M33-IQC-Petrovic - Rad.pdf
|
3. Matejic Milos, Blagojevic Mirko, Vesna Marjanović, Vujanac Rodoljub, Simić Boban, TRIBOLOGICAL ASPECTS OF THE PROCESS OF WINDING THE STEEL ROPE AROUND THE WINCH DRUM, null 2013-M33-SERBIATRIB-Matejic - Rad.pdf
|
4. Matejic Milos, Veljovic Ljiljana, Blagojevic Mirko, Marjanovic Nenad, DYNAMIC BEHAVIOUR OF C CONCEPT PLANETARY REDUCER, null 2013-M33-ICPE-Matejic - Rad.pdf
|
5. Matejic Milos, Blagojevic Mirko, Đorđević Zorica, Marjanovic Nenad, Petrović Nenad, COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, null 2013-M33-IQC-Matejic - Rad.pdf
|
6. Đorđević Zorica, Jovanović Saša, Bojic Milorad, Adamovic Dragan, Matejic Milos, THE INFLUENCE OF TV AND VIDEO APPLIANCES AND INFORMATION TECHNOLOGY EQUIPMENT ON ENERGY CONSUMPTION IN HOUSEHOLDS, null 2013-M33-IQC-Djordjevic - Rad.pdf
|
7. Kostic Nenad, Matejic Milos, Bogdanović Gordana, Cvetković Dragan, Bojic Milorad, DETERMINING GEOMETRICAL PARAMETERS OF EXTERNAL WALLS ON LOW-RISE RESIDENTIAL BUILDINGS WITH GABLE AND PITCHED ROOFS AND OPTIMIZATION OF ITS ECOLOGICAL PARAMETERS, null 2014-M33-IQC-Kostic - Rad.pdf
|
8. Matejic Milos, Nikolic Ruzica, CAUSES FOR CRACK APPEARANCE IN THE WELDED JOINT OF THE SHIP WINCH FRAME DURING THE FAT TEST, null 2014-M33-Matejic -Rad.pdf
|
9. Blagojevic Mirko, Petrović Nenad, Kostic Nenad, Matejic Milos, Marjanovic Nenad, PRODUCT DEVELOPMENT AT THE FACULTY OF ENGINEERING UNIVERSITY IN KRAGUJEVAC, null 2014-M33-COMETa-Blagojevic - Rad.pdf
|
10. Blagojevic Mirko, Đorđević Zorica, Matejic Milos, Kostic Nenad, Petrović Nenad, DYNAMIC MODEL OF CYCLOIDAL SPEED REDUCER, null 2014-M33-MVM-Blagojevic - Rad.pdf
|
11. Matejic Milos, Bojic Milorad, Kostic Nenad, Marjanovic Nenad, Blagojevic Mirko, OPTIMIZATION OF GEOMETRIC PARAMETERS TO AUTOMATE SOLAR COLLECTOR DESIGN, null 2014-M33-KGH-Matejic - Rad.pdf
|
12. Blagojevic Mirko, Marjanovic Nenad, Petrović Nenad, Matejic Milos, Bojic Milorad, MULTI CRITERIA OPTIMIZATION OF LOW-RISE DETACHED HOUSE HEATING SYSTEMS IN AN ATTEMPT TO MINIMIZE ENVIRONMENTAL DAMAGE AND MAXIMIZE COMFORT OF USE, null 2014-M33-IQC-Blagojevic - Rad.pdf
|
13. Kostic Nenad, Bojic Milorad, Matejic Milos, Petrović Nenad, Vesna Marjanović, BENEFITS OF OPTIMIZING LOW-RISE BUILDINGS, null 2014-M33-KGH-Kostic - Rad.pdf
|
14. Matejic Milos, Ivanović Lozica, Petrović Nenad, Kostic Nenad, Determination of the most influential factor during the rope winding process around winch drums using Taguchi method, null 2014-M33-BALKANTRIB-Matejic - Rad.pdf
|
15. Matejic Milos, Blagojevic Mirko, Petrović Nenad, Cvetković Dragan, Bojic Milorad, INFLUENCE OF THE MEANS, INTENSITY AND POSSIBILITIES OF EXPLOATING LOW-RISE BUILDINGS ON ENERGY SAVINGS AND RESULTS OF THEIR OPTIMIZATION, null 2014-M33-IQC-Matejic (1) - Rad.pdf
|
16. Matejic Milos, Ćatić Dobrivoje, Petrović Nenad, Velickovic Sandra, Mikovic Jasmina, BELT CONVEYER ANALYSIS USING FAULT TREE ANALYSIS METHOD, null 2014-M33-IQC-Matejic - Rad.pdf
|
17. Kostic Nenad, Petrović Nenad, Marjanovic Nenad, Blagojevic Mirko, Matejic Milos, PARAMETRIC MODELING OF GEAR TRANSMISSIONS IN CAD SOFTWARE WITH DEFINABLE SHAFT AXIS POSITIONS, null 2014-M33-COMETa-Kostic - Rad.pdf
|
18. Đorđević Zorica, Rasic Jovana, Blagojevic Mirko, Matejic Milos, Petrović Nenad, TRUCK SUPPORTIVE CHASSIS STRUCTURAL STATIC ANALYSIS, null 2014-M33-MVM-Djordjevic - Rad.pdf
|
19. Matejic Milos, Ivanović Lozica, Petrović Nenad, ADOPTION OF OPTIMAL TEETH PARAMETERS OF GEROTOR PUMP, null 2014-M33-COMETa-Matejic - Rad.pdf
|
20. Matejic Milos, Milorad Bojić, Kostic Nenad, Petrovic Nenad, Blagojevic Mirko, OPTIMIZATION OF SOLAR COLLECTOR GEOMETRIC VALUES, null 2015-M33-KGH-Matejic rad.pdf
|
21. Đorđević Zorica, Krstic Ivan, Blagojevic Mirko, Jovanovic Sasa, Matejic Milos, Analysis of Stress-Strain State of the Plate Spring, null 2015-M33-MASING-Djordjevic - Rad.pdf
|
22. Matejic Milos, Bojic Milorad, Petrović Nenad, Marjanovic Nenad, Blagojevic Mirko, COMPARATIVE ANALYSIS OF ALTERNATIVE SOLAR COLLECTORS FOR LOW-RISE HOUSING UNITS, null 2015-M33-IQC9-Matejic - Rad.pdf
|
23. Petrovic Nenad, Matejic Milos, Kostic Nenad, Blagojevic Mirko, Marjanovic Nenad, Parametric Modeling of a Cycloid Drive Relative to Input Shaft Angle, null 2015-M33-MASING-Matejic - Rad.pdf
|
24. Cvetković Dragan, Bojic Milorad, Taranović Dragan, Skerlić Jasmina, Matejic Milos, Kostic Nenad, THE IMPACT OF THE CONTROLLER POSITION ON THE ENERGY CONSUMPTION AT THE FLOOR-CEILING HEATING, null 2015-M33-IQC9-Cvetkovic - Rad-1.pdf
|
25. Blagojevic Mirko, Pantić Ivan, Matejic Milos, MODAL ANALYSIS OF CYCLOIDAL SPEED REDUCER, null 2015-M33-IQC9-Pantic - Rad.pdf
|
26. Kostic Nenad, Matejic Milos, Petrovic Nenad, Blagojevic Mirko, Marjanovic Nenad, OPTIMIZATION OF SOLAR COLLECTOR GEOMETRIC PARAMETERS USING A HEURISTIC OPTIMIZATION METHODS, null 2016-M33-KGH-Kostic - Rad.pdf
|
27. Cvetkovic M., Matejic Milos, Blagojevic Mirko, RAPID PROTOTYPING OF CYCLOID DISC, null 2016-M33-MVM-Cvetkovic - Rad.pdf
|
28. Matejic Milos, Ivanović Lozica, Kostic Nenad, PARAMETRIC MODELING OF GEROTOR PUMP, null 2016-M33-COMETa-Matejic - Rad.pdf
|
29. Marjanovic Nenad, Kostic Nenad, Petrovic Nenad, Blagojevic Mirko, Matejic Milos, TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM FOR SOLVING MACHINE DESIGN CONSTRAINED OPTIMIZATION, null 2016-M33-COMETa-Kostic - Rad.pdf
|
30. Blagojevic Mirko, Matejic Milos, STRESS AND STRAIN STATE OF CYCLOID GEAR UNDER DYNAMIC LOADS, null 2016-M33-KOD-Blagojevic - Rad.pdf
|
31. Ivanović Lozica, Miladinovic Slavica, Stojanovic Blaza, Matejic Milos, APPLICATION OF MAGNETIC TRANSMISSION IN AUTOMOTIVE INDUSTRY, null 2016-M33-MVM-Ivanovic - Rad.pdf
|
32. Matejic Marija, Matejic Milos, Milicevic Marijana, Ivanović Lozica, A NEW CONCEPT OF BICYCLE FRAME DESIGN, null 2016-M33-KOD-Matejic - Rad.pdf
|
33. Marjanovic N., Kostic N., Petrovic Nenad, Blagojevic M., Matejic Milos, Volume optimization of gear trains with spur gears using genetic algorithm, null, 10.1051/matecconf/201712101007 10.1051-matecconf-201712101007.pdf
|
34. Matejic Milos, Petrović Nenad, Kostic Nenad, Blagojevic Mirko, Marjanovic Nenad, FRICTION INFLUENCE REDUCING BY USING LINER BEARINGS AND BALL SCREW SHAFTS IN MINI-PLATFORMS, null 2017-M33-SERBIATRIB-Matejic (1) - Rad.pdf
|
35. Petrović Nenad, Marjanovic Nenad, Kostic Nenad, Blagojevic Mirko, Matejic Milos, SIZING OPTIMIZATION OF PARAMETRICALLY DESIGNED TRUSSES, null 2017-M33-DEMI-Petrovic - Rad.pdf
|
36. Marjanovic Nenad, Kostic Nenad, Petrović Nenad, Blagojevic Mirko, Matejic Milos, A NEW MODIFICATION OF GENETIC ALGORITHM FOR SOLVING ENGINEERING OPTIMIZATION PROBLEMS, null 2017-M33-IRMES-Marjanovic - Rad.pdf
|
37. Ivanović Lozica, Ilic Andreja, Stojanovic Blaza, Glišović Jasna, Matejic Milos, INFLUENCE OF LEAKAGE CLEARANCE ON PRESSURE VARIATION IN GEROTOR PUMP CHAMBERS, null 2017-M33-IRMES-Ivanovic - Rad.pdf
|
38. Rackov Milan, Blagojevic Mirko, Kuzmanović Siniša, Matejic Milos, Knežević Ivan, Čavić Maja, Penčić Marko, ANALYSIS OF THE TEETH NUMBER INFLUENCE ON THE GEAR MODULE SIZE AND LOAD CARRYING CAPACITY OF GEAR PAIR OF UNIVERSAL HELICAL GEAR DRIVES, null 2017-M33-IRMES-Rackov - Rad.pdf
|
39. Matejic Marija, Matejic Milos, Novkinic B., Živković Milutin, Tadic Branko, INFLUENCE OF FRICTION ON INCREASE STIFFNESS OF MODULAR FIXTURE SYSTEMS, null 2017-M33-Matejic - Rad.pdf
|
40. Delić Marko, Đorđević Zorica, Matejic Milos, Jovanović Saša, Calculation of stresses of gear made of composite materials, null 2017-M33-DEMI-Delic - Rad.pdf
|
41. Nikolić Novak, Lukic Nebojsa, Dagović Vujadin, Nešović Aleksandar, Matejic Milos, IMPACT OF THE METHODS OF OCCUPANCY SCHEDULE DEFINING ON PEOPLE HEAT GAINS WITHIN A STUDENT DORMITORY, null 4101-25-12531-1-10-20181220.pdf
|
42. Ivanović Lozica, Ilic A., Miloradović Danijela, Matejic Milos, Josifovic D., Modelling and simulation of the load in the epicyclic rotary pump with trochoidal gear profiles, null, 10.1088/1757-899X/393/1/012049 (ISSN 1757-8981) 10.1088-1757-899X-393-1-012049.pdf
|
43. Pantić Ivan, Matejic Milos, Blagojevic Mirko, SINGLE-STAGE CYCLOID REDUCER DYNAMIC ANALYSES USING PLM SOFTWARE, null Zbornik radova COMETa2018_PDF_50.pdf
|
44. Matejic Milos, Ivanović Lozica, FEM ANALYSIS OF GEROTOR MACHINES IMPELLER WITH PLANETARY MOTION, null Zbornik radova COMETa2018_PDF_40.pdf
|
45. Matejic Milos, Blagojevic Mirko, Kostic Nenad, Nikolić Novak, USAGE OF ADVANCED CAD TOOLS FOR PARAMETRIC MODELING AND EFFICIENCY CALCULATON OF SOLAR COLLECTORS, null 4084-25-12483-1-10-20181220.pdf
|
46. Stryczek J., Bednarczyk S., Codina-Macia Esteban, GAMEZ-MONTERO PEDRO JAVIER, Ivanović Lozica, Matejic Milos, Gears or rotors-three approaches to design of working units of hydraulic machines, null, 10.1088/1757-899X/659/1/012006 (ISSN 1757-8981) 10.1088-1757-899X-659-1-012006.pdf
|
47. Matejic Milos, Blagojevic Mirko, Cofaru I., Kostic Nenad, Petrović Nenad, Marjanovic Nenad, Determining efficiency of cycloid reducers using different calculation methods, null, 10.1051/matecconf/201929001008 (ISSN 2274-7214)
|
48. Petrovic Nenad, Kostic Nenad, Marjanovic Nenad, Blagojevic Mirko, Matejic Milos, INFLUENCE OF BUCKLING ON TRUSS STRUCTURAL OPTIMIZATION, null NPetrovic-M33-2019-DEMI.pdf
|
49. Blagojevic Mirko, Matejic Milos, Vasić Milan, COMPARATIVE OVERVIEW OF CALCULATION OF NORMAL FORCE ON CYCLOIDAL GEAR TOOTH, null Blagojevic_MVM 2020_COMPARATIVE OVERVIEW OF CALCULATING.pdf
|
50. Vasić Milan, Matejic Milos, Blagojevic Mirko, A COMPARATIVE CALCULATION OF CYCLOID DRIVE EFFICIENCY, null Vasic COMETa2020_31.pdf
|
51. Matejic Milos, Ivanović Lozica, Stojanovic Blaza, MODERN SYSTEMS IN TECHNICAL DOCUMENTATION WORKFLOW, null Matejic COMETa2020_41.pdf
|
52. Matejic Milos, Pantić Marko, Blagojevic Mirko, COMPARATIVE ANALYSIS BETWEEN CPQ SYSTEMS, null Matejic COMETa2020_32.pdf
|
53. Matejic Milos, Dragoi M., Blagojevic Mirko, Filip A., Miletić I., Progressive screw shaft manufacturing technology, null, 10.1088/1757-899X/1009/1/012038 (ISSN 1757-8981)
|
54. Matejic Milos, Design Improvement of Multi-disc Wet Hydraulic Brake, null, 10.1007/978-3-030-59509-8_37 (ISSN 2195-4356)
|
55. Vasić Milan, Blagojevic Mirko, Matejic Milos, Cofaru Ileana Ioana, The influence of the cycloid disc bearing type on the cycloidal speed reducer efficiency, null, 10.1051/matecconf/202134301004 (ISSN 2261-236X) matecconf_mse21_01004.pdf
|
56. Matejic Milos, Matejic Marija, Mudrić-Staniškovski Ljubica, Miletic Ivan, IMPLEMENTATION OF MATHEMATIC MODELS IN DESIGN AUTOMATION, null 12-282 Matejic.pdf
|
57. Matejic Marija, Matejic Milos, Živić Jovana, Ivanović Lozica, DESIGN AND TESTING OF ABRASIVE BELT GRINDER, null 4-284 Matejic.pdf
|
58. Dragoi M., Nasulea M., Matejic Milos, Oancea Gheorghe, Balancing Rotating Parts. A New Method and Device, null, 10.1007/978-3-030-88465-9_15 (ISSN 2211-0984)
|
59. Matejic Milos, Matejic Marija, Ivanović Lozica, A NEW CONCEPT OF BELT GRINDER DESIGN WITH IMPROVED FRAME RIGIDITY, null ANEWCONCEPTOFBELTGRINDERDESIGNWITHIMPROVEDFRAMERIGIDITY.pdf
|
60. Vasić Milan, Blagojevic Mirko, Matejic Milos, Efficiency of non-pin wheel cycloid reducer concept, null Vasic_Blagojevic_Matejic_2022_EFFICENCYOFNON-PINWHEEL (1).pdf
|
61. Matejic Marija, Ivanović Lozica, Matejic Milos, Comparative Analysis of Rotation Welding Positioners Based on Friction Forces, null, 10.1007/978-3-030-88465-9_54 (ISSN 2211-0984)
|
62. Matejic Milos, Goluza V., Vasic M., Blagojevic Mirko, Analysis of Two-Stage Cycloid Speed Reducers Dimensions and Efficiency, null, 10.1007/978-3-030-88465-9_14 (ISSN 2211-0984)
|
63. Milovanović Vladimir, Dunić Vladimir, Zivkovic Miroslav, Matejic Milos, DEGRADATION OF ELASTIC MODULUS IN STEEL DURING FATIGUE TESTING, null Milovanovic et all - 40DAS.pdf
|
64. Matejic Milos, Perović A., Miletic Ivan, Mudrić-Staniškovski Ljubica, Ivanović Lozica, Design automation of set screw connection, null MMatejic-COMETa2024.pdf
|
