| |
article
|
1. Arsić Miodrag, Lazic Vukic, Arsić Dušan, Savić Zoran, Šarkoćević Živče, Effect of enhanced mechanical properties of weld metal and heat affected zone on the strength of the welded joint, null (ISSN 0354-8651) Casopis-ENERGIJA, No. 1-2, 2013, M. Arsic et al..pdf
|
2. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinkovic Petar, Djordjevic Milan, Rajko Čukic, Application of the S690QL class steels in responsible welded structures, null (ISSN 1335-0803) 110-795-1-PB D.A. et. al, final (printed).pdf
|
3. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Stefanovic Milentije, Nikolic Ruzica, Arsić Dušan, Experimental analysis of influence of different lubricants types on the multi-phase ironing process, null (ISSN 1335-0803) Experimental analysis of influence ....pdf
|
4. Aleksandrovic Srbislav, Milan Djordjevic, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Arsić Dušan, Different Ways of Friction Coefficient Determination in Stripe Ironing Test, null (ISSN 0354-8996) S. Aleksandrovic et al. Trib in Ind 2014.pdf
|
5. Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Aleksandrovic Srbislav, Arsić Dušan, Djordjevic Milan, Experimental measurements of residual stresses in welding of steels operating at high temperatures, null Paper 2 Zvaranie.pdf
|
6. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Aleksandrovic Srbislav, Djordjevic Milan, Weldability estimates of some high strength steels, null Paper 1 Zvaranie.pdf
|
7. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Marinković Petar, Djordjevic Milan, Ratkovic Nada, THEORETICAL-EXPERIMENTAL FRACTURE ANALYSIS OF A RESPONSIBLE MACHINE PART, null (ISSN 1451-3749) 141-146-IVK2-2014-DA-VL-SA-RN-PM-MD-NR.pdf
|
8. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstic Bozidar, Marinkovic Petar, Djordjevic Milan, Application of high strength steels to responsible welded structures on motor vehicles, null (ISSN 1450-5304) Arsic_et_all_paper.pdf
|
9. Lazic Vukic, Rajko Čukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Arsić Dušan, Branislav Nedeljkovic, Djordjevic Milan, Techno-economic justification of reparatory hard facing of various working parts of mechanical systems, null (ISSN 0354-8996) 7. V. Lazic et al. Tribology in Industry 2014.pdf
|
10. Arsić Dušan, Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Analysis of the austenitic stainless steel's r-value behavior at elevated temperatures, null (ISSN 1335-0803) Mat inz 22-2-2015-66-76.pdf
|
11. Arsić Dušan, Lazic Vukic, Samardžić I., Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Impact of the hard facing technology and the filler metal on tribological characteristics of the hard faced forging dies, null, 10.17559/TV-20150408152638 (ISSN 1330-3651) 10.17559-TV-20150408152638.pdf
|
12. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Milosavljevic Dragan, Djordjevic Milan, Rajko Čukic, Reparation of damaged forging dies by hard facing (HF) technology, null (ISSN 2353-5156) Prod Eng Arch-6-1-2015-26-29.pdf
|
13. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Mutavdzic Milan, Experimental determination of mechanical characteristics of four types of stones and their influence on the construction machinery parts wear, null, 10.4028/www.scientific.net/AMR.1100.178 (ISSN 1662-8985) AMR.1100.178.pdf
|
14. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Hadzima Branislav, Djordjevic Milan, Optimal welding technology of high strength steel S690QL, null (ISSN 1335-0803) Mat inz 22-1-2015-33-47.pdf
|
15. Lazic Vukic, Sedmak Aleksandar, Samardžić I., Aleksandrovic Srbislav, Arsić Dušan, Milosavljevic Dragan, Djordjevic Milan, Shear strength testing of hardfaced samples using special tool on an universal testing machine, null (ISSN 1451-3749) Struct int and life- 15-1-2015 -15-18.pdf
|
16. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Milan Mutavdzic, Aleksandrovic Srbislav, Djordjevic Milan, Wear resistance of layers hard faced by the high-alloyed filler metal, null (ISSN 1335-0803) @Mat inz 20-3-2016-90-97.pdf
|
17. Lazic Vukic, Aleksandrovic Srbislav, Arsić Dušan, Sedmak Aleksandar, Ilic Andreja, Đorđević Milan, Ivanović Lozica, The influence of temperature on mechanical properties of the base material (BM) and welded joint (WJ) made of steel S690QL, null (ISSN 0543-5846) MET_55_2_213_216.pdf
|
18. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Milan Mutavdzic, Mesko J., Reparation by hard facing of the damaged secondary stone crushers, null (ISSN 1213-2489) manufacturing_spolupráca článok 1 - rad scan.pdf
|
19. Bošnjak S., Arsić M., Savicevic S., Milojević Goran, Arsić Dušan, Fracture analysis of the pulley of a bucket wheel boom hoist system, null, 10.17531/ein.2016.2.1 (ISSN 1507-2711) 10.17531-ein.2016.2.1.pdf
|
20. Arsić Dušan, Zahar Djordjevic Marija, Živković Jelena, sedmak aleksandar, Aleksandrovic Srbislav, Lazic Vukic, Rakić Dragan, Experimental-numerical study of tensile strength of the high-strength steel S690QL at elevated temperatures, null, 10.1007/s11223-016-9812-x (ISSN 0039-2316) 10.1007-s11223-016-9812-x.pdf
|
21. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Milan Mutavdzic, Hadzima Branislav, Revitalization of the damaged machine parts by hard facing as a way of saving funds, null (ISSN 2353-5156) Vol. 12, No 3 - 03. V. Lazić, D. Arsić, R. Nikolić, M. Mutavžić, B. Hadzima.pdf
|
22. Arsić Miodrag, Bošnjak S., Gašić Vlada, Arsić Dušan, Savić Zoran, State analysis of components of the damaged structure and integrity evaluation of braces at the spreader A2rs – B 5500.55+, null (ISSN 0354-8651) M. Arsic et al._Energija-br-1-2-2016.pdf
|
23. Ratkovic N., Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Mesko J., Nigrovic R., Influence of the Friction Time on the Shape and Microstructure of the Mixing Zone of the Friction Welded Joint, null, 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1355 (ISSN 1213-2489) 10.21062-ujep-x.2016-a-1213-2489-MT-16-6-1355.pdf
|
24. Arsić Dušan, Lazic Vukic, Mitrovic Slobodan, Dzunic Dragan, Aleksandrovic Srbislav, Djordjevic Milan, Nedeljković B., Tribological behavior of four types of filler metals for hard facing under dry conditions, null, 10.1108/ILT-10-2015-0156 (ISSN 0036-8792)
|
25. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, The contact and compacting pressures influences on the plastic deformation parameters of the friction welded joint, null (ISSN 1335-0803) 192-1626-1-PB-printed.pdf
|
26. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Estimate of weldability of the hot work tool steels via the CCT diagrams, null (ISSN 2344-2409) 1- Arsic D.- Lazic V. - Nikolic R.- Hadzima B..pdf
|
27. Nigrovic R., Mesko J., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Influence of chemical composition of selected materials on the roughness on cutting edge and the width of HAZ, null (ISSN 1213-2489) Nigrovich et al_Manufacturing Technology.pdf
|
28. Djordjevic Milan, Aleksandrovic Srbislav, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, The variable contact pressure influence on the tensile force in the process of strip sliding in the flat die in ironing, null (ISSN 1335-0803) @Mat inz 23-2-2016-74-83.pdf
|
29. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels, null, 10.1016/j.proeng.2016.08.139 (ISSN 1877-7058) VL PROENG printed.pdf
|
30. Djordjevic Milan, Aleksandrovic Srbislav, Arsić Dušan, Lazic Vukic, Milosavljevic Dragan, Nikolic Ruzica, COMPARATIVE STUDY OF AN ENVIRONMENTALLY FRIENDLY LUBRICANT WITH CONVENTIONAL LUBRICANTS IN STRIP IRONING TEST, null (ISSN 1310-4772) @J of Balk Trib Ass -1A-II 2016-947-958-c.pdf
|
31. Djordjevic Milan, Mandic Vesna, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Gulišija Z., Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process, null, 10.1108/ILT-05-2016-0113 (ISSN 0036-8792)
|
32. Lazic Vukic, Arsić Dušan, M. Zrilic, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, Experimental measuring of residual stresses in hard faced layers of the hot work tool steel, null (ISSN 0354-7965) Zavariv i zav kons-2017-19-26.pdf
|
33. Lazic Vukic, Arsić Dušan, Zrilic Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, EXPERIMENTAL MEASURING OF RESIDUAL STRESSES IN HARD FACED LAYERS OF THE HOT WORK TOOL STEEL, null (ISSN 0354-7965) 0354-79651701019L.pdf
|
34. Ratkovic N., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Palcek P., sedmak aleksandar, influence of friction welding parameters on properties of the Al-Cu joint, null, 10.5937/fmet1701165R (ISSN 1451-2092) 10.5937-fmet1701165R.pdf
|
35. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Hadzima Branislav, Welding of the tube girder cover made of the C-Mn steel, null (ISSN 1335-0803) MEMI -SK- 2017-26-35.pdf
|
36. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Arsić Miodrag, Hadzima Branislav, Selecting the low alloy-tempered steel for manufacturing the highly loaded responsible parts, null (ISSN 1335-4205) V. LAZIC et al._SELECTING THE LOW ALLOY-TEMPERED STEEL FOR MANUFACTURING THE HIGHLY LOADED RESPONSIBLE PARTS.pdf
|
37. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Djordjevic D., Prokic-Cvetkovic R., Popović O., Application of the high strength steel hardox 450 for manufacturing of assemblies in the military industry, null, 10.4028/www.scientific.net/KEM.755.96 (ISSN 1013-9826)
|
38. Nigrovic R., Mesko J., Nikolic Ruzica, Lazic Vukic, Arsić Dušan, Hadzima Branislav, Comparison of the PMMA mechanical properties after cutting by the laser beam and milling, null, 10.5937/fmet1801057N (ISSN 1451-2092) 10.5937-fmet1801057N.pdf
|
39. Aleksandrovic Srbislav, Djačić S., Stefanovic Milentije, Djordjevic Milan, Arsić Dušan, Lazic Vukic, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, null (ISSN 2067-3809) ACTA Rum_2018-29-33.pdf
|
40. Bošnjak S., Arsić M., Gnjatovic N., Milenović I., Arsić Dušan, Failure of the bucket wheel excavator buckets, null, 10.1016/j.engfailanal.2017.11.017 (ISSN 1350-6307)
|
41. Velickovic Sandra, Miladinovic Slavica, Stojanovic Blaza, Nikolic Ruzica, Hadzima Branislav, Arsić Dušan, Influence of load and reinforcement content on selected tribological properties of Al/SiC/Gr hybrid composites, null, 10.30657/pea.2018.18.03 (ISSN 2353-5156)
|
42. Ratkovic N., Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Prokic-Cvetkovic R., Popović O., Microstructure in the joining zone during the friction welding of the two dissimilar steels, null, 10.1108/ILT-08-2017-0234 (ISSN 0036-8792)
|
43. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, null, 10.1016/j.trpro.2019.07.060 (ISSN 2352-1465) 1-s2.0-S2352146519302236-main.pdf
|
44. Đorđević M., Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Todic A., Patarić A., THE POSSIBILITIES FOR APPLICATION OF NUMERICAL SIMULATION IN THE IRONING PROCESS OF THIN SHEETS, null, 10.24874/PES01.01.052 (ISSN 2620-2832)
|
45. Djordjevic Milan, Aleksandrovic Srbislav, Djačić S., sedmak aleksandar, Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Simulation of flat die deep drawing process by variable contact pressure sliding model, null, 10.17559/TV-20161215205553 (ISSN 1330-3651) 10.17559-TV-20161215205553.pdf
|
46. Aleksandrovic Srbislav, Đačić S., Đorđević M., Lazic Vukic, Arsić Dušan, DETERMINATION OF CORRECTED PARAMETERS IN STRIP IRONING PROCESS WITH DOUBLE SIDE THINNING, null, 10.24874/PES01.01.058 (ISSN 2620-2832)
|
47. Arsić Dušan, Gnjatovic N., Sedmak Simon, Arsić A., Uhríčik Milan, Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads, null, 10.1016/j.engfailanal.2019.06.072 (ISSN 1350-6307)
|
48. Arsić Dušan, Lazic Vukic, Dzunic Dragan, Aleksandrovic Srbislav, Đorđević M., Uhríčik Milan, Arsić Aleksandra, WEAR RESISTANCE UNDER DRY CONDITIONS OF DIFFERENT FILLER METALS USED FOR HARD FACING, null, 10.24874/PES01.01.055 (ISSN 2620-2832)
|
49. Arsić Dušan, Lazic Vukic, sedmak aleksandar, Aleksandrovic Srbislav, Živković Jelena, Djordjevic Milan, Mladenović G., Effect of elevated temperatures on mechanical properties of ultra high strength hot work tool steel H11, null, 10.21278/TOF.44207 (ISSN 1333-1124) 10.21278-TOF.44207.pdf
|
50. sedmak aleksandar, Arsić M., Sarkocevic Z., Medjo Bojan, Rakin M., Arsić Dušan, Lazic Vukic, Remaining strength of API J55 steel casing pipes damaged by corrosion, null, 10.1016/j.ijpvp.2020.104230 (ISSN 0308-0161)
|
51. Arsić Dušan, Ivanović I., sedmak aleksandar, Lazić Mirjana, Kalaba D., Čeković I., Ratkovic N., Experimental and numerical study of temperature field during hard-facing of different carbon steels, null, 10.2298/TSCI190717338A (ISSN 0354-9836) 10.2298-TSCI190717338A.pdf
|
52. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Hadzima Branislav, Analysis of certain physical properties of four rock materials, null, 10.18485/aeletters.2020.5.4.1 (ISSN 2466-4677) 10.18485-aeletters.2020.5.4.1.pdf
|
53. Aleksandrovic Srbislav, Đačić S., Đorđević M., Ratkovic N., Arsić Dušan, Lazic Vukic, New method of defining of process parameters in double side thinning strip ironing test, null, 10.24874/ti.2020.42.01.06 (ISSN 0354-8996) 10.24874-ti.2020.42.01.06.pdf
|
54. Nikolic Ruzica, Arsić Dušan, Arsić Aleksandra, Šarkoćević Živče, Cvetković Dragan, The fault tree analysis of causes of the welded pipes failures in exploitation, null (ISSN 1335-4205) 1534-Article Text-2956-1-10-20200102.pdf
|
55. Djačić S., Aleksandrovic Srbislav, Arsić Dušan, Delić Marko, Lazic Vukic, Ironing process in conditions of constant and variable lateral force, null, 10.24867/ATM-2021-2-001 (ISSN 2620-147X) ATM-2021-2-1-5.pdf
|
56. Popovic Olivera, Prokic Cvetkovic Radica, Radovic Ljubica, Burzić Zijah, Arsić Dušan, The effect of heat input on the fracture behaviour of surface weld metal of rail steel, null (ISSN 1451-3749) 077-IVK1-2020-OP-RPC-LjR-ZB-DA.pdf
|
57. Arsić M., Arsić Dušan, Flajs Ž., Grbovic Aleksandar, Todic A., Application of Non-Destructive Testing for Condition Analysis, Repair of Damages and Integrity Assessment of Vital Steel Structures, null, 10.1134/S1061830921100053 (ISSN 1061-8309)
|
58. Markovic Nina, Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Ratkovic N., Hadzima Branislav, Szmidla Janusz, Ulewicz Robert, Analysis of the welding type and filler metal influence on performance of a regenerated gear, null, 10.3390/ma14061496 10.3390-ma14061496.pdf
|
59. Nikolic Ruzica, Marković Svetislav, Arsić Dušan, Lazic Vukic, Hadzima Branislav, Ulewicz Robert, Influence of different hard-facing procedures on quality of surfaces of regenerated gears, null, 10.30657/pea.2021.27.34 (ISSN 2353-5156)
|
60. Marković R., Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Milovanović Vladimir, Dwornicka Renata, Ulewicz Robert, Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures, null, 10.3390/ma14154203 10.3390-ma14154203.pdf
|
61. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Aleksandrovic Srbislav, Radovic Ljubica, Ilić Nada, Hadzima Branislav, An Example of Reparatory Surface Welding of the Mining Machine Vital Part, null, 10.26552/com.C.2021.1.B39-B45 (ISSN 1335-4205) Comun 2021 - B39-B45.pdf
|
62. Ilic Marjan, Ivković D., Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Arsić Miodrag, TEORIJSKO-EKSPERIMENTANA OCENA ZAVARLJIVOSTI RAZNIH TIPOVA NAVARENIH ČELIKA, null, 10.5937/zzk2203101I (ISSN 0354-7965) Zav i zav konstr 2022 -101-113.pdf
|
63. Todic A., Djordjevic Milan, Arsić Dušan, Dzunic Dragan, Lazic Vukic, Aleksandrovic Srbislav, Krstić B., INFLUENCE OF VANADIUM CONTENT ON THE TRIBOLOGICAL BEHAVIOUR OF X140CrMol2-l AIR-HARDENING STEEL, null, 10.21278/TOF.462035021 (ISSN 1333-1124) 10.21278-TOF.462035021.pdf
|
64. Ratkovic Nada, Jovanović Pešić Živana, Arsić Dušan, Pešić Miloš, Dzunic Dragan, Tool geometry effect on material flow and mixture in FSW, null, 10.24867/ATM-2022-2-006 (ISSN 2620-0325) ATM-2022-2-006.pdf
|
65. Marković Svetislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Ivković D., Ulewicz Robert, Bokůvka Otakar, Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions, null, 10.3390/ma15217795 (ISSN -)
|
66. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Sczygiol Norbert, Krstic Bozidar, Ivković D., Hadzima Branislav, Pastorek Filip, Ulewicz Robert, Weldability Assessment of Various Steels by Hard-Facing, null, 10.3390/ma15093082 (ISSN 1996-1944)
|
67. Milovanović Vladimir, Arsić Dušan, Milutinovic Miroslav, Zivkovic Miroslav, Topalović Marko, A Comparison Study of Fatigue Behavior of S355J2+N, S690QL and X37CrMoV5-1 Steel, null, 10.3390/met12071199 (ISSN 2075-4701)
|
68. Arsić Dušan, Kirin Snezana, Nikolic Ruzica, Arsić Aleksandra, Radovic Ljubica, Probabilistic approach and fault-tree analysis for increased bucket wheel excavator welded joints reliability, null, https://doi.org/10.1016/j.prostr.2022.12.023 (ISSN 2452-3216) 1-s2.0-S2452321622005807-main.pdf
|
69. Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Djordjevic Milan, Delić Marko, Application of welding for the production of ballistic protective structures, null (ISSN 2067-3809) ACTA-Rumun 2022-4-04.pdf
|
70. Ivkovic Djordje, Arsić Dušan, Prokic Cvetkovic Radica, Popovic Olivera, Nikolic Ruzica, Bokůvka Otakar, How to replace the original material for the welded structure manufacturing, null, 10.30657/pea.2023.29.42 (ISSN 2353-5156) 10.30657_pea.2023.29.42.pdf
|
71. Djordjevic Milan, Aleksandrovic Srbislav, Arsić Dušan, Nikolić Ružica R, Szmidla Janusz, Todic A., Čukanović Dragan, Ulewicz Robert, Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets, null, 10.3390/ma16113968 (ISSN 1996-1944) Materials-2023-1-15.pdf
|
72. Ivkovic Djordje, Adamovic Dragan, Arsić Dušan, Ratkovic Nada, Mitrović A., Nikolic Ruzica, Review of the advanced high-strength steels used in automotive industry, null, https://doi.org/10.24874/mvm.2023.49.03.04 (ISSN 1450-5304) Ivkovic et all paper_printed.pdf
|
73. Aleksandrovic Srbislav, Ivković Djordje, Arsić Dušan, Delić Marko, Đačić Slaviša, Djordjevic Milan, Effect of plastic strain and specimen geometry on plastic strain ratio values for various materials, null, 10.24867/ATM-2023-1-003 (ISSN 2620-0325) ATM-2023-1-13-19.pdf
|
74. Delić Marko, Mandic Vesna, Aleksandrovic Srbislav, Arsić Dušan, Ivković Djordje, Determination of the influence of FDM printing parameters on tensile strength and fracture occurrence of additively manufactured ABS material, null, International Journal of Structural Integrity, 10.1108/IJSI-03-2024-0040 (ISSN 1757-9864) 10-1108_IJSI-03-2024-0040.pdf
|
75. Ivković Djordje, Arsić Dušan, Adamovic Dragan, Nikolic Ruzica, Mitrović Anđela, Bokuvka Otakar, Predicting the mechanical properties of stainless steels using Artificial Neural Networks, null, 10.30657/pea.2024.30.21 (ISSN 2353-7779) Predicting-the-mechanical-properties-of-stainless-steels-using-Artificial-Neural-Networks.pdf
|
| |
bachelorThesis
|
1. Arsić Dušan, Ocena zavarljivosti čelika povišene jačine klase S690QL, null ZAVRSNI RAD Dusan Arsic 92-2008.pdf
|
| |
masterThesis
|
1. Arsić Dušan, Ocena zavarljivosti i izbor najpovoljnije tehnologije zavarivanja čelika povišene jačine klase S690QL, null Master rad - Dusan Arsic 361-2011.pdf
|
| |
doctoralThesis
|
1. Arsić Dušan, Otpornost na pojavu i širenje prslina u navarenim slojevima termopostojanih čelika, null Dusan Arsic - Doktorska disertacija - FINAL.pdf
|
| |
book
|
1. Lazic Vukic, Arsić Dušan, Regeneracija površina, null
|
| |
bookPart
|
1. Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Milosavljevic Dragan, Rajko Čukic, Arsić Dušan, Djordjevic Milan, Application of hard-facing in reparation of damaged forging dies, null V. Lazic et al. - Colloquium Poland 2014.pdf
|
| |
conferenceObject
|
1. Arsić Dušan, Jovanovic Veljko, Reverzni inženjering – pregled, null 52.pdf
|
2. Arsić Dušan, Jovanovic Veljko, Rekonstrukcija endoproteze zgloba kuka, null 51.pdf
|
3. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Stefanovic Milentije, Nikolic Ruzica, Arsić Dušan, Influence of lubricants on the multiphase ironing process, null Semdok paper 2.pdf
|
4. Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Marinkovic Petar, Arsić Dušan, Djordjevic Milan, Krstic Bozidar, Determination and analysis of causes for a catastrophic failure of a responsible machine part, null Degradacija materijala.pdf
|
5. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinković Petar, Djordjevic Milan, Application of high strength steel of the S690QL class for application to welded structures, null Semdok 2013 paper.pdf
|
6. Aleksandrovic Srbislav, Stefanovic Milentije, Lazic Vukic, Adamovic Dragan, Djordjevic Milan, Arsić Dušan, Different ways of friction coefficient determination in stripe ironing test, null proceedings_paper.pdf
|
7. Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Arsić Dušan, Djordjevic Milan, Milan Mutavdzic, Selection of the optimal reparation technology for working parts subjected to abrasive wear, null Paper Transcom 2013.pdf
|
8. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Milosavljevic Dragan, Krstic Bozidar, Marinkovic Petar, Djordjevic Milan, Application of high strength steels to responsible welded structures on motor vehicles, null MVM2014_paper.pdf
|
9. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Marinković Petar, Djordjevic Milan, Rajko Čukic, Optimalan metod i tehnologija zavarivanja čelika povišene jačine S690QL, null Zavarivanje 2014.pdf
|
10. Aleksandrovic Srbislav, VUJINOVIĆ Tomislav, Stefanovic Milentije, Lazic Vukic, Djordjevic Milan, Arsić Dušan, Influence of variable drawbead height and variable contact pressure in Al alloy sheet strip drawing process, null ICMEN 2014 Greece_scaned paper.pdf
|
11. Arsić Dušan, Milan Djordjevic, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Selecting the optimal welding technology of high strength steel of the S690QL class, null Semdok 2014.pdf
|
12. Arsić Dušan, Lazic Vukic, Ilic Andreja, Ivanović Lozica, Aleksandrovic Srbislav, Djordjevic Milan, Dependence of mechanical properties of the base metal and welded joint of the high strength steel S690QL on elevated temperatures, null HM paper-printed.pdf
|
13. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Optimization of welding of the truck's rear axle semi-housing, null Transcom 2015 -ceo.pdf
|
14. Ratkovic Nada, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Influence of the welding time on plastic deformation during the friction welding of the high-speed steel and steel for tempering, null Paper 2 Zvaranie 2015.pdf
|
15. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Samardzic Ivan, Hadzima Branislav, Tehnologija reparaturnog navarivanja noževa pluga za čišćenje snega, null SBZ 2015_Paper_Scan.pdf
|
16. Arsić Dušan, Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Variation of the normal anisotropy coefficient of austenitic stainless steel at elevated temperatures, null SEMDOK_2015_scan.pdf
|
17. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Hadzima Branislav, Reparation of the fractured mandrel axle-shaft by welding, null, 10.1201/b19249 M33 - Adv trends-2016-9-14.pdf
|
18. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Koteš Peter, Investigation of the lubricants influence on the ironing process, null, 10.1016/j.proeng.2015.07.069
|
19. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Bujnak Jan, Wear behavior of two different Cr based alloys for surfacing of steel parts, null AKTIV_Paper_D. Arsic et. al.pdf
|
20. Arsić Dušan, Lazic Vukic, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Marko, Mitrovic Slobodan, Djordjevic Milan, Experimental investigation of wear resistance of models hard faced with various filler metals, null Serbiatrib15 170-175.pdf
|
21. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Samardžić I., Hadzima Branislav, Tehnologija reparaturnog navarivanja noževa pluga za čišćenje snega, null Slav Brod 2015 - M63.pdf
|
22. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Hadzima Branislav, Ratkovic Nada, Profitability analysis of reparation of the construction machinery damaged parts – how to save money, null Paper 1 Zvaranie 2015.pdf
|
23. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Bujnak Jan, Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures, null, 10.1016/j.proeng.2015.07.122 1-s2.0-S1877705815013715-main.pdf
|
24. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Vičan J., Influence of tempering on the deformation level of the multi-layer hard faced samples, null, 10.1016/j.proeng.2015.07.034
|
25. Lazic Vukic, Arsić Dušan, Djordjevic Milan, Nikolic Ruzica, Hadzima Branislav, Joining of copper alloys and low-carbon steels by electrical resistance spot brazing, null ESaT2015_1105_Lazic et al_1.pdf
|
26. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Sedmak Aleksandar, Influence of friction welding parameters on mechanical properties and microstructure of the Al-Cu joint, null TEAM 2015_N. Ratkovic et. al_ISBN and paper.pdf
|
27. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Stefanovic Milentije, Milosavljevic Dragan, Two-phase ironing process in conditions of ecologic and classic lubricants application, null SERBIATRIB 2015-407-413.pdf
|
28. Lazic Vukic, Arsić Dušan, Zrilic Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Ratkovic Nada, Eksperimentalno merenje zaostalih napona u navаrenim slojevima kod termopostojanog čelika, null Zavarivanje 2016 (2).pdf
|
29. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Weldability estimation of steels for hot work by the CCT diagrams, null b19249-4 - D. Arsic et. al.pdf
|
30. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Rakić Dragan, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Selection and analysis of material for boiler pipes in a steam plant, null, 10.1016/j.proeng.2016.06.659
|
31. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Hadzima Branislav, Estimate of weldability and selection of optimal welding technology for the cover of a tube girder made of the Cr-Mn high strength steel, null Zvaranie 2016 - 17-27.pdf
|
32. Ratkovic N., Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Micro-structure in the joint friction plane in friction welding of dissimilar steels, null, 10.1016/j.proeng.2016.06.686
|
33. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Investigation of the lubrication influence on single-phase and multi-phase ironing processes, null, 10.1016/j.proeng.2016.06.636
|
34. Djordjevic Milan, Aleksandrovic Srbislav, Nikolic Ruzica, Lazic Vukic, Arsić Dušan, Influence of the variable contact pressure on the tensile force in the process of strip sliding in the flat die in ironing, null 50_SEMDOK 2016_3_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
35. Ratkovic Nada, Lazic Vukic, Arsić Dušan, Uticaj vremena trenja na oblik spoja i mikrostrukturu zone mešanja kod trenjem zavarenog spoja, null Zavarivanje 2016-rad.pdf
|
36. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Influence of the sliding speed on the wear resistance of parts hard faced by the high-alloyed filler metal which operate in conditions without lubrication, null 50_SEMDOK 2016_1_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
37. Arsić Dušan, Lazic Vukic, Aleksandrovic Srbislav, Nikolic Ruzica, Hadzima Branislav, Reparation of the fractured mandrel axle-shaft by welding, null, 10.1201/b19249-4
|
38. Lazic Vukic, Arsić Dušan, Djordjevic Milan, Nikolic Ruzica, Hadzima Branislav, Electrical resistance spot brazing of two different alloys, null, 10.1201/b19249-20
|
39. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental Determination of Residual Stresses in the Hard-faced Layers after Hard-facing and Tempering of Hot Work Steels, null, 10.1016/j.proeng.2016.08.139
|
40. Lazic Vukic, Arsić Dušan, Milan Djordjevic, Nikolic Ruzica, Hadzima Branislav, Electrical resistance spot brazing of two different alloys, null b19249-20 - V. Lazic et. al.pdf
|
41. Ratkovic Nada, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Hadzima Branislav, Influence of the contact and compacting pressures on the quality of the friction welded joint, null 50_SEMDOK 2016_2_File 1.pdf 50_SEMDOK 2016_File 2.pdf
|
42. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Hadzima Branislav, Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels, null, 10.1016/j.proeng.2016.08.139 (ISSN 1877-7058) VL PROENG printed.pdf
|
43. Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Nikolic Ruzica, Djordjevic Milan, Hadzima Branislav, Experimental investigations of the high-strength steel welded samples, null ZVÁRANIE 2017-16-28.pdf
|
44. Aleksandrovic Srbislav, Djačić S., Stefanovic Milentije, Djordjevic Milan, Lazic Vukic, Arsić Dušan, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, null DEMI 2017- pp. 77-86.pdf
|
45. Aleksandrovic Srbislav, Djačić S., Djordjevic Milan, Arsić Dušan, Lazic Vukic, Influence of process parameters on the friction coefficient in AlMg3 alloy stripe ironing drawing test, null SerbiaTrib 2017-pp 351-356.pdf
|
46. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Influence of tribological conditions and continuously variable contact pressure on the process of the thin sheet sliding during the flat-die test, null ICMEN 2017--173-182.pdf
|
47. Lazic Vukic, Arsić Dušan, Nikolic Ruzica, Arsić Miodrag, Hadzima Branislav, Procedure for selecting the low alloy-tempered steel for manufacturing the responsible highly loaded parts, null SEMDOK_2017_File 1.pdf
|
48. Arsić M., Bošnjak S., Gnjatovic N., Sedmak Simon, Arsić Dušan, Savić Z., Determination of Residual Fatigue Life of Welded Structures at Bucket-Wheel Excavators through the Use of Fracture Mechanics, null, 10.1016/j.prostr.2018.12.014
|
49. Arsić Dušan, Lazic Vukic, Palček Peter, Nikolic Ruzica, Radovic Ljubica, Ilić Nada, Selection of the optimal hard-facing technology for reparation of the machine parts made of hot work tool steel, null 5.7 FINAL D. Arsic_ IIW International Congress_BG_2018_Final.pdf
|
50. Lazic Vukic, Arsić Dušan, Rakićević Milorad, Aleksandrovic Srbislav, Djordjevic Milan, Marinkovic Petar, Ratkovic Nada, Uticaj vrste zavarenog spoja na balistička svojstva pancirnog čelika ARMOX 500T, null SPMS 2018--pp 173-177.pdf
|
51. Velickovic Sandra, Miladinovic Slavica, Stojanovic Blaza, Nikolic Ruzica, Hadzima Branislav, Arsić Dušan, Mesko J., Tribological characteristics of Al/SiC/Gr hybrid composites, null QPI 2018_File 2.PDF QPI 2018 - abstract scan.pdf
|
52. Lazic Vukic, Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Mesko J., Radovic Ljubica, Ilić Nada, Review of the hard-facing technology application for reparation of the given parts in various branches of industry, null, 10.2478/mape-2018-0035 MAPE 2018_File 2-merged.pdf
|
53. Lazic Vukic, Arsić Dušan, Ilic I., Aleksandrovic Srbislav, Nikolic Ruzica, Djordjevic Milan, Hadzima Branislav, Qualification of the welding technology of the structural steel S355J2G3, null, 10.1088/1757-899X/419/1/012019 (ISSN 1757-8981) 10.1088-1757-899X-419-1-012019.pdf
|
54. Lazic Vukic, Arsić Dušan, Sedmak Aleksandar, Nikolic Ruzica, Opačić Mirjana, Accuracy assessment of formulas for cooling time (t8/5) calculation during the welding of carbon steels, null V. Lazic et al._Ostrava.pdf
|
55. Velickovic Sandra, Miladinović Slavica, Stojanovic Blaza, Nikolic Ruzica, Hadzima Branislav, Arsić Dušan, Mesko J., Tribological characteristics of Al/SiC/Gr hybrid composites, null, 10.1051/matecconf/201818302001 10.1051-matecconf-201818302001.pdf
|
56. Aleksandrovic Srbislav, Djordjevic Milan, Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Aleksandra Pataric, MODEL KLIZANJA OBODA LIMA IZMEĐU RAVNIH KONTAKTNIH POVRŠINA U PROCESU DUBOKOG IZVLAČENJA PRI PROMENLJIVOM KONTAKTNOM PRITISKU, null SPMS 2018--pp 28-36.pdf
|
57. Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Aleksandrovic Srbislav, Djordjevic Milan, Mechanical properties of hot-work tool steel at elevated temperatures, null Arsic et. al_SEMDOK 2018 7-12.pdf
|
58. Djokovic Jelena, Nikolic Ruzica, Hadzima Branislav, Arsić Dušan, Trško L., Working life estimate of the tubular T-joint by application of the LEFM concept, null, 10.1016/j.prostr.2018.12.056 1-s2.0-S2452321618302890-main.pdf
|
59. Arsić Miodrag, Bošnjak S., Gnjatovic N., Sedmak Simon, Arsić Dušan, Savić Zoran, Determination of residual fatigue life of welded structures at bucket-wheel excavators through the use of fracture mechanics, null, Book of abstracts ECF22-Rad 1.pdf
|
60. Popovic Olivera, Prokic Cvetkovic Radica, Radovic Ljubica, Burzić Zijah, Arsić Dušan, The influence of heat input on the toughness and fracture mechanism of surface weld metal, null, Book of abstracts from 22nd European Conference on Fracture - ECF22 ECF22-Rad 4.pdf
|
61. Djokovic Jelena, Nikolic Ruzica, Hadzima Branislav, Arsić Dušan, Trško Libor, Working life estimate of the tubular T-joint by application of the LEFM concept, null, Book of abstracts from 22nd European Conference on Fracture - ECF22 ECF22-Rad 2.pdf
|
62. Arsić Dušan, Lazic Vukic, Sedmak Aleksandar, Burzić Zijah, Medjo Bojan, Nikolic Ruzica, Experimental-numerical analysis of appearance and growth of a crack in hard-faced layers of the hot-work high-strength tool steels, null, Book of abstracts from 22nd European Conference on Fracture - ECF22 ECF22-Rad 3.pdf
|
63. Popović O., Prokic-Cvetkovic R., Radović L., Burzić Z., Arsić Dušan, The influence of heat input on the toughness and fracture mechanism of surface weld metal, null, 10.1016/j.prostr.2018.12.138 2780AD.pdf
|
64. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, null TRANSCOM 2019-abstract, printed.pdf
|
65. Arsić Dušan, Nikolic Ruzica, Lazic Vukic, Arsić Aleksandra, Savić Zoran, Djačić Slaviša, Hadzima Branislav, Reparatory surface welding of the fractured tooth of the bucket‐wheel excavator girth gear, null 1212.pdf
|
66. Arsić Dušan, Nikolic Ruzica, Arsić Aleksandra, Šarkoćević Živče, Cvetković Dragan, Failure prevention and service life extension of welded pipes in oil industry, null SEMDOK_2019 File 1.PDF
|
67. Arsić Miodrag, Bošnjak S., Grabulov Vencislav, Arsić Dušan, Savić Zoran, Prediction of service life of components and structures of hydro power plants during the design, null DEMI 2019_paper.pdf
|
68. Arsić Miodrag, Grabulov Vencislav, Mladenović Milan, Arsić Dušan, Savić Zoran, Integrity evaluation for the air tank of the regulation system of turbine at hydropower plant, null M. Arsic - printed.pdf
|
69. Arsić Dušan, Milan Mutavdzic, Nikolic Ruzica, Lazic Vukic, Hadzima Branislav, Physical properties of selected rock materials, null SEMDOK_2020_Paper.PDF
|
70. Ilic Marjan, Ivkovic Djordje, Lazic Vukic, Arsić Dušan, Aleksandrovic Srbislav, Arsić Miodrag, TEORIJSKO-EKSPERIMENTANA OCENA ZAVARLJIVOSTI RAZNIH TIPOVA NAVARENIH ČELIKA, null Zavarivanje Kladovo- 2021-1-14.pdf
|
71. Todic Aleksandar, Milan Djordjevic, Lazic Vukic, Arsić Dušan, Pejović Branko, Ispitivanje promene čvrstoće u zavisnosti od količine ugljenika i vanadijuma kod visokolegiranih Cr-Mo-V čelika, null SPSM 2021 - rad A. Todic i dr..pdf
|
72. Djordjevic Milan, Aleksandrovic Srbislav, Lazic Vukic, Arsić Dušan, Pataric Aleksandra, Jelić Aleksandra, Putic Slavisa, Primena numeričke simulacije u postupku dubokog izvlačenja tankog lima sa stanjenjem na osnovu realizovanog fizičkog modela, null Zbornik radova Politehnika_izdvojeno.pdf
|
73. Aleksandrovic Srbislav, Bacanin Radovan, Delić Marko, Lazic Vukic, Arsić Dušan, Određivanje eksponenta deformacionog ojačavanja za limove od različitih materijala, null SPMS 2021 - 269-277.pdf
|
74. Lazic Vukic, Nikolic Ruzica, Arsić Dušan, Arsić M., Popović O., Prokic Cvetkovic Radica, Hadzima Branislav, Analysis of welding of the rear bridge semi-housing assembly of a firefighter truck by the semi-automatic procedure in gas protection, null, 10.1016/j.trpro.2021.07.020 (ISSN 2352-1457)
|
75. Milojević Saša, Savić Slobodan, Jovanovic Rade, Stojanovic Blaza, Arsić Dušan, Krstić Božidar, Application of liquefied natural gas in mobile systems, null Extended abstract MVM2022_printed.pdf
|
76. Ratkovic Nada, Jovanović Živana, Arsić Dušan, Pešić Miloš, Dzunic Dragan, Tool geometry effect on material flow and mixture in FSW, null Ratkovic, et al. COMETa2022.pdf
|
77. Arsić Dušan, Sedmak Aleksandar, Nikolic Ruzica, Arsić Aleksandra, Radovic Ljubica, Probabilistic approach and fault-tree analysis for increased bucket wheel excavator welded joints reliability, null ECF23 abstract.pdf
|
78. Ivković Djordje, Arsić Dušan, Milan Mutavdzic, Lazic Vukic, Aleksandrovic Srbislav, Djordjevic Milan, Importance of tribological investigations in selecting the technology for reparation of working parts of construction mechanization, null Serbiatrib2023 - Ivkovic et al..pdf
|
79. Arsić Dušan, Kirin Snezana, Arsić Aleksandra, Nikolic Ruzica, Radovic Ljubica, Improvement of reliability of the bucket-wheel excavator trough implementation of new method of fault-tree analysis, null CNN Techno Zlatibor_D. Arsic et al._Abstract.pdf
|
80. Ivkovic Djordje, Arsić Dušan, Lazic Vukic, Nikolic Ruzica, Ulewicz Robert, Procedure for replacing the material for manufacturing the responsible welded structure, null SEMDOK2023-scaned paper.pdf
|
81. Djordjevic Milan, Aleksandrovic Srbislav, Vujinovic Tomislav, Arsić Dušan, Stojanovic Aleksandar, Influence of contact conditions on the process of thin sheet sliding during the flat die test, null SRB trib 23 -- rad.pdf
|
82. Nikolic Ruzica, Ivkovic Djordje, Arsić Dušan, Lazic Vukic, Jackova Martina, Possibility of replacing low-carbon construction steels with high strength steels for producing the welded structures in heavy machinery industry, null Nikolic et al_WELDING_2023_Proceedings.pdf
|
83. Ivkovic Djordje, Arsić Dušan, Vulovic Radun, Lazic Vukic, Sedmak Aleksandar, Aleksandrovic Srbislav, Djordjevic Milan, Possibility of replacing low-carbon structural steel with high-strength steels, for producing welded structures in industry of heavy machines, null 233 Heavy Mach V Banja 2023 - B71-B78.pdf
|
84. Ivkovic Djordje, Adamovic Dragan, Arsić Dušan, Ratkovic Nada, Nikolic Ruzica, Review of the first generation of the advanced high-strength steels (AHSS) and their manufacturing procedures, null Ivkovic et al._SPMS_proceedings.pdf
|
85. Ivkovic Djordje, Arsić Dušan, Adamovic Dragan, Nikolic Ruzica, Mitrović Anđela, Bokuvka Otakar, Predicting the yield stress and tensile strength of two stainless steel using artificial intelligence, null Ivkovic et al_SEMDOK 2024.pdf
|
86. Arsić Dušan, Nikolic Ruzica, Zuziaková Ingrid, Arsić Aleksandra, Posúdenie materiálových vlastností poškodenej časti turbíny plánovanej na opravu, null D. Arsic et al-EcoMatech UNIZA.pdf
|
87. Ivkovic Djordje, Zuziakova Ingrid, Nikolic Ruzica, Arsić Dušan, Porovnanie dvoch technológií na výrobu masívnych dielov strojov, null Dj. Ivkovic et al-EcoMatech UNIZA.pdf
|
88. Ivkovic Djordje, Arsić Dušan, Andjela Mitrović, Adamovic Dragan, Milovanović Vladimir, Mandic Vesna, Delić Marko, Influence of tempering temperature on mechanical properties of G42CrMo4 cast steel, null, 10.5937/OTEH24081I Ivkovic et al._OTEH_2024.pdf
|
89. Delić Marko, Mandic Vesna, Aleksandrovic Srbislav, Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Ratkovic Nada, Influence of FDM printing parameters on the compressive mechanical properties and fracture behavior of ABS material, null ECF24 rad 2.pdf
|
90. Ivkovic Djordje, Arsić Dušan, Adamovic Dragan, Sedmak Aleksandar, Mandic Vesna, Delić Marko, Andjela Mitrović, A new artificial neural network model for predicting fatigue limit and fracture toughness values of some stainless steels, null ECF24 rad 1.pdf
|
91. Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Mandic Vesna, Delić Marko, Andjela Mitrović, Ratkovic Nada, Application of high strength steels in automotive industry, null Arsic et al.pdf
|
92. Todic Aleksandar, T. Djordjevic Milan, Arsić Dušan, Nikolic Ruzica, Ivkovic Djordje, A new artificial neural network model for predicting fatigue limit and fracture toughness values of some stainless steels, null ECF24 rad 3.pdf
|
93. Delić Marko, Mandic Vesna, Adamovic Dragan, Arsić Dušan, Ivkovic Djordje, Ratkovic Nada, Analysis of photogrammetry application possibilities for reverse engineering of components in the auto industry, null Delic et. al.pdf
|
94. Ratkovic Nada, Adamovic Dragan, Aleksandrovic Srbislav, Mandic Vesna, Arsić Dušan, Delić Marko, Jovanović Živana, Advanced welding technologies: FSW in automotive manufacturing, null N. Ratkovic et al_MVM2024.pdf
|
95. Ratkovic Nada, Adamovic Dragan, Aleksandrovic Srbislav, Mandic Vesna, Arsić Dušan, Delić Marko, Jovanović Živana, Advanced welding technologies: FSW in automotive manufacturing, null N. Ratkovic_MVM_abstract.pdf
|
96. Adamovic Dragan, Mandic Vesna, Ratkovic Nada, Arsić Dušan, Ivkovic Djordje, Delić Marko, Topalović Marko, Modern materials in automotive industry - review, null Adamovic et. al.pdf
|
97. Adamovic Dragan, Mandic Vesna, Ratkovic Nada, Arsić Dušan, Ivkovic Djordje, Delić Marko, Topalović Marko, Modern materials in automotive industry - review, null D. Adamovic_MVM_abstract.pdf
|
98. Arsić Dušan, Ivkovic Djordje, Adamovic Dragan, Mandic Vesna, Delić Marko, Andjela Mitrović, Ratkovic Nada, Application of high strength steels in automotive industry, null D. Arsic_MVM_abstract.pdf
|
99. Delić Marko, Mandic Vesna, Adamovic Dragan, Arsić Dušan, Ivkovic Djordje, Ratkovic Nada, Analysis of photogrammetry application possibilities for reverse engineering of components in the auto industry, null M. Delic_MVM_abstract.pdf
|
100. Ivkovic Djordje, Arsić Dušan, Aleksandrovic Srbislav, Lazic Vukic, Andjela Ivković, Experimental investigations of tensile properties of ultra-high strength steel S1100QL at room and elevated temperature, null Ivkovic et al._DIVK12_2024.pdf
|
101. Ivkovic Djordje, Nikolic Ruzica, Andjela Mitrović, Arsić Dušan, Bokuvka Otakar, Zuziakova Ingrid, Selecting the adequate manufacturing technology for producing the heavy and critical machine parts, null Zvaranie_2024_Paper_File 1.pdf
|
| |
technicalReport
|
1. Arsić Miodrag, Savković Mile, Lazic Vukic, Arsić Dušan, Ivanović Ivana, Tadic Srdjan, Reparatura navarivanjem oštećenog bata kovačkog čekića Huta Zygmunt MPM 5000, Tehničko rešeneje - Zastava Kovačnica a.d., Kragujevac, 2018, null МФКВ - Техничко решење M82 - Бат ковачког чекића - 2018.pdf
|
2. Cvetković Dragan, Taranović Dragan, Nešović Aleksandar, Cukovic Sasa, Arsić Dušan, Eksperimentalna instalacija za ispitivanje panelnih sistema grejanja i koncept podno-plafonskog grejanja, null M85-1.pdf
|
| |
preprint
|
1. Delić Marko, Mandic Vesna, Aleksandrovic Srbislav, Arsić Dušan, Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology, null, 10.1007/s12206-023-2309-1 (ISSN 1738-494X) JMST_paper-preprint.pdf
|
